<?xml version="1.0" encoding="UTF-8"?>
<cpq_package version="2.0.1.0">
  <filename>CP029335.zip</filename>
  <divisions>
    <division key="9">
      <division_xlate lang="en">Storage</division_xlate>
      <division_xlate lang="ja">ストレージ</division_xlate>
    </division>
  </divisions>
  <operating_systems>
    <operating_system key="">
      <operating_system_xlate>VMware ESXi 5.0</operating_system_xlate>
    </operating_system>
    <operating_system key="">
      <operating_system_xlate>VMware vSphere 5.1</operating_system_xlate>
    </operating_system>
    <operating_system key="">
      <operating_system_xlate>VMware vSphere 5.5</operating_system_xlate>
    </operating_system>
    <operating_system key="">
      <operating_system_xlate>VMware vSphere 6.0</operating_system_xlate>
    </operating_system>
  </operating_systems>
  <products/>
  <category key="2900260">
    <category_xlate lang="en">Firmware - SAS Storage Disk</category_xlate>
    <category_xlate lang="ja">ファームウェア - SASストレージ ディスク</category_xlate>
  </category>
  <id product="351eaedc6bd04a7d8d32ea2c71e5eed7" version="092a916cc3d34c64a5960452e502e379"/>
  <name>
    <name_xlate lang="en">Online ROM Flash Component for VMware ESXi  - EG0300FBLSE, EG0450FBLSF, EG0600FBLSH, and EG0900FBLSK drives</name_xlate>
    <name_xlate lang="de">Online ROM Flash Component for VMware ESXi  - EG0300FBLSE, EG0450FBLSF, EG0600FBLSH, and EG0900FBLSK drives</name_xlate>
    <name_xlate lang="es">Online ROM Flash Component for VMware ESXi  - EG0300FBLSE, EG0450FBLSF, EG0600FBLSH, and EG0900FBLSK drives</name_xlate>
    <name_xlate lang="fr">Online ROM Flash Component for VMware ESXi  - EG0300FBLSE, EG0450FBLSF, EG0600FBLSH, and EG0900FBLSK drives</name_xlate>
    <name_xlate lang="it">Online ROM Flash Component for VMware ESXi  - EG0300FBLSE, EG0450FBLSF, EG0600FBLSH, and EG0900FBLSK drives</name_xlate>
    <name_xlate lang="ja">オンラインROMフラッシュコンポーネント for VMware ESXi - EG0300FBLSE、EG0450FBLSF、EG0600FBLSH、およびEG0900FBLSKドライブ</name_xlate>
  </name>
  <alt_name>
    <alt_name_xlate lang="en">EG0300FBLSE, EG0450FBLSF, EG0600FBLSH, and EG0900FBLSK drives</alt_name_xlate>
    <alt_name_xlate lang="de">EG0300FBLSE, EG0450FBLSF, EG0600FBLSH, and EG0900FBLSK drives</alt_name_xlate>
    <alt_name_xlate lang="es">EG0300FBLSE, EG0450FBLSF, EG0600FBLSH, and EG0900FBLSK drives</alt_name_xlate>
    <alt_name_xlate lang="fr">EG0300FBLSE, EG0450FBLSF, EG0600FBLSH, and EG0900FBLSK drives</alt_name_xlate>
    <alt_name_xlate lang="it">EG0300FBLSE, EG0450FBLSF, EG0600FBLSH, and EG0900FBLSK drives</alt_name_xlate>
    <alt_name_xlate lang="ja">EG0300FBLSE、EG0450FBLSF、EG0600FBLSH、およびEG0900FBLSKドライブ</alt_name_xlate>
  </alt_name>
  <version value="HPD8" revision="C" type_of_change="1"/>
  <manufacturer_name>
    <manufacturer_name_xlate lang="en">Hewlett Packard Enterprise</manufacturer_name_xlate>
    <manufacturer_name_xlate lang="ja">Hewlett Packard Enterprise</manufacturer_name_xlate>
  </manufacturer_name>
  <languages langlist="en, ja, de, fr, it, es">
    <languages_xlate lang="en">English (US), Japanese, German, French, Italian, Spanish</languages_xlate>
    <languages_xlate lang="fr">Anglais, Japonais, Allemand, Français, Italien, Espagnol</languages_xlate>
    <languages_xlate lang="de">Englisch, Japanisch, Deutsch, Französisch, Italienisch, Spanisch</languages_xlate>
    <languages_xlate lang="it">Inglese, Giapponese, Tedesco, Francese, Italiano, Spagnolo</languages_xlate>
    <languages_xlate lang="ja">英語（US）, 日本語, ドイツ語, フランス語, イタリア語, スペイン語</languages_xlate>
    <languages_xlate lang="es">Inglés, Japonés, Alemán, Francés, Italiano, Español</languages_xlate>
  </languages>
  <release_date year="2016" month="3" day="3" hour="15" minute="36" second="10"/>
  <description>
    <description_xlate lang="en">
<![CDATA[This Smart Component provides firmware for the following drive models:EG0300FBLSE, EG0450FBLSF, EG0600FBLSH, and EG0900FBLSK]]>
</description_xlate>
    <description_xlate lang="de">
<![CDATA[This Smart Component provides firmware for the following drive models:EG0300FBLSE, EG0450FBLSF, EG0600FBLSH, and EG0900FBLSK]]>
</description_xlate>
    <description_xlate lang="es">
<![CDATA[This Smart Component provides firmware for the following drive models:EG0300FBLSE, EG0450FBLSF, EG0600FBLSH, and EG0900FBLSK]]>
</description_xlate>
    <description_xlate lang="fr">
<![CDATA[This Smart Component provides firmware for the following drive models:EG0300FBLSE, EG0450FBLSF, EG0600FBLSH, and EG0900FBLSK]]>
</description_xlate>
    <description_xlate lang="it">
<![CDATA[This Smart Component provides firmware for the following drive models:EG0300FBLSE, EG0450FBLSF, EG0600FBLSH, and EG0900FBLSK]]>
</description_xlate>
    <description_xlate lang="ja">
<![CDATA[このSmartコンポーネントは、ドライブモデルEG0300FBLSE、EG0450FBLSF、EG0600FBLSH、およびEG0900FBLSKのファームウェアを提供します。]]>
</description_xlate>
  </description>
  <prerequisite_notes/>
  <installation_notes>
    <installation_notes_xlate lang="en">
      <installation_notes_xlate_part>
<![CDATA[<p><strong>To use HP Smart Update Manager from the HPE Service Pack for ProLiant:<br />
<br />
&nbsp;&nbsp;&nbsp;&nbsp; Offline (</strong>The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components<strong>):</strong></p>

<ul>
	<li>Place the <a href="https://www.hpe.com/servers/spp/download">HPE Service Pack for ProLiant</a> on a USB key using the <a href="https://www.hp.com/swpublishing/MTX-357c87ee9b054ad7a631d9eaba">HPE USB Key Creator Utility</a>.</li>
	<li>Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.</li>
	<li>Boot from the newly created HPE Service Pack for ProLiant USB key.</li>
	<li>Follow HP Smart Update Manager steps to complete firmware update.</li>
</ul>

<p><strong>&nbsp;&nbsp;&nbsp;&nbsp; Remote Online:</strong></p>

<ul>
	<li>Download the appropriate SPP.</li>
	<li>Add the component to the SPP.</li>
	<li>Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.</li>
	<li>Run HP SUM.</li>
	<li>Add the ESXi host to be updated as a remote target/node.</li>
	<li>Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).</li>
	<li><strong>For HP SUM 6.0 and newer</strong>, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.</li>
	<li>Follow HP Smart Update Manager Steps and complete the firmware update.</li>
</ul>

<p>Refer to the SPP documentation for detailed instructions at: <a href="https://www.hpe.com/servers/spp">https://www.hpe.com/servers/spp</a><br />
&nbsp;<br />
<strong>To use HP Insight Control for vCenter :</strong></p>

<ul>
	<li>Log in to the vSphere Client.</li>
	<li>Select a server or cluster in the inventory tree.</li>
	<li>Click the HP Insight Management tab.</li>
	<li>Follow Insight Control for vCenter steps to update firmware using a Smart Component</li>
</ul>

<p><strong>To update firmware from VMware ESXi operating system on target server:</strong></p>

<ul>
	<li>Enable Tech Support Mode on the ESXi host.</li>
	<li>Login as root. (You must be root in order to apply the update.)</li>
	<li>Place the Smart Component zip file in a temporary directory.</li>
	<li>Unzip the file CPXXXXXX.zip</li>
	<li>Ensure that CPXXXXXX.vmexe is executable by using the command:</li>
</ul>

<p style="margin-left:60.0pt">chmod +x CPXXXXXX.vmexe&nbsp;&nbsp;&nbsp;&nbsp;</p>

