Server 服务器 サーバ 서버 伺服器 SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Application - System Management 应用程序 - 系统管理 アプリケーション - システム マネジメント 응용 프로그램 - 시스템 관리 應用程式 - 系統管理 SUSE LINUX Enterprise Server 11 SP3 Supplement for HP Service Pack for ProLiant SUSE LINUX Enterprise Server 11 SP3 Supplement for HP Service Pack for ProLiant SUSE LINUX Enterprise Server 11 SP3 Supplement for HP Service Pack for ProLiant SUSE LINUX Enterprise Server 11 SP3 Supplement for HP Service Pack for ProLiant SUSE LINUX Enterprise Server 11 SP3 Supplement for HP Service Pack for ProLiant English (US), Japanese 英語（US）, 日本語 영어(미국), 일본어 英语（美国）, 日语 美式英文, 日文 IMPORTANT: Before deploying software updates on a target system, be sure that a recent backup of the target system is available in the event the deployment procedure fails.

Supplement installation for Linux servers has the following minimum requirements:

  • glibc 2.2.4-26 or later
  • gawk 3.1.0-3 or later
  • sed 3.02-10 or later
  • pciutils-2.1.8-25.i386.rpm or later

The following RPMs are also required:

    On Red Hat servers:
  • rpm 4.0.4 or later
  • rpm-build 4.0.4 or later
  • rpm-devel 4.0.4 or later
    On SUSE Linux servers:
  • rpm 3.0.6 or later

To successfully deploy HP SUM on remote target systems based on a Linux operating system, the following must be available:

  • tcl-8.x package
  • expect-5.x package

In addition, components that are compiled from source code (such as NIC drivers) require the presence of the following build tools:

  • gcc-2.96-108.1 or later
  • cpp-2.96-108.1 or later
  • binutils-2.11.90.0.8 or later
  • glibc-devel-2.2.4-26 or later
  • kernel-headers- (The version number depends on which kernel is used.)

Installing these updates requires legacy compatibility libraries be loaded. The autorun script will detect missing libraries and prompt for their installation. For example, under SLES 11 32 or 64 bit, you must install the compatibility RPM package.

The command interpreter (shell) /bin/bash must be installed.

For autorun capabilties, the system must be running X with a window manager and an installed browser. For some distributions, the CD must be mounted and the ./autorun command executed for autorun to function.

Note: Please ensure the following RPMs are also installed.

    For Red Hat Enterprise Linux 5 AMD64/EM64T servers:
  • compat-libstdc++-296-2.96-132.7.2.i386 or later
  • lm_sensors-2.8.7-2.x86_64 or later
  • net-snmp-5.3.1-14.el5.x86_64 or later
  • perl (needed to provide the libperl.so)
  • libnl (needed for QLogic and Emulex drivers)

The following RPMs needed only on the local Linux system running HP SUM to perform builds of NIC source RPMs)

  • gcc-2.96-108.1 or later
  • kernel-devel (needed to build RPMs from source. Especially for Red Hat Enterprise Server 5.3 and later, please be sure to install the kernel-devel in addition to any kernel specific devel package such as kernel-xen-devel or kernel-PAE-devel)
  • RPM build tools
]]> IMPORTANT: Before deploying software updates on a target system, be sure that a recent backup of the target system is available in the event the deployment procedure fails.

Supplement installation for Linux servers has the following minimum requirements:

  • glibc 2.2.4-26 or later
  • gawk 3.1.0-3 or later
  • sed 3.02-10 or later
  • pciutils-2.1.8-25.i386.rpm or later

The following RPMs are also required:

    On Red Hat servers:
  • rpm 4.0.4 or later
  • rpm-build 4.0.4 or later
  • rpm-devel 4.0.4 or later
    On SUSE Linux servers:
  • rpm 3.0.6 or later

To successfully deploy HP SUM on remote target systems based on a Linux operating system, the following must be available:

  • tcl-8.x package
  • expect-5.x package

In addition, components that are compiled from source code (such as NIC drivers) require the presence of the following build tools:

  • gcc-2.96-108.1 or later
  • cpp-2.96-108.1 or later
  • binutils-2.11.90.0.8 or later
  • glibc-devel-2.2.4-26 or later
  • kernel-headers- (The version number depends on which kernel is used.)

Installing these updates requires legacy compatibility libraries be loaded. The autorun script will detect missing libraries and prompt for their installation. For example, under SLES 11 32 or 64 bit, you must install the compatibility RPM package.

The command interpreter (shell) /bin/bash must be installed.

For autorun capabilties, the system must be running X with a window manager and an installed browser. For some distributions, the CD must be mounted and the ./autorun command executed for autorun to function.

