To install or upgrade the driver type:
# rpm -Uvh Kmod-hpdsa-{kernel-flavor}-<version>.<OSupdate>.x86_64.rpm
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e Kmod-hpdsa-{kernel-flavor}-<version>.<OSupdate>.x86_64.rpm
Customer Service
For support for ProLiant Smart Array controllers, please visit
http://welcome.hp.com/country/us/en/contact_us.html
To install or upgrade the driver type:
# rpm -Uvh Kmod-hpvsa-{kernel-flavor}-<version>.<OSupdate>.i686.rpm
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e Kmod-hpvsa-{kernel-flavor}-<version>.<OSupdate>.i686.rpm
Customer Service
For support for ProLiant Smart Array controllers, please visit
http://welcome.hp.com/country/us/en/contact_us.html
To install or upgrade the driver type:
# rpm -Uvh Kmod-hpvsa-{kernel-flavor}-<version>.<OSupdate>.x86_64.rpm
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e Kmod-hpvsa-{kernel-flavor}-<version>.<OSupdate>.x86_64.rpm
Customer Service
For support for ProLiant Smart Array controllers, please visit
http://welcome.hp.com/country/us/en/contact_us.html
To install or upgrade the driver type:
# rpm -Uvh kmod-hpsa-<version>.<OSupdate>.i686.rpm
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-hpsa-<version>.<OSupdate>.i686.rpm
Customer Service
For support for ProLiant Smart Array controllers, please visit
http://welcome.hp.com/country/us/en/contact_us.html
Source code available at http://sourceforge.net/projects/cciss/files/
To install or upgrade the driver type:
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Customer Service
For support for ProLiant Smart Array controllers, please visit
http://welcome.hp.com/country/us/en/contact_us.html
Source code available at http://sourceforge.net/projects/cciss/files/
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qla2xxx-4.6.28-20.rhel6u1.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Setup is now complete. Please REBOOT your computer NOW!!
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
rpm –qp –requires hp-health-< version >.rpm
]]>To install the package type:
rpm -ivh hp-health-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-health status
Additional help is available by typing:
man hp-health
or
man hp_mgmt_install
]]>To get the list of all dependency files for hp-health, type:
rpm –qp –requires hp-health-< version >.rpm
]]>To install the package type:
rpm -ivh hp-health-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-health status
Additional help is available by typing:
man hp-health
or
man hp_mgmt_install
]]>]]>rpm –qp –-requires hp-snmp-agents-<version>.rpm
To install the package, type:
rpm -ivh hp-snmp-agents-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-snmp-agents status
Additional help is available by typing:
man hp-snmp-agents
]]>To get the list of all dependency files for hp-snmp-agents type:
rpm –qp –-requires hp-snmp-agents-<version>.rpm
]]>To install the package, type:
rpm -ivh hp-snmp-agents-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-snmp-agents status
Additional help is available by typing:
man hp-snmp-agents
]]>]]>rpm –qp –-requires hp-smh-templates-<version>.rpm
To install the package type:
rpm -ivh hp-smh-templates-<version>.rpm
To check whether the package is installed type:
rpm –q hp-smh-templates
Additional help is available by typing:
man hp-smh-templates
]]>To install the package type:
rpm -ivh hp-ams-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-ams status
Additional help is available by typing:
man hp-ams
]]>Verify that the HP iLO 4 is talking to SNMP from a Linux system with net-snmp utilities installed:
snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.1.1
Verify that HP AMS is operating on the Server:
snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.5.1
]]>To install the package type:
rpm -ivh hp-ams-<version>.rpm
To check whether the package is loaded properly type:
/etc/init.d/hp-ams status
Additional help is available by typing:
man hp-ams
]]>Verify that the HP iLO 4 is talking to SNMP from a Linux system with net-snmp utilities installed:
snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.1.1
Verify that HP AMS is operating on the Server:
snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.5.1
]]>IMPORTANT UPDATE: HPE SSA (GUI) for Linux can now be run without requiring the HPE System Management Homepage. HPE SSA now supports a Local Application Mode for Linux. The HPE System Management Homepage is still supported, but no longer required to run the HPE SSA GUI.
To invoke, enter the following at the command prompt:
hpssa -local
The command will start HP SSA in a new Firefox browser window. When the browser window is closed, HP SSA will automatically stop. This is only valid for the loopback interface, and not visible to external network connections.
For support for HPE SSA or Smart Array controllers, please visit Contact HP.
]]>IMPORTANT UPDATE: HPE SSA (GUI) for Linux can now be run without requiring the HPE System Management Homepage. HPE SSA now supports a Local Application Mode for Linux. The HPE System Management Homepage is still supported, but no longer required to run the HPE SSA GUI.
To invoke, enter the following at the command prompt:
hpssa -local
The command will start HP SSA in a new Firefox browser window. When the browser window is closed, HP SSA will automatically stop. This is only valid for the loopback interface, and not visible to external network connections.
For support for HPE SSA or Smart Array controllers, please visit Contact HP.
]]>If there is an older version of HPE SSA CLI installed on the system, please use "rpm -e hpssacli" to remove it first.
Use "rpm -i " to install the application.
]]>If there is an older version of HPE SSA CLI installed on the system, please use "rpm -e hpssacli" to remove it first.
Use "rpm -i " to install the application.
]]>If there is an older version of HPE SSADUCLI installed on the system, please use "rpm -e hpssaducli" to remove it first.
Use "rpm -i " to install the application.
]]>If there is an older version of HPE SSADUCLI installed on the system, please use "rpm -e hpssaducli" to remove it first.
Use "rpm -i " to install the application.
]]> # rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the vendor specific enablement RPM use the following command:
# rpm -ivh HP-CNA_FC-hpqlgc-enablement-<version>.noarch.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HP StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hp.com/storage/spock/
]]>
# rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the hp-fc-enablement RPM use the following command:
# rpm -ivh HP-CNA-FC-Emulex-Enablement-Kit-<version>.<OS>.<architecture>.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HP StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
The management interface driver and management agents must be installed on the server.
]]>If a previous version of the Hponcfg utility has been installed, it must be removed before this package can be installed. To remove the previous version of the package, type the following :
The management interface driver and management agents must be installed on the server.
]]>If a previous version of the Hponcfg utility has been installed, it must be removed before this package can be installed. To remove the previous version of the package, type the following :
For example, rpm -Uvh hpdiags-< version >.i586.rpm
The Insight Diagnostics package installs itself and all related files in the directory: /opt/hp/hpdiags
For other Insight Diagnostics command line options:
Note: Insight Diags can also be installed by using the SPP. See HP Service Pack for ProLiant Quick Start Guide for more information.
]]>The following component(s) are recommended for HP Insight Diagnostics Online Edition for Linux to make full use of its capabilities:
You can install them by using the SPP or downloading them individually from HP Support Center.
]]>For example, rpm -Uvh hpdiags-< version >.x86_64.rpm
The Insight Diagnostics package installs itself and all related files in the directory: /opt/hp/hpdiags
For other Insight Diagnostics command line options:
Note: Insight Diags can also be installed by using the SPP. See HP Service Pack for ProLiant Quick Start Guide for more information.
]]>