<ul>
	<li>From the same directory, execute the Smart Component. For example: ./CPXXXXXX.vmexe</li>
	<li>Follow the directions given by the Smart Component.</li>
	<li>Logout</li>
	<li>Disable Tech Support Mode on the ESXi host.</li>
</ul>

<p>Reboot your system, if required, for the firmware update to take effect.</p>
]]>
</installation_notes_xlate_part>
    </installation_notes_xlate>
    <installation_notes_xlate lang="de">
      <installation_notes_xlate_part>
<![CDATA[<p><strong>To use HP Smart Update Manager from the HPE Service Pack for ProLiant:<br />
<br />
&nbsp;&nbsp;&nbsp;&nbsp; Offline (</strong>The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components<strong>):</strong></p>

<ul>
	<li>Place the <a href="https://www.hpe.com/servers/spp/download">HPE Service Pack for ProLiant</a> on a USB key using the <a href="https://www.hp.com/swpublishing/MTX-357c87ee9b054ad7a631d9eaba">HPE USB Key Creator Utility</a>.</li>
	<li>Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.</li>
	<li>Boot from the newly created HPE Service Pack for ProLiant USB key.</li>
	<li>Follow HP Smart Update Manager steps to complete firmware update.</li>
</ul>

<p><strong>&nbsp;&nbsp;&nbsp;&nbsp; Remote Online:</strong></p>

<ul>
	<li>Download the appropriate SPP.</li>
	<li>Add the component to the SPP.</li>
	<li>Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.</li>
	<li>Run HP SUM.</li>
	<li>Add the ESXi host to be updated as a remote target/node.</li>
	<li>Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).</li>
	<li><strong>For HP SUM 6.0 and newer</strong>, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.</li>
	<li>Follow HP Smart Update Manager Steps and complete the firmware update.</li>
</ul>

<p>Refer to the SPP documentation for detailed instructions at: <a href="https://www.hpe.com/servers/spp">https://www.hpe.com/servers/spp</a><br />
&nbsp;<br />
<strong>To use HP Insight Control for vCenter :</strong></p>

<ul>
	<li>Log in to the vSphere Client.</li>
	<li>Select a server or cluster in the inventory tree.</li>
	<li>Click the HP Insight Management tab.</li>
	<li>Follow Insight Control for vCenter steps to update firmware using a Smart Component</li>
</ul>

<p><strong>To update firmware from VMware ESXi operating system on target server:</strong></p>

<ul>
	<li>Enable Tech Support Mode on the ESXi host.</li>
	<li>Login as root. (You must be root in order to apply the update.)</li>
	<li>Place the Smart Component zip file in a temporary directory.</li>
	<li>Unzip the file CPXXXXXX.zip</li>
	<li>Ensure that CPXXXXXX.vmexe is executable by using the command:</li>
</ul>

<p style="margin-left:60.0pt">chmod +x CPXXXXXX.vmexe&nbsp;&nbsp;&nbsp;&nbsp;</p>

<ul>
	<li>From the same directory, execute the Smart Component. For example: ./CPXXXXXX.vmexe</li>
	<li>Follow the directions given by the Smart Component.</li>
	<li>Logout</li>
	<li>Disable Tech Support Mode on the ESXi host.</li>
</ul>

<p>Reboot your system, if required, for the firmware update to take effect.</p>
]]>
</installation_notes_xlate_part>
    </installation_notes_xlate>
    <installation_notes_xlate lang="es">
      <installation_notes_xlate_part>
<![CDATA[<p><strong>To use HP Smart Update Manager from the HPE Service Pack for ProLiant:<br />
<br />
&nbsp;&nbsp;&nbsp;&nbsp; Offline (</strong>The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components<strong>):</strong></p>

<ul>
	<li>Place the <a href="https://www.hpe.com/servers/spp/download">HPE Service Pack for ProLiant</a> on a USB key using the <a href="https://www.hp.com/swpublishing/MTX-357c87ee9b054ad7a631d9eaba">HPE USB Key Creator Utility</a>.</li>
	<li>Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.</li>
	<li>Boot from the newly created HPE Service Pack for ProLiant USB key.</li>
	<li>Follow HP Smart Update Manager steps to complete firmware update.</li>
</ul>

<p><strong>&nbsp;&nbsp;&nbsp;&nbsp; Remote Online:</strong></p>

<ul>
	<li>Download the appropriate SPP.</li>
	<li>Add the component to the SPP.</li>
	<li>Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.</li>
	<li>Run HP SUM.</li>
	<li>Add the ESXi host to be updated as a remote target/node.</li>
	<li>Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).</li>
	<li><strong>For HP SUM 6.0 and newer</strong>, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.</li>
	<li>Follow HP Smart Update Manager Steps and complete the firmware update.</li>
</ul>

<p>Refer to the SPP documentation for detailed instructions at: <a href="https://www.hpe.com/servers/spp">https://www.hpe.com/servers/spp</a><br />
&nbsp;<br />
<strong>To use HP Insight Control for vCenter :</strong></p>

<ul>
	<li>Log in to the vSphere Client.</li>
	<li>Select a server or cluster in the inventory tree.</li>
	<li>Click the HP Insight Management tab.</li>
	<li>Follow Insight Control for vCenter steps to update firmware using a Smart Component</li>
</ul>

<p><strong>To update firmware from VMware ESXi operating system on target server:</strong></p>

<ul>
	<li>Enable Tech Support Mode on the ESXi host.</li>
	<li>Login as root. (You must be root in order to apply the update.)</li>
	<li>Place the Smart Component zip file in a temporary directory.</li>
	<li>Unzip the file CPXXXXXX.zip</li>
	<li>Ensure that CPXXXXXX.vmexe is executable by using the command:</li>
</ul>

<p style="margin-left:60.0pt">chmod +x CPXXXXXX.vmexe&nbsp;&nbsp;&nbsp;&nbsp;</p>

<ul>
	<li>From the same directory, execute the Smart Component. For example: ./CPXXXXXX.vmexe</li>
	<li>Follow the directions given by the Smart Component.</li>
	<li>Logout</li>
	<li>Disable Tech Support Mode on the ESXi host.</li>
</ul>

<p>Reboot your system, if required, for the firmware update to take effect.</p>
]]>
</installation_notes_xlate_part>
    </installation_notes_xlate>
    <installation_notes_xlate lang="fr">
      <installation_notes_xlate_part>
<![CDATA[<p><strong>To use HP Smart Update Manager from the HPE Service Pack for ProLiant:<br />
<br />
&nbsp;&nbsp;&nbsp;&nbsp; Offline (</strong>The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components<strong>):</strong></p>

<ul>
	<li>Place the <a href="https://www.hpe.com/servers/spp/download">HPE Service Pack for ProLiant</a> on a USB key using the <a href="https://www.hp.com/swpublishing/MTX-357c87ee9b054ad7a631d9eaba">HPE USB Key Creator Utility</a>.</li>
	<li>Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.</li>
	<li>Boot from the newly created HPE Service Pack for ProLiant USB key.</li>
	<li>Follow HP Smart Update Manager steps to complete firmware update.</li>
</ul>

<p><strong>&nbsp;&nbsp;&nbsp;&nbsp; Remote Online:</strong></p>

<ul>
	<li>Download the appropriate SPP.</li>
	<li>Add the component to the SPP.</li>
	<li>Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.</li>
	<li>Run HP SUM.</li>
	<li>Add the ESXi host to be updated as a remote target/node.</li>
	<li>Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).</li>
	<li><strong>For HP SUM 6.0 and newer</strong>, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.</li>
	<li>Follow HP Smart Update Manager Steps and complete the firmware update.</li>
</ul>

<p>Refer to the SPP documentation for detailed instructions at: <a href="https://www.hpe.com/servers/spp">https://www.hpe.com/servers/spp</a><br />
&nbsp;<br />
<strong>To use HP Insight Control for vCenter :</strong></p>

<ul>
	<li>Log in to the vSphere Client.</li>
	<li>Select a server or cluster in the inventory tree.</li>
	<li>Click the HP Insight Management tab.</li>
	<li>Follow Insight Control for vCenter steps to update firmware using a Smart Component</li>
</ul>

<p><strong>To update firmware from VMware ESXi operating system on target server:</strong></p>

<ul>
	<li>Enable Tech Support Mode on the ESXi host.</li>
	<li>Login as root. (You must be root in order to apply the update.)</li>
	<li>Place the Smart Component zip file in a temporary directory.</li>
	<li>Unzip the file CPXXXXXX.zip</li>
	<li>Ensure that CPXXXXXX.vmexe is executable by using the command:</li>
</ul>

<p style="margin-left:60.0pt">chmod +x CPXXXXXX.vmexe&nbsp;&nbsp;&nbsp;&nbsp;</p>

<ul>
	<li>From the same directory, execute the Smart Component. For example: ./CPXXXXXX.vmexe</li>
	<li>Follow the directions given by the Smart Component.</li>
	<li>Logout</li>
	<li>Disable Tech Support Mode on the ESXi host.</li>
</ul>