Note: Please ensure the following RPMs are also installed.

    For Red Hat Enterprise Linux 5 AMD64/EM64T servers:
  • compat-libstdc++-296-2.96-132.7.2.i386 or later
  • lm_sensors-2.8.7-2.x86_64 or later
  • net-snmp-5.3.1-14.el5.x86_64 or later
  • perl (needed to provide the libperl.so)
  • libnl (needed for QLogic and Emulex drivers)

The following RPMs needed only on the local Linux system running HP SUM to perform builds of NIC source RPMs)

  • gcc-2.96-108.1 or later
  • kernel-devel (needed to build RPMs from source. Especially for Red Hat Enterprise Server 5.3 and later, please be sure to install the kernel-devel in addition to any kernel specific devel package such as kernel-xen-devel or kernel-PAE-devel)
  • RPM build tools
]]> IMPORTANT: Before deploying software updates on a target system, be sure that a recent backup of the target system is available in the event the deployment procedure fails.

Supplement installation for Linux servers has the following minimum requirements:

  • glibc 2.2.4-26 or later
  • gawk 3.1.0-3 or later
  • sed 3.02-10 or later
  • pciutils-2.1.8-25.i386.rpm or later

The following RPMs are also required:

    On Red Hat servers:
  • rpm 4.0.4 or later
  • rpm-build 4.0.4 or later
  • rpm-devel 4.0.4 or later
    On SUSE Linux servers:
  • rpm 3.0.6 or later

To successfully deploy HP SUM on remote target systems based on a Linux operating system, the following must be available:

  • tcl-8.x package
  • expect-5.x package

In addition, components that are compiled from source code (such as NIC drivers) require the presence of the following build tools:

  • gcc-2.96-108.1 or later
  • cpp-2.96-108.1 or later
  • binutils-2.11.90.0.8 or later
  • glibc-devel-2.2.4-26 or later
  • kernel-headers- (The version number depends on which kernel is used.)

Installing these updates requires legacy compatibility libraries be loaded. The autorun script will detect missing libraries and prompt for their installation. For example, under SLES 11 32 or 64 bit, you must install the compatibility RPM package.

The command interpreter (shell) /bin/bash must be installed.

For autorun capabilties, the system must be running X with a window manager and an installed browser. For some distributions, the CD must be mounted and the ./autorun command executed for autorun to function.

Note: Please ensure the following RPMs are also installed.

    For Red Hat Enterprise Linux 5 AMD64/EM64T servers:
  • compat-libstdc++-296-2.96-132.7.2.i386 or later
  • lm_sensors-2.8.7-2.x86_64 or later
  • net-snmp-5.3.1-14.el5.x86_64 or later
  • perl (needed to provide the libperl.so)
  • libnl (needed for QLogic and Emulex drivers)

The following RPMs needed only on the local Linux system running HP SUM to perform builds of NIC source RPMs)

  • gcc-2.96-108.1 or later
  • kernel-devel (needed to build RPMs from source. Especially for Red Hat Enterprise Server 5.3 and later, please be sure to install the kernel-devel in addition to any kernel specific devel package such as kernel-xen-devel or kernel-PAE-devel)
  • RPM build tools
]]> IMPORTANT: Before deploying software updates on a target system, be sure that a recent backup of the target system is available in the event the deployment procedure fails.

Supplement installation for Linux servers has the following minimum requirements:

  • glibc 2.2.4-26 or later
  • gawk 3.1.0-3 or later
  • sed 3.02-10 or later
  • pciutils-2.1.8-25.i386.rpm or later

The following RPMs are also required:

    On Red Hat servers:
  • rpm 4.0.4 or later
  • rpm-build 4.0.4 or later
  • rpm-devel 4.0.4 or later
    On SUSE Linux servers:
  • rpm 3.0.6 or later

To successfully deploy HP SUM on remote target systems based on a Linux operating system, the following must be available:

  • tcl-8.x package
  • expect-5.x package

In addition, components that are compiled from source code (such as NIC drivers) require the presence of the following build tools:

  • gcc-2.96-108.1 or later
  • cpp-2.96-108.1 or later
  • binutils-2.11.90.0.8 or later
  • glibc-devel-2.2.4-26 or later
  • kernel-headers- (The version number depends on which kernel is used.)

Installing these updates requires legacy compatibility libraries be loaded. The autorun script will detect missing libraries and prompt for their installation. For example, under SLES 11 32 or 64 bit, you must install the compatibility RPM package.

The command interpreter (shell) /bin/bash must be installed.