<p>Reboot your system, if required, for the firmware update to take effect.</p>
]]>
</installation_notes_xlate_part>
    </installation_notes_xlate>
    <installation_notes_xlate lang="it">
      <installation_notes_xlate_part>
<![CDATA[<p><strong>To use HP Smart Update Manager from the HPE Service Pack for ProLiant:<br />
<br />
&nbsp;&nbsp;&nbsp;&nbsp; Offline (</strong>The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components<strong>):</strong></p>

<ul>
	<li>Place the <a href="https://www.hpe.com/servers/spp/download">HPE Service Pack for ProLiant</a> on a USB key using the <a href="https://www.hp.com/swpublishing/MTX-357c87ee9b054ad7a631d9eaba">HPE USB Key Creator Utility</a>.</li>
	<li>Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.</li>
	<li>Boot from the newly created HPE Service Pack for ProLiant USB key.</li>
	<li>Follow HP Smart Update Manager steps to complete firmware update.</li>
</ul>

<p><strong>&nbsp;&nbsp;&nbsp;&nbsp; Remote Online:</strong></p>

<ul>
	<li>Download the appropriate SPP.</li>
	<li>Add the component to the SPP.</li>
	<li>Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.</li>
	<li>Run HP SUM.</li>
	<li>Add the ESXi host to be updated as a remote target/node.</li>
	<li>Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).</li>
	<li><strong>For HP SUM 6.0 and newer</strong>, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.</li>
	<li>Follow HP Smart Update Manager Steps and complete the firmware update.</li>
</ul>

<p>Refer to the SPP documentation for detailed instructions at: <a href="https://www.hpe.com/servers/spp">https://www.hpe.com/servers/spp</a><br />
&nbsp;<br />
<strong>To use HP Insight Control for vCenter :</strong></p>

<ul>
	<li>Log in to the vSphere Client.</li>
	<li>Select a server or cluster in the inventory tree.</li>
	<li>Click the HP Insight Management tab.</li>
	<li>Follow Insight Control for vCenter steps to update firmware using a Smart Component</li>
</ul>

<p><strong>To update firmware from VMware ESXi operating system on target server:</strong></p>

<ul>
	<li>Enable Tech Support Mode on the ESXi host.</li>
	<li>Login as root. (You must be root in order to apply the update.)</li>
	<li>Place the Smart Component zip file in a temporary directory.</li>
	<li>Unzip the file CPXXXXXX.zip</li>
	<li>Ensure that CPXXXXXX.vmexe is executable by using the command:</li>
</ul>

<p style="margin-left:60.0pt">chmod +x CPXXXXXX.vmexe&nbsp;&nbsp;&nbsp;&nbsp;</p>

<ul>
	<li>From the same directory, execute the Smart Component. For example: ./CPXXXXXX.vmexe</li>
	<li>Follow the directions given by the Smart Component.</li>
	<li>Logout</li>
	<li>Disable Tech Support Mode on the ESXi host.</li>
</ul>

<p>Reboot your system, if required, for the firmware update to take effect.</p>
]]>
</installation_notes_xlate_part>
    </installation_notes_xlate>
    <installation_notes_xlate lang="ja">
      <installation_notes_xlate_part>
<![CDATA[<p><strong>To use HP Smart Update Manager from the HPE Service Pack for ProLiant:<br />
<br />
&nbsp;&nbsp;&nbsp;&nbsp; Offline (</strong>The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components<strong>):</strong></p>

<ul>
	<li>Place the <a href="https://www.hpe.com/servers/spp/download">HPE Service Pack for ProLiant</a> on a USB key using the <a href="https://www.hp.com/swpublishing/MTX-357c87ee9b054ad7a631d9eaba">HPE USB Key Creator Utility</a>.</li>
	<li>Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.</li>
	<li>Boot from the newly created HPE Service Pack for ProLiant USB key.</li>
	<li>Follow HP Smart Update Manager steps to complete firmware update.</li>
</ul>

<p><strong>&nbsp;&nbsp;&nbsp;&nbsp; Remote Online:</strong></p>

<ul>
	<li>Download the appropriate SPP.</li>
	<li>Add the component to the SPP.</li>
	<li>Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.</li>
	<li>Run HP SUM.</li>
	<li>Add the ESXi host to be updated as a remote target/node.</li>
	<li>Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).</li>
	<li><strong>For HP SUM 6.0 and newer</strong>, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.</li>
	<li>Follow HP Smart Update Manager Steps and complete the firmware update.</li>
</ul>

<p>Refer to the SPP documentation for detailed instructions at: <a href="https://www.hpe.com/servers/spp">https://www.hpe.com/servers/spp</a><br />
&nbsp;<br />
<strong>To use HP Insight Control for vCenter :</strong></p>

<ul>
	<li>Log in to the vSphere Client.</li>
	<li>Select a server or cluster in the inventory tree.</li>
	<li>Click the HP Insight Management tab.</li>
	<li>Follow Insight Control for vCenter steps to update firmware using a Smart Component</li>
</ul>

<p><strong>To update firmware from VMware ESXi operating system on target server:</strong></p>

<ul>
	<li>Enable Tech Support Mode on the ESXi host.</li>
	<li>Login as root. (You must be root in order to apply the update.)</li>
	<li>Place the Smart Component zip file in a temporary directory.</li>
	<li>Unzip the file CPXXXXXX.zip</li>
	<li>Ensure that CPXXXXXX.vmexe is executable by using the command:</li>
</ul>

<p style="margin-left:60.0pt">chmod +x CPXXXXXX.vmexe&nbsp;&nbsp;&nbsp;&nbsp;</p>

<ul>
	<li>From the same directory, execute the Smart Component. For example: ./CPXXXXXX.vmexe</li>
	<li>Follow the directions given by the Smart Component.</li>
	<li>Logout</li>
	<li>Disable Tech Support Mode on the ESXi host.</li>
</ul>

<p>Reboot your system, if required, for the firmware update to take effect.</p>
]]>
</installation_notes_xlate_part>
    </installation_notes_xlate>
  </installation_notes>
  <availability_notes/>
  <documentation_notes>
    <documentation_notes_xlate lang="en">
      <documentation_notes_xlate_part>
<![CDATA[<p><strong>Deliverable Name:</strong><br />
&nbsp;&nbsp;&nbsp;Online ROM Flash Component for&nbsp;VMware ESXi - EG0300FBLSE, EG0450FBLSF, EG0600FBLSH, and EG0900FBLSK drives<br />
<br />
<strong>Release Version and/or Date:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;HPD8<br />
<br />
<strong>Last Recommended or Critical Version:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;HPD7<br />
<br />
<strong>Previous Version of Firmware:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;HPD7<br />
<br />
<strong>Firmware Dependency:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;None<br />
<br />
<strong>Enhancements/New Features for HPD8 (B):</strong></p>

<ul>
	<li>VMware Firmware Smart component packaging has changed from a *.scexe package to a *.zip package, which contains an executable binary that provides enhanced security during installation. The functionality of the VMware Smart Component has not changed.</li>
</ul>

<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>HP ProLiant servers would power down due a hard drive overtemp condition that was falsely reported. Hard disk drive firmware HPD8 resolves this issue.</li>
</ul>

<p><strong>Problems Fixed for HPD8 (C):</strong></p>

<ul>
	<li>Component would fail to install drive firmware for drives present in a system configured with two or more external drive enclosures attached to an HP Host Bus Adapter H22x. The following message would be reported in the component log file - &ldquo;Device appears more than once in tree&rdquo;. The drive firmware installation failure was not observed in configurations having only one external drive enclosure attached to an HP Host Bus Adapter H22x.</li>
</ul>

<p><strong>Known Issues:<br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</strong>None</p>
]]>
</documentation_notes_xlate_part>
    </documentation_notes_xlate>
    <documentation_notes_xlate lang="de">
      <documentation_notes_xlate_part>
<![CDATA[<p><strong>Deliverable Name:</strong><br />
&nbsp;&nbsp;&nbsp;Online ROM Flash Component for&nbsp;VMware ESXi - EG0300FBLSE, EG0450FBLSF, EG0600FBLSH, and EG0900FBLSK drives<br />
<br />
<strong>Release Version and/or Date:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;HPD8<br />
<br />
<strong>Last Recommended or Critical Version:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;HPD7<br />
<br />
<strong>Previous Version of Firmware:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;HPD7<br />
<br />
<strong>Firmware Dependency:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;None<br />
<br />
<strong>Enhancements/New Features for HPD8 (B):</strong></p>

<ul>
	<li>VMware Firmware Smart component packaging has changed from a *.scexe package to a *.zip package, which contains an executable binary that provides enhanced security during installation. The functionality of the VMware Smart Component has not changed.</li>
</ul>

<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>HP ProLiant servers would power down due a hard drive overtemp condition that was falsely reported. Hard disk drive firmware HPD8 resolves this issue.</li>
</ul>

<p><strong>Problems Fixed for HPD8 (C):</strong></p>

<ul>
	<li>Component would fail to install drive firmware for drives present in a system configured with two or more external drive enclosures attached to an HP Host Bus Adapter H22x. The following message would be reported in the component log file - &ldquo;Device appears more than once in tree&rdquo;. The drive firmware installation failure was not observed in configurations having only one external drive enclosure attached to an HP Host Bus Adapter H22x.</li>
</ul>

<p><strong>Known Issues:<br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</strong>None</p>
]]>
</documentation_notes_xlate_part>
    </documentation_notes_xlate>
    <documentation_notes_xlate lang="es">
      <documentation_notes_xlate_part>
<![CDATA[<p><strong>Deliverable Name:</strong><br />
&nbsp;&nbsp;&nbsp;Online ROM Flash Component for&nbsp;VMware ESXi - EG0300FBLSE, EG0450FBLSF, EG0600FBLSH, and EG0900FBLSK drives<br />
<br />
<strong>Release Version and/or Date:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;HPD8<br />
<br />
<strong>Last Recommended or Critical Version:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;HPD7<br />
<br />
<strong>Previous Version of Firmware:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;HPD7<br />
<br />
<strong>Firmware Dependency:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;None<br />
<br />
<strong>Enhancements/New Features for HPD8 (B):</strong></p>

<ul>
	<li>VMware Firmware Smart component packaging has changed from a *.scexe package to a *.zip package, which contains an executable binary that provides enhanced security during installation. The functionality of the VMware Smart Component has not changed.</li>
</ul>

<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>HP ProLiant servers would power down due a hard drive overtemp condition that was falsely reported. Hard disk drive firmware HPD8 resolves this issue.</li>
</ul>

<p><strong>Problems Fixed for HPD8 (C):</strong></p>

<ul>
	<li>Component would fail to install drive firmware for drives present in a system configured with two or more external drive enclosures attached to an HP Host Bus Adapter H22x. The following message would be reported in the component log file - &ldquo;Device appears more than once in tree&rdquo;. The drive firmware installation failure was not observed in configurations having only one external drive enclosure attached to an HP Host Bus Adapter H22x.</li>
</ul>

<p><strong>Known Issues:<br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</strong>None</p>
]]>
</documentation_notes_xlate_part>
    </documentation_notes_xlate>
    <documentation_notes_xlate lang="fr">
      <documentation_notes_xlate_part>
<![CDATA[<p><strong>Deliverable Name:</strong><br />
&nbsp;&nbsp;&nbsp;Online ROM Flash Component for&nbsp;VMware ESXi - EG0300FBLSE, EG0450FBLSF, EG0600FBLSH, and EG0900FBLSK drives<br />
<br />
<strong>Release Version and/or Date:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;HPD8<br />
<br />
<strong>Last Recommended or Critical Version:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;HPD7<br />
<br />
<strong>Previous Version of Firmware:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;HPD7<br />
<br />
<strong>Firmware Dependency:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;None<br />
<br />
<strong>Enhancements/New Features for HPD8 (B):</strong></p>

<ul>
	<li>VMware Firmware Smart component packaging has changed from a *.scexe package to a *.zip package, which contains an executable binary that provides enhanced security during installation. The functionality of the VMware Smart Component has not changed.</li>
</ul>

<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>HP ProLiant servers would power down due a hard drive overtemp condition that was falsely reported. Hard disk drive firmware HPD8 resolves this issue.</li>
</ul>

<p><strong>Problems Fixed for HPD8 (C):</strong></p>

<ul>
	<li>Component would fail to install drive firmware for drives present in a system configured with two or more external drive enclosures attached to an HP Host Bus Adapter H22x. The following message would be reported in the component log file - &ldquo;Device appears more than once in tree&rdquo;. The drive firmware installation failure was not observed in configurations having only one external drive enclosure attached to an HP Host Bus Adapter H22x.</li>
</ul>

<p><strong>Known Issues:<br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</strong>None</p>
]]>
</documentation_notes_xlate_part>
    </documentation_notes_xlate>
    <documentation_notes_xlate lang="it">
      <documentation_notes_xlate_part>
<![CDATA[<p><strong>Deliverable Name:</strong><br />
&nbsp;&nbsp;&nbsp;Online ROM Flash Component for&nbsp;VMware ESXi - EG0300FBLSE, EG0450FBLSF, EG0600FBLSH, and EG0900FBLSK drives<br />
<br />
<strong>Release Version and/or Date:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;HPD8<br />
<br />
<strong>Last Recommended or Critical Version:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;HPD7<br />
<br />
<strong>Previous Version of Firmware:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;HPD7<br />
<br />
<strong>Firmware Dependency:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;None<br />
<br />
<strong>Enhancements/New Features for HPD8 (B):</strong></p>

<ul>
	<li>VMware Firmware Smart component packaging has changed from a *.scexe package to a *.zip package, which contains an executable binary that provides enhanced security during installation. The functionality of the VMware Smart Component has not changed.</li>
</ul>

<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>HP ProLiant servers would power down due a hard drive overtemp condition that was falsely reported. Hard disk drive firmware HPD8 resolves this issue.</li>
</ul>

<p><strong>Problems Fixed for HPD8 (C):</strong></p>

<ul>
	<li>Component would fail to install drive firmware for drives present in a system configured with two or more external drive enclosures attached to an HP Host Bus Adapter H22x. The following message would be reported in the component log file - &ldquo;Device appears more than once in tree&rdquo;. The drive firmware installation failure was not observed in configurations having only one external drive enclosure attached to an HP Host Bus Adapter H22x.</li>
</ul>

<p><strong>Known Issues:<br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</strong>None</p>
]]>
</documentation_notes_xlate_part>
    </documentation_notes_xlate>
    <documentation_notes_xlate lang="ja">
      <documentation_notes_xlate_part>
<![CDATA[<p><strong>Deliverable Name:</strong><br />
&nbsp;&nbsp;&nbsp;Online ROM Flash Component for&nbsp;VMware ESXi - EG0300FBLSE, EG0450FBLSF, EG0600FBLSH, and EG0900FBLSK drives<br />
<br />
<strong>Release Version and/or Date:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;HPD8<br />
<br />
<strong>Last Recommended or Critical Version:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;HPD7<br />
<br />
<strong>Previous Version of Firmware:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;HPD7<br />
<br />
<strong>Firmware Dependency:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;None<br />
<br />
<strong>Enhancements/New Features for HPD8 (B):</strong></p>

<ul>
	<li>VMware Firmware Smart component packaging has changed from a *.scexe package to a *.zip package, which contains an executable binary that provides enhanced security during installation. The functionality of the VMware Smart Component has not changed.</li>
</ul>

<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>HP ProLiant servers would power down due a hard drive overtemp condition that was falsely reported. Hard disk drive firmware HPD8 resolves this issue.</li>
</ul>

<p><strong>Problems Fixed for HPD8 (C):</strong></p>

<ul>
	<li>Component would fail to install drive firmware for drives present in a system configured with two or more external drive enclosures attached to an HP Host Bus Adapter H22x. The following message would be reported in the component log file - &ldquo;Device appears more than once in tree&rdquo;. The drive firmware installation failure was not observed in configurations having only one external drive enclosure attached to an HP Host Bus Adapter H22x.</li>
</ul>

<p><strong>Known Issues:<br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</strong>None</p>
]]>
</documentation_notes_xlate_part>
    </documentation_notes_xlate>
  </documentation_notes>
  <revision_history>
    <revision>
      <version value="HPD8" revision="C" type_of_change="1"/>
      <revision_enhancements_xlate lang="en">
        <revision_enhancements_xlate_part>
<![CDATA[<p><strong>Enhancements/New Features for HPD8 (B):</strong></p>

<ul>
	<li>VMware Firmware Smart component packaging has changed from a *.scexe package to a *.zip package, which contains an executable binary that provides enhanced security during installation. The functionality of the VMware Smart Component has not changed.</li>
</ul>
]]>
</revision_enhancements_xlate_part>
      </revision_enhancements_xlate>
      <revision_enhancements_xlate lang="de">
        <revision_enhancements_xlate_part>
<![CDATA[<p><strong>Enhancements/New Features for HPD8 (B):</strong></p>

<ul>
	<li>VMware Firmware Smart component packaging has changed from a *.scexe package to a *.zip package, which contains an executable binary that provides enhanced security during installation. The functionality of the VMware Smart Component has not changed.</li>
</ul>
]]>
</revision_enhancements_xlate_part>
      </revision_enhancements_xlate>
      <revision_enhancements_xlate lang="es">
        <revision_enhancements_xlate_part>
<![CDATA[<p><strong>Enhancements/New Features for HPD8 (B):</strong></p>