For autorun capabilties, the system must be running X with a window manager and an installed browser. For some distributions, the CD must be mounted and the ./autorun command executed for autorun to function.

Note: Please ensure the following RPMs are also installed.

    For Red Hat Enterprise Linux 5 AMD64/EM64T servers:
  • compat-libstdc++-296-2.96-132.7.2.i386 or later
  • lm_sensors-2.8.7-2.x86_64 or later
  • net-snmp-5.3.1-14.el5.x86_64 or later
  • perl (needed to provide the libperl.so)
  • libnl (needed for QLogic and Emulex drivers)

The following RPMs needed only on the local Linux system running HP SUM to perform builds of NIC source RPMs)

  • gcc-2.96-108.1 or later
  • kernel-devel (needed to build RPMs from source. Especially for Red Hat Enterprise Server 5.3 and later, please be sure to install the kernel-devel in addition to any kernel specific devel package such as kernel-xen-devel or kernel-PAE-devel)
  • RPM build tools
]]> IMPORTANT: Before deploying software updates on a target system, be sure that a recent backup of the target system is available in the event the deployment procedure fails.

Supplement installation for Linux servers has the following minimum requirements:

  • glibc 2.2.4-26 or later
  • gawk 3.1.0-3 or later
  • sed 3.02-10 or later
  • pciutils-2.1.8-25.i386.rpm or later

The following RPMs are also required:

    On Red Hat servers:
  • rpm 4.0.4 or later
  • rpm-build 4.0.4 or later
  • rpm-devel 4.0.4 or later
    On SUSE Linux servers:
  • rpm 3.0.6 or later

To successfully deploy HP SUM on remote target systems based on a Linux operating system, the following must be available:

  • tcl-8.x package
  • expect-5.x package

In addition, components that are compiled from source code (such as NIC drivers) require the presence of the following build tools:

  • gcc-2.96-108.1 or later
  • cpp-2.96-108.1 or later
  • binutils-2.11.90.0.8 or later
  • glibc-devel-2.2.4-26 or later
  • kernel-headers- (The version number depends on which kernel is used.)

Installing these updates requires legacy compatibility libraries be loaded. The autorun script will detect missing libraries and prompt for their installation. For example, under SLES 11 32 or 64 bit, you must install the compatibility RPM package.

The command interpreter (shell) /bin/bash must be installed.

For autorun capabilties, the system must be running X with a window manager and an installed browser. For some distributions, the CD must be mounted and the ./autorun command executed for autorun to function.

Note: Please ensure the following RPMs are also installed.

    For Red Hat Enterprise Linux 5 AMD64/EM64T servers:
  • compat-libstdc++-296-2.96-132.7.2.i386 or later
  • lm_sensors-2.8.7-2.x86_64 or later
  • net-snmp-5.3.1-14.el5.x86_64 or later
  • perl (needed to provide the libperl.so)
  • libnl (needed for QLogic and Emulex drivers)

The following RPMs needed only on the local Linux system running HP SUM to perform builds of NIC source RPMs)

  • gcc-2.96-108.1 or later
  • kernel-devel (needed to build RPMs from source. Especially for Red Hat Enterprise Server 5.3 and later, please be sure to install the kernel-devel in addition to any kernel specific devel package such as kernel-xen-devel or kernel-PAE-devel)
  • RPM build tools
]]> Installation of the Supplement for HP Service Pack for ProLiant Using Autorun: supplements may be installed via autorun if autorun is configured on the target Linux server.

Red Hat distributions include autorun. If autorun is not installed, it must be installed and properly configured before beginning. Autorun will typically mount the CD-ROM on /media/cdrom for Red Hat Enterprise Linux 4 and SUSE-based distributions.

For the purposes of these instructions, the CD-ROM is assumed to have been mounted on /mnt/mnt. The actual mount point should replace /mnt/mnt when executing these instructions.

Manual Installation of the Supplement for HP Service Pack :
For the remainder of this discussion, the CD mount directory will be considered to be /mnt/mnt. The actual mount point should replace /mnt/mnt when executing these instructions. Red Hat Enterprise Linux 4 and SUSE-based distributions mount CD's on /media/cdrom. If the CD-ROM mount point is not defined in /etc/fstab, a complete mount command will be required.

  • Login on the console as root.
  • Insert the SmartStart CD.
  • Mount the CD (e.g. mount /mnt/mnt or mount -t iso9660 /dev/cdrom /mnt/mnt).
  • Change to the /compaq/csp/linux directory.
  • Execute the ./hpsum command to install the Linux ProLiant Support Pack.
  • The installer will open an interactive session which will allow you to install the Linux ProLiant Support Pack.

Note: Please ensure the following RPMs are also installed.