<ul>
	<li>VMware Firmware Smart component packaging has changed from a *.scexe package to a *.zip package, which contains an executable binary that provides enhanced security during installation. The functionality of the VMware Smart Component has not changed.</li>
</ul>
]]>
</revision_enhancements_xlate_part>
      </revision_enhancements_xlate>
      <revision_enhancements_xlate lang="fr">
        <revision_enhancements_xlate_part>
<![CDATA[<p><strong>Enhancements/New Features for HPD8 (B):</strong></p>

<ul>
	<li>VMware Firmware Smart component packaging has changed from a *.scexe package to a *.zip package, which contains an executable binary that provides enhanced security during installation. The functionality of the VMware Smart Component has not changed.</li>
</ul>
]]>
</revision_enhancements_xlate_part>
      </revision_enhancements_xlate>
      <revision_enhancements_xlate lang="it">
        <revision_enhancements_xlate_part>
<![CDATA[<p><strong>Enhancements/New Features for HPD8 (B):</strong></p>

<ul>
	<li>VMware Firmware Smart component packaging has changed from a *.scexe package to a *.zip package, which contains an executable binary that provides enhanced security during installation. The functionality of the VMware Smart Component has not changed.</li>
</ul>
]]>
</revision_enhancements_xlate_part>
      </revision_enhancements_xlate>
      <revision_enhancements_xlate lang="ja">
        <revision_enhancements_xlate_part>
<![CDATA[<p><strong>HPD8 (B)の改善点/新しい機能：</strong></p>

<ul>
	<li>VMware Firmware Smartコンポーネントパッケージは、*.scexeパッケージからインストール中のセキュリティの強化を提供する実行可能なバイナリを含む、*.zipパッケージに変更されました。 VMware Smartコンポーネントの機能は変更されていません。</li>
</ul>
]]>
</revision_enhancements_xlate_part>
      </revision_enhancements_xlate>
      <revision_fixes_xlate lang="en">
        <revision_fixes_xlate_part>
<![CDATA[<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>HP ProLiant servers would power down due a hard drive overtemp condition that was falsely reported. Hard disk drive firmware HPD8 resolves this issue.</li>
</ul>

<p><strong>Problems Fixed for HPD8 (C):</strong></p>

<ul>
	<li>Component would fail to install drive firmware for drives present in a system configured with two or more external drive enclosures attached to an HP Host Bus Adapter H22x. The following message would be reported in the component log file - &ldquo;Device appears more than once in tree&rdquo;. The drive firmware installation failure was not observed in configurations having only one external drive enclosure attached to an HP Host Bus Adapter H22x.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="de">
        <revision_fixes_xlate_part>
<![CDATA[<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>HP ProLiant servers would power down due a hard drive overtemp condition that was falsely reported. Hard disk drive firmware HPD8 resolves this issue.</li>
</ul>

<p><strong>Problems Fixed for HPD8 (C):</strong></p>

<ul>
	<li>Component would fail to install drive firmware for drives present in a system configured with two or more external drive enclosures attached to an HP Host Bus Adapter H22x. The following message would be reported in the component log file - &ldquo;Device appears more than once in tree&rdquo;. The drive firmware installation failure was not observed in configurations having only one external drive enclosure attached to an HP Host Bus Adapter H22x.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="es">
        <revision_fixes_xlate_part>
<![CDATA[<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>HP ProLiant servers would power down due a hard drive overtemp condition that was falsely reported. Hard disk drive firmware HPD8 resolves this issue.</li>
</ul>

<p><strong>Problems Fixed for HPD8 (C):</strong></p>

<ul>
	<li>Component would fail to install drive firmware for drives present in a system configured with two or more external drive enclosures attached to an HP Host Bus Adapter H22x. The following message would be reported in the component log file - &ldquo;Device appears more than once in tree&rdquo;. The drive firmware installation failure was not observed in configurations having only one external drive enclosure attached to an HP Host Bus Adapter H22x.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="fr">
        <revision_fixes_xlate_part>
<![CDATA[<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>HP ProLiant servers would power down due a hard drive overtemp condition that was falsely reported. Hard disk drive firmware HPD8 resolves this issue.</li>
</ul>

<p><strong>Problems Fixed for HPD8 (C):</strong></p>

<ul>
	<li>Component would fail to install drive firmware for drives present in a system configured with two or more external drive enclosures attached to an HP Host Bus Adapter H22x. The following message would be reported in the component log file - &ldquo;Device appears more than once in tree&rdquo;. The drive firmware installation failure was not observed in configurations having only one external drive enclosure attached to an HP Host Bus Adapter H22x.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="it">
        <revision_fixes_xlate_part>
<![CDATA[<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>HP ProLiant servers would power down due a hard drive overtemp condition that was falsely reported. Hard disk drive firmware HPD8 resolves this issue.</li>
</ul>

<p><strong>Problems Fixed for HPD8 (C):</strong></p>

<ul>
	<li>Component would fail to install drive firmware for drives present in a system configured with two or more external drive enclosures attached to an HP Host Bus Adapter H22x. The following message would be reported in the component log file - &ldquo;Device appears more than once in tree&rdquo;. The drive firmware installation failure was not observed in configurations having only one external drive enclosure attached to an HP Host Bus Adapter H22x.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="ja">
        <revision_fixes_xlate_part>
<![CDATA[<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>HP ProLiant servers would power down due a hard drive overtemp condition that was falsely reported. Hard disk drive firmware HPD8 resolves this issue.</li>
</ul>

<p><strong>Problems Fixed for HPD8 (C):</strong></p>

<ul>
	<li>Component would fail to install drive firmware for drives present in a system configured with two or more external drive enclosures attached to an HP Host Bus Adapter H22x. The following message would be reported in the component log file - &ldquo;Device appears more than once in tree&rdquo;. The drive firmware installation failure was not observed in configurations having only one external drive enclosure attached to an HP Host Bus Adapter H22x.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
    </revision>
    <revision>
      <version value="HPD8" revision="B" type_of_change="1"/>
      <revision_enhancements_xlate lang="en">
        <revision_enhancements_xlate_part>
<![CDATA[<p><strong>Enhancements/New Features for HPD8 (B):</strong></p>

<ul>
	<li>VMware Firmware Smart component packaging has changed from a *.scexe package to a *.zip package, which contains an executable binary that provides enhanced security during installation. The functionality of the VMware Smart Component has not changed.</li>
</ul>
]]>
</revision_enhancements_xlate_part>
      </revision_enhancements_xlate>
      <revision_enhancements_xlate lang="de">
        <revision_enhancements_xlate_part>
<![CDATA[<p><strong>Enhancements/New Features for HPD8 (B):</strong></p>

<ul>
	<li>VMware Firmware Smart component packaging has changed from a *.scexe package to a *.zip package, which contains an executable binary that provides enhanced security during installation. The functionality of the VMware Smart Component has not changed.</li>
</ul>
]]>
</revision_enhancements_xlate_part>
      </revision_enhancements_xlate>
      <revision_enhancements_xlate lang="es">
        <revision_enhancements_xlate_part>
<![CDATA[<p><strong>Enhancements/New Features for HPD8 (B):</strong></p>

<ul>
	<li>VMware Firmware Smart component packaging has changed from a *.scexe package to a *.zip package, which contains an executable binary that provides enhanced security during installation. The functionality of the VMware Smart Component has not changed.</li>
</ul>
]]>
</revision_enhancements_xlate_part>
      </revision_enhancements_xlate>
      <revision_enhancements_xlate lang="fr">
        <revision_enhancements_xlate_part>
<![CDATA[<p><strong>Enhancements/New Features for HPD8 (B):</strong></p>

<ul>
	<li>VMware Firmware Smart component packaging has changed from a *.scexe package to a *.zip package, which contains an executable binary that provides enhanced security during installation. The functionality of the VMware Smart Component has not changed.</li>
</ul>
]]>
</revision_enhancements_xlate_part>
      </revision_enhancements_xlate>
      <revision_enhancements_xlate lang="it">
        <revision_enhancements_xlate_part>
<![CDATA[<p><strong>Enhancements/New Features for HPD8 (B):</strong></p>

<ul>
	<li>VMware Firmware Smart component packaging has changed from a *.scexe package to a *.zip package, which contains an executable binary that provides enhanced security during installation. The functionality of the VMware Smart Component has not changed.</li>
</ul>
]]>
</revision_enhancements_xlate_part>
      </revision_enhancements_xlate>
      <revision_enhancements_xlate lang="ja">
        <revision_enhancements_xlate_part>
<![CDATA[<p><strong>HPD8 (B)の改善点/新しい機能：</strong></p>

<ul>
	<li>VMware Firmware Smartコンポーネントパッケージは、*.scexeパッケージからインストール中のセキュリティの強化を提供する実行可能なバイナリを含む、*.zipパッケージに変更されました。 VMware Smartコンポーネントの機能は変更されていません。</li>
</ul>
]]>
</revision_enhancements_xlate_part>
      </revision_enhancements_xlate>
      <revision_fixes_xlate lang="en">
        <revision_fixes_xlate_part>
<![CDATA[<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>HP ProLiant servers would power down due a hard drive overtemp condition that was falsely reported. Hard disk drive firmware HPD8 resolves this issue.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="de">
        <revision_fixes_xlate_part>
<![CDATA[<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>HP ProLiant servers would power down due a hard drive overtemp condition that was falsely reported. Hard disk drive firmware HPD8 resolves this issue.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="es">
        <revision_fixes_xlate_part>
<![CDATA[<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>HP ProLiant servers would power down due a hard drive overtemp condition that was falsely reported. Hard disk drive firmware HPD8 resolves this issue.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="fr">
        <revision_fixes_xlate_part>
<![CDATA[<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>HP ProLiant servers would power down due a hard drive overtemp condition that was falsely reported. Hard disk drive firmware HPD8 resolves this issue.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="it">
        <revision_fixes_xlate_part>
<![CDATA[<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>HP ProLiant servers would power down due a hard drive overtemp condition that was falsely reported. Hard disk drive firmware HPD8 resolves this issue.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="ja">
        <revision_fixes_xlate_part>
<![CDATA[<p><strong>修正された問題点：</strong></p>

<ul>
	<li>HP ProLiantサーバーが誤ってレポートされたハードディスクドライブ温度超過状態により電源ダウンしました。 ハードディスクドライブのファームウェアHPD8は、この問題を解決します。</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
    </revision>
    <revision>
      <version value="HPD7" revision="D" type_of_change="2"/>
      <revision_enhancements_xlate lang="en">
        <revision_enhancements_xlate_part>
<![CDATA[<strong>Enhancements/New Features:</strong>
<ul>
	<li>
		Added support for VMware vSphere 5.5.</li>
	<li>
		Added support for UEFI (Universal Extensible Firmware Interface) based servers.</li>
</ul>
<strong>Enhancements/New Features for HPD7 (D):&nbsp;</strong>
<ul>
	<li>
		Updated the flash engine to standardize logging across all SAS drive components.</li>
	<li>
		Enhanced logging capability to improve the details provided in the component log file.</li>
</ul>
]]>
</revision_enhancements_xlate_part>
      </revision_enhancements_xlate>
      <revision_enhancements_xlate lang="de">
        <revision_enhancements_xlate_part>
<![CDATA[<strong>Enhancements/New Features:</strong>
<ul>
	<li>
		Added support for VMware vSphere 5.5.</li>
	<li>
		Added support for UEFI (Universal Extensible Firmware Interface) based servers.</li>
</ul>
<strong>Enhancements/New Features for HPD7 (D):&nbsp;</strong>
<ul>
	<li>
		Updated the flash engine to standardize logging across all SAS drive components.</li>
	<li>
		Enhanced logging capability to improve the details provided in the component log file.</li>
</ul>
]]>
</revision_enhancements_xlate_part>
      </revision_enhancements_xlate>
      <revision_enhancements_xlate lang="es">
        <revision_enhancements_xlate_part>
<![CDATA[<strong>Enhancements/New Features:</strong>
<ul>
	<li>
		Added support for VMware vSphere 5.5.</li>
	<li>
		Added support for UEFI (Universal Extensible Firmware Interface) based servers.</li>
</ul>
<strong>Enhancements/New Features for HPD7 (D):&nbsp;</strong>
<ul>
	<li>
		Updated the flash engine to standardize logging across all SAS drive components.</li>
	<li>
		Enhanced logging capability to improve the details provided in the component log file.</li>
</ul>
]]>
</revision_enhancements_xlate_part>
      </revision_enhancements_xlate>
      <revision_enhancements_xlate lang="fr">
        <revision_enhancements_xlate_part>
<![CDATA[<strong>Enhancements/New Features:</strong>
<ul>
	<li>
		Added support for VMware vSphere 5.5.</li>
	<li>
		Added support for UEFI (Universal Extensible Firmware Interface) based servers.</li>
</ul>
<strong>Enhancements/New Features for HPD7 (D):&nbsp;</strong>
<ul>
	<li>
		Updated the flash engine to standardize logging across all SAS drive components.</li>
	<li>
		Enhanced logging capability to improve the details provided in the component log file.</li>
</ul>
]]>
</revision_enhancements_xlate_part>
      </revision_enhancements_xlate>
      <revision_enhancements_xlate lang="it">
        <revision_enhancements_xlate_part>
<![CDATA[<strong>Enhancements/New Features:</strong>
<ul>
	<li>
		Added support for VMware vSphere 5.5.</li>
	<li>
		Added support for UEFI (Universal Extensible Firmware Interface) based servers.</li>
</ul>
<strong>Enhancements/New Features for HPD7 (D):&nbsp;</strong>
<ul>
	<li>
		Updated the flash engine to standardize logging across all SAS drive components.</li>
	<li>
		Enhanced logging capability to improve the details provided in the component log file.</li>
</ul>
]]>
</revision_enhancements_xlate_part>
      </revision_enhancements_xlate>
      <revision_enhancements_xlate lang="ja">
        <revision_enhancements_xlate_part>
<![CDATA[<strong>改善点/新しい機能：</strong>
<ul>
	<li>
		VMware vSphere 5.5のサポートを追加しました。</li>
	<li>
		UEFI（Universal Extensible Firmware Interface）ベースのサーバーのサポートを追加しました。</li>
</ul>
<strong>HPD7 (D)の改善点/新しい機能： </strong>
<ul>
	<li>
		すべてのSASドライブコンポーネント全体でログを標準化するようにフラッシュエンジンを更新しました。</li>
	<li>
		コンポーネントログファイルで提供される詳細を改善するためにログ機能を拡張しました。</li>
</ul>
]]>
</revision_enhancements_xlate_part>
      </revision_enhancements_xlate>
      <revision_fixes_xlate lang="en">
        <revision_fixes_xlate_part>
<![CDATA[<strong>Problems Fixed: </strong>
<ul>
 <li>
  This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive.&nbsp; The WRITE SAME command may be used during RAID ARRAY parity initialization.</li>
 <li>
  After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPD7 prevents this condition from occurring.</li>
 <li>
  During a replacement drive rebuild process, a RAID Controller may create false errors. These false errors were improperly counted as true errors by the drive and resulted in a &ldquo;SMART Imminent Failure&rdquo; or &ldquo;Predictive Failure&rdquo; message. Firmware version HPD7 prevents the drive from counting these false errors and eliminates the unwarranted SMART &quot;Imminent Failure&rdquo; or &ldquo;Predictive Failure&rdquo; message.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="de">
        <revision_fixes_xlate_part>
<![CDATA[<strong>Problems Fixed: </strong>
<ul>
 <li>
  This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive.&nbsp; The WRITE SAME command may be used during RAID ARRAY parity initialization.</li>
 <li>
  After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPD7 prevents this condition from occurring.</li>
 <li>
  During a replacement drive rebuild process, a RAID Controller may create false errors. These false errors were improperly counted as true errors by the drive and resulted in a &ldquo;SMART Imminent Failure&rdquo; or &ldquo;Predictive Failure&rdquo; message. Firmware version HPD7 prevents the drive from counting these false errors and eliminates the unwarranted SMART &quot;Imminent Failure&rdquo; or &ldquo;Predictive Failure&rdquo; message.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="es">
        <revision_fixes_xlate_part>
<![CDATA[<strong>Problems Fixed: </strong>
<ul>
 <li>
  This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive.&nbsp; The WRITE SAME command may be used during RAID ARRAY parity initialization.</li>
 <li>
  After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPD7 prevents this condition from occurring.</li>
 <li>
  During a replacement drive rebuild process, a RAID Controller may create false errors. These false errors were improperly counted as true errors by the drive and resulted in a &ldquo;SMART Imminent Failure&rdquo; or &ldquo;Predictive Failure&rdquo; message. Firmware version HPD7 prevents the drive from counting these false errors and eliminates the unwarranted SMART &quot;Imminent Failure&rdquo; or &ldquo;Predictive Failure&rdquo; message.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="fr">
        <revision_fixes_xlate_part>
<![CDATA[<strong>Problems Fixed: </strong>
<ul>
 <li>
  This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive.&nbsp; The WRITE SAME command may be used during RAID ARRAY parity initialization.</li>
 <li>
  After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPD7 prevents this condition from occurring.</li>
 <li>
  During a replacement drive rebuild process, a RAID Controller may create false errors. These false errors were improperly counted as true errors by the drive and resulted in a &ldquo;SMART Imminent Failure&rdquo; or &ldquo;Predictive Failure&rdquo; message. Firmware version HPD7 prevents the drive from counting these false errors and eliminates the unwarranted SMART &quot;Imminent Failure&rdquo; or &ldquo;Predictive Failure&rdquo; message.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="it">
        <revision_fixes_xlate_part>
<![CDATA[<strong>Problems Fixed: </strong>
<ul>
 <li>
  This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive.&nbsp; The WRITE SAME command may be used during RAID ARRAY parity initialization.</li>
 <li>
  After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPD7 prevents this condition from occurring.</li>
 <li>
  During a replacement drive rebuild process, a RAID Controller may create false errors. These false errors were improperly counted as true errors by the drive and resulted in a &ldquo;SMART Imminent Failure&rdquo; or &ldquo;Predictive Failure&rdquo; message. Firmware version HPD7 prevents the drive from counting these false errors and eliminates the unwarranted SMART &quot;Imminent Failure&rdquo; or &ldquo;Predictive Failure&rdquo; message.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="ja">
        <revision_fixes_xlate_part>
<![CDATA[<strong>修正された問題点： </strong>
<ul>
 <li>
  このファームウェアは、ハードディスクに不正なデータが書き込まれることがある、WRITE SAMEコマンドシーケンス中に起こるまれな状態を防ぎます。 WRITE SAMEコマンドは、RAID ARRAYパリティの初期化中に使われることがあります。</li>
 <li>
  HDDの長期使用後に電源の再投入後、ごくまれにデータを含むディスクの領域にドライブのヘッドが接触して、データの損失や機械的損傷を引き起こすことがあります。 ファームウェア バージョンHPD7は、この状態を防ぐことができます。</li>
 <li>
  置き換えたドライブの再ビルドプロセス中、RAIDコントローラーは、誤ったエラーを作成することがあります。 これらの誤ったエラーは、ドライブにより真のエラーとして不適切にカウントされたもので、"SMART Imminent Failure"あるいは"Predictive Failure"のメッセージを引き起こします。 ファームウェアバージョンHPD7は、ドライブを誤ったエラーのカウントから防ぎ、不当なSMARTの "Imminent Failure"あるいは"Predictive Failure"メッセージを回避します。</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
    </revision>
    <revision>
      <version value="HPD7" revision="C" type_of_change="2"/>
      <revision_enhancements_xlate lang="en">
        <revision_enhancements_xlate_part>
<![CDATA[<strong>Enhancements/New Features:</strong>
<ul>
 <li>
  Added support for VMware vSphere 5.5.</li>
 <li>
  Added support for UEFI (Universal Extensible Firmware Interface) based servers.</li>
</ul>
]]>
</revision_enhancements_xlate_part>
      </revision_enhancements_xlate>
      <revision_enhancements_xlate lang="de">
        <revision_enhancements_xlate_part>
<![CDATA[<strong>Enhancements/New Features:</strong>
<ul>
 <li>
  Added support for VMware vSphere 5.5.</li>
 <li>
  Added support for UEFI (Universal Extensible Firmware Interface) based servers.</li>
</ul>
]]>
</revision_enhancements_xlate_part>
      </revision_enhancements_xlate>
      <revision_enhancements_xlate lang="es">
        <revision_enhancements_xlate_part>
<![CDATA[<strong>Enhancements/New Features:</strong>
<ul>
 <li>
  Added support for VMware vSphere 5.5.</li>
 <li>
  Added support for UEFI (Universal Extensible Firmware Interface) based servers.</li>
</ul>
]]>
</revision_enhancements_xlate_part>
      </revision_enhancements_xlate>
      <revision_enhancements_xlate lang="fr">
        <revision_enhancements_xlate_part>
<![CDATA[<strong>Enhancements/New Features:</strong>
<ul>
 <li>
  Added support for VMware vSphere 5.5.</li>
 <li>
  Added support for UEFI (Universal Extensible Firmware Interface) based servers.</li>
</ul>
]]>
</revision_enhancements_xlate_part>
      </revision_enhancements_xlate>
      <revision_enhancements_xlate lang="it">
        <revision_enhancements_xlate_part>
<![CDATA[<strong>Enhancements/New Features:</strong>
<ul>
 <li>
  Added support for VMware vSphere 5.5.</li>
 <li>
  Added support for UEFI (Universal Extensible Firmware Interface) based servers.</li>
</ul>
]]>
</revision_enhancements_xlate_part>
      </revision_enhancements_xlate>
      <revision_enhancements_xlate lang="ja">
        <revision_enhancements_xlate_part>
<![CDATA[<strong>改善点/新しい機能：</strong>
<ul>
 <li>
  VMware vSphere 5.5のサポートを追加しました。</li>
 <li>
  UEFI（Universal Extensible Firmware Interface）ベースのサーバーのサポートを追加しました。</li>
</ul>
]]>
</revision_enhancements_xlate_part>
      </revision_enhancements_xlate>
      <revision_fixes_xlate lang="en">
        <revision_fixes_xlate_part>
<![CDATA[<strong>Problems Fixed: </strong>
<ul>
 <li>
  This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive.&nbsp; The WRITE SAME command may be used during RAID ARRAY parity initialization.</li>
 <li>
  After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPD7 prevents this condition from occurring.</li>
 <li>
  During a replacement drive rebuild process, a RAID Controller may create false errors. These false errors were improperly counted as true errors by the drive and resulted in a &ldquo;SMART Imminent Failure&rdquo; or &ldquo;Predictive Failure&rdquo; message. Firmware version HPD7 prevents the drive from counting these false errors and eliminates the unwarranted SMART &quot;Imminent Failure&rdquo; or &ldquo;Predictive Failure&rdquo; message.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="de">
        <revision_fixes_xlate_part>
<![CDATA[<strong>Problems Fixed: </strong>
<ul>
 <li>
  This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive.&nbsp; The WRITE SAME command may be used during RAID ARRAY parity initialization.</li>
 <li>
  After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPD7 prevents this condition from occurring.</li>
 <li>
  During a replacement drive rebuild process, a RAID Controller may create false errors. These false errors were improperly counted as true errors by the drive and resulted in a &ldquo;SMART Imminent Failure&rdquo; or &ldquo;Predictive Failure&rdquo; message. Firmware version HPD7 prevents the drive from counting these false errors and eliminates the unwarranted SMART &quot;Imminent Failure&rdquo; or &ldquo;Predictive Failure&rdquo; message.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="es">
        <revision_fixes_xlate_part>
<![CDATA[<strong>Problems Fixed: </strong>
<ul>
 <li>
  This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive.&nbsp; The WRITE SAME command may be used during RAID ARRAY parity initialization.</li>
 <li>
  After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPD7 prevents this condition from occurring.</li>
 <li>
  During a replacement drive rebuild process, a RAID Controller may create false errors. These false errors were improperly counted as true errors by the drive and resulted in a &ldquo;SMART Imminent Failure&rdquo; or &ldquo;Predictive Failure&rdquo; message. Firmware version HPD7 prevents the drive from counting these false errors and eliminates the unwarranted SMART &quot;Imminent Failure&rdquo; or &ldquo;Predictive Failure&rdquo; message.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="fr">
        <revision_fixes_xlate_part>
<![CDATA[<strong>Problems Fixed: </strong>
<ul>
 <li>
  This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive.&nbsp; The WRITE SAME command may be used during RAID ARRAY parity initialization.</li>
 <li>
  After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPD7 prevents this condition from occurring.</li>
 <li>
  During a replacement drive rebuild process, a RAID Controller may create false errors. These false errors were improperly counted as true errors by the drive and resulted in a &ldquo;SMART Imminent Failure&rdquo; or &ldquo;Predictive Failure&rdquo; message. Firmware version HPD7 prevents the drive from counting these false errors and eliminates the unwarranted SMART &quot;Imminent Failure&rdquo; or &ldquo;Predictive Failure&rdquo; message.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="it">
        <revision_fixes_xlate_part>
<![CDATA[<strong>Problems Fixed: </strong>
<ul>
 <li>
  This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive.&nbsp; The WRITE SAME command may be used during RAID ARRAY parity initialization.</li>
 <li>
  After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPD7 prevents this condition from occurring.</li>
 <li>
  During a replacement drive rebuild process, a RAID Controller may create false errors. These false errors were improperly counted as true errors by the drive and resulted in a &ldquo;SMART Imminent Failure&rdquo; or &ldquo;Predictive Failure&rdquo; message. Firmware version HPD7 prevents the drive from counting these false errors and eliminates the unwarranted SMART &quot;Imminent Failure&rdquo; or &ldquo;Predictive Failure&rdquo; message.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="ja">
        <revision_fixes_xlate_part>
<![CDATA[<strong>修正された問題点： </strong>
<ul>
 <li>
  このファームウェアは、ハードディスクに不正なデータが書き込まれることがある、WRITE SAMEコマンドシーケンス中に起こるまれな状態を防ぎます。 WRITE SAMEコマンドは、RAID ARRAYパリティの初期化中に使われることがあります。</li>
 <li>
  HDDの長期使用後に電源の再投入後、ごくまれにデータを含むディスクの領域にドライブのヘッドが接触して、データの損失や機械的損傷を引き起こすことがあります。 ファームウェア バージョンHPD7は、この状態を防ぐことができます。</li>
 <li>
  置き換えたドライブの再ビルドプロセス中、RAIDコントローラーは、誤ったエラーを作成することがあります。 これらの誤ったエラーは、ドライブにより真のエラーとして不適切にカウントされたもので、"SMART Imminent Failure"あるいは"Predictive Failure"のメッセージを引き起こします。 ファームウェアバージョンHPD7は、ドライブを誤ったエラーのカウントから防ぎ、不当なSMARTの "Imminent Failure"あるいは"Predictive Failure"メッセージを回避します。</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
    </revision>
    <revision>
      <version value="HPD7" revision="" type_of_change="2"/>
      <revision_fixes_xlate lang="en">
        <revision_fixes_xlate_part>
<![CDATA[<strong>Problems Fixed: </strong>
<ul>
 <li>
  This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive.&nbsp; The WRITE SAME command may be used during RAID ARRAY parity initialization.</li>
 <li>
  After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPD7 prevents this condition from occurring.</li>
 <li>
  During a replacement drive rebuild process, a RAID Controller may create false errors. These false errors were improperly counted as true errors by the drive and resulted in a &ldquo;SMART Imminent Failure&rdquo; or &ldquo;Predictive Failure&rdquo; message. Firmware version HPD7 prevents the drive from counting these false errors and eliminates the unwarranted SMART &quot;Imminent Failure&rdquo; or &ldquo;Predictive Failure&rdquo; message.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="de">
        <revision_fixes_xlate_part>
<![CDATA[<strong>Problems Fixed: </strong>
<ul>
 <li>
  This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive.&nbsp; The WRITE SAME command may be used during RAID ARRAY parity initialization.</li>
 <li>
  After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPD7 prevents this condition from occurring.</li>
 <li>
  During a replacement drive rebuild process, a RAID Controller may create false errors. These false errors were improperly counted as true errors by the drive and resulted in a &ldquo;SMART Imminent Failure&rdquo; or &ldquo;Predictive Failure&rdquo; message. Firmware version HPD7 prevents the drive from counting these false errors and eliminates the unwarranted SMART &quot;Imminent Failure&rdquo; or &ldquo;Predictive Failure&rdquo; message.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="es">
        <revision_fixes_xlate_part>
<![CDATA[<strong>Problems Fixed: </strong>
<ul>
 <li>
  This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive.&nbsp; The WRITE SAME command may be used during RAID ARRAY parity initialization.</li>
 <li>
  After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPD7 prevents this condition from occurring.</li>
 <li>
  During a replacement drive rebuild process, a RAID Controller may create false errors. These false errors were improperly counted as true errors by the drive and resulted in a &ldquo;SMART Imminent Failure&rdquo; or &ldquo;Predictive Failure&rdquo; message. Firmware version HPD7 prevents the drive from counting these false errors and eliminates the unwarranted SMART &quot;Imminent Failure&rdquo; or &ldquo;Predictive Failure&rdquo; message.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="fr">
        <revision_fixes_xlate_part>
<![CDATA[<strong>Problems Fixed: </strong>
<ul>
 <li>
  This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive.&nbsp; The WRITE SAME command may be used during RAID ARRAY parity initialization.</li>
 <li>
  After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPD7 prevents this condition from occurring.</li>
 <li>
  During a replacement drive rebuild process, a RAID Controller may create false errors. These false errors were improperly counted as true errors by the drive and resulted in a &ldquo;SMART Imminent Failure&rdquo; or &ldquo;Predictive Failure&rdquo; message. Firmware version HPD7 prevents the drive from counting these false errors and eliminates the unwarranted SMART &quot;Imminent Failure&rdquo; or &ldquo;Predictive Failure&rdquo; message.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="it">
        <revision_fixes_xlate_part>
<![CDATA[<strong>Problems Fixed: </strong>
<ul>
 <li>
  This firmware prevents a rare condition that may occur during a WRITE SAME command sequence that may result in incorrect data being written to the hard drive.&nbsp; The WRITE SAME command may be used during RAID ARRAY parity initialization.</li>
 <li>
  After long term use of the HDD, a rare condition might occur following a power cycle where the drive heads may land on areas of the disk containing data, which could potentially cause data loss or mechanical damage. Firmware version HPD7 prevents this condition from occurring.</li>
 <li>
  During a replacement drive rebuild process, a RAID Controller may create false errors. These false errors were improperly counted as true errors by the drive and resulted in a &ldquo;SMART Imminent Failure&rdquo; or &ldquo;Predictive Failure&rdquo; message. Firmware version HPD7 prevents the drive from counting these false errors and eliminates the unwarranted SMART &quot;Imminent Failure&rdquo; or &ldquo;Predictive Failure&rdquo; message.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="ja">
        <revision_fixes_xlate_part>
<![CDATA[<strong>修正された問題点： </strong>
<ul>
 <li>
  このファームウェアは、ハードディスクに不正なデータが書き込まれることがある、WRITE SAMEコマンドシーケンス中に起こるまれな状態を防ぎます。 WRITE SAMEコマンドは、RAID ARRAYパリティの初期化中に使われることがあります。</li>
 <li>
  HDDの長期使用後に電源の再投入後、ごくまれにデータを含むディスクの領域にドライブのヘッドが接触して、データの損失や機械的損傷を引き起こすことがあります。 ファームウェア バージョンHPD7は、この状態を防ぐことができます。</li>
 <li>
  置き換えたドライブの再ビルドプロセス中、RAIDコントローラーは、誤ったエラーを作成することがあります。 これらの誤ったエラーは、ドライブにより真のエラーとして不適切にカウントされたもので、"SMART Imminent Failure"あるいは"Predictive Failure"のメッセージを引き起こします。 ファームウェアバージョンHPD7は、ドライブを誤ったエラーのカウントから防ぎ、不当なSMARTの "Imminent Failure"あるいは"Predictive Failure"メッセージを回避します。</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
    </revision>
  </revision_history>
  <sw_keys>
    <sw_keys_and>
      <sw_key name="EG0300FBLSE">
        <sw_key_expectedpath>firmware:sd:SAS</sw_key_expectedpath>
      </sw_key>
    </sw_keys_and>
    <sw_keys_and>
      <sw_key name="EG0450FBLSF">
        <sw_key_expectedpath>firmware:sd:SAS</sw_key_expectedpath>
      </sw_key>
    </sw_keys_and>
    <sw_keys_and>
      <sw_key name="EG0600FBLSH">
        <sw_key_expectedpath>firmware:sd:SAS</sw_key_expectedpath>
      </sw_key>
    </sw_keys_and>
    <sw_keys_and>
      <sw_key name="EG0900FBLSK">
        <sw_key_expectedpath>firmware:sd:SAS</sw_key_expectedpath>
      </sw_key>
    </sw_keys_and>
  </sw_keys>
  <prerequisites>
    <supported_operating_systems>
      <supported_operating_system platform="vmware_esx_server" major="5" minor="5" sr="OEM" name="VMware vSphere 5.5"/>
      <supported_operating_system platform="vmware_esx_server" major="5" minor="0" sr="OEM" name="VMware ESXi 5.0"/>
      <supported_operating_system platform="vmware_esx_server" major="6" minor="0" sr="OEM" name="VMware vSphere 6.0"/>
      <supported_operating_system platform="vmware_esx_server" major="5" minor="1" sr="OEM" name="VMware vSphere 5.1"/>
    </supported_operating_systems>
    <supported_devices>
      <supported_devices_and>
        <supported_device type="sas">
          <supported_device_data name="id">EG0900FBLSK</supported_device_data>
        </supported_device>
      </supported_devices_and>
      <supported_devices_and>
        <supported_device type="sas">
          <supported_device_data name="id">EG0600FBLSH</supported_device_data>
        </supported_device>
      </supported_devices_and>
      <supported_devices_and>
        <supported_device type="sas">
          <supported_device_data name="id">EG0450FBLSF</supported_device_data>
        </supported_device>
      </supported_devices_and>
      <supported_devices_and>
        <supported_device type="sas">
          <supported_device_data name="id">EG0300FBLSE</supported_device_data>
        </supported_device>
      </supported_devices_and>
    </supported_devices>
    <required_diskspace size_kb="6000"/>
  </prerequisites>
  <installation>
    <install>
      <install_caps silent="yes" needuseracct="no"/>
      <command>CP029335.scexe</command>
      <command_params></command_params>
      <reboot_required value="no"/>
      <reboot_details value="Environment Dependent">
        <reboot_details_xlate lang="en">Reboot may be required after installation for updates to take effect and hardware stability to be maintained.</reboot_details_xlate>
        <reboot_details_xlate lang="ja">アップデートの効果とハードウェアの安定を得るために、インストール後再起動が必要になることがあります。</reboot_details_xlate>
      </reboot_details>
      <per_device_install_time_seconds>0</per_device_install_time_seconds>
    </install>
    <uninstall>
      <uninstall_caps silent="no"/>
      <command></command>
      <command_params></command_params>
      <reboot_required value="no"/>
    </uninstall>
  </installation>
</cpq_package>