    For SLES 11 x86 servers:
  • perl (needed to provide the libperl.so)
  • compat-libstdc++-296-2.96-132.7.2.i386 or later
  • libstdc++33-3.3.3-11.9.i586 or later
  • perl-SNMP-5.4.2.1-6.3.i586 or later
  • net-snmp-5.4.2.1-6.3.i586 or later
  • libnl (needed for QLogic and Emulex drivers)
    For SLES 11 AMD64/EM64T servers:
  • glib-1.2.10-15.i386 or later
  • compat-libstdc++-296-2.96-132.7.2.i386 or later
  • libstdc++33-32bit-3.3.3-11.9 or later
  • perl-SNMP-5.4.2.1-6.3.x86_64 or later
  • net-snmp-5.4.2.1-6.3.x86_64 or later
  • libnl (needed for QLogic and Emulex drivers)

To perform builds of NIC source RPMs, the following RPMs are required on the local Linux system running HP SUM.

  • gcc-2.96-108.1 or later
  • kernel-devel (required to build RPMs from source.  Be sure to install the kernel-devel in addition to any kernel specific devel package such as kernel-xen-devel or kernel-PAE-devel)
  • kernel-syms
  • RPM build tools

NOTE: Be sure to include the version of the compatibility libraries that is appropriate for your architecture. In some cases, there are separate 32-bit and 64-bit compatibility libraries for a given distribution.

For a current list of supported Linux distributions and versions (and their associated errata kernels), see the operating system support matrixes . The supplments are designed for use after you install the operating system so that you can update drivers, install HP utilities (such as Health and iLO drivers), and install agents (Server, NIC, and Storage).

]]> Installation of the Supplement for HP Service Pack for ProLiant Using Autorun: supplements may be installed via autorun if autorun is configured on the target Linux server.

Red Hat distributions include autorun. If autorun is not installed, it must be installed and properly configured before beginning. Autorun will typically mount the CD-ROM on /media/cdrom for Red Hat Enterprise Linux 4 and SUSE-based distributions.

For the purposes of these instructions, the CD-ROM is assumed to have been mounted on /mnt/mnt. The actual mount point should replace /mnt/mnt when executing these instructions.

Manual Installation of the Supplement for HP Service Pack :
For the remainder of this discussion, the CD mount directory will be considered to be /mnt/mnt. The actual mount point should replace /mnt/mnt when executing these instructions. Red Hat Enterprise Linux 4 and SUSE-based distributions mount CD's on /media/cdrom. If the CD-ROM mount point is not defined in /etc/fstab, a complete mount command will be required.

  • Login on the console as root.
  • Insert the SmartStart CD.
  • Mount the CD (e.g. mount /mnt/mnt or mount -t iso9660 /dev/cdrom /mnt/mnt).
  • Change to the /compaq/csp/linux directory.
  • Execute the ./hpsum command to install the Linux ProLiant Support Pack.
  • The installer will open an interactive session which will allow you to install the Linux ProLiant Support Pack.

Note: Please ensure the following RPMs are also installed.

    For SLES 11 x86 servers:
  • perl (needed to provide the libperl.so)
  • compat-libstdc++-296-2.96-132.7.2.i386 or later
  • libstdc++33-3.3.3-11.9.i586 or later
  • perl-SNMP-5.4.2.1-6.3.i586 or later
  • net-snmp-5.4.2.1-6.3.i586 or later
  • libnl (needed for QLogic and Emulex drivers)
    For SLES 11 AMD64/EM64T servers:
  • glib-1.2.10-15.i386 or later
  • compat-libstdc++-296-2.96-132.7.2.i386 or later
  • libstdc++33-32bit-3.3.3-11.9 or later
  • perl-SNMP-5.4.2.1-6.3.x86_64 or later
  • net-snmp-5.4.2.1-6.3.x86_64 or later
  • libnl (needed for QLogic and Emulex drivers)

To perform builds of NIC source RPMs, the following RPMs are required on the local Linux system running HP SUM.

  • gcc-2.96-108.1 or later
  • kernel-devel (required to build RPMs from source.  Be sure to install the kernel-devel in addition to any kernel specific devel package such as kernel-xen-devel or kernel-PAE-devel)
  • kernel-syms
  • RPM build tools

NOTE: Be sure to include the version of the compatibility libraries that is appropriate for your architecture. In some cases, there are separate 32-bit and 64-bit compatibility libraries for a given distribution.

For a current list of supported Linux distributions and versions (and their associated errata kernels), see the operating system support matrixes . The supplments are designed for use after you install the operating system so that you can update drivers, install HP utilities (such as Health and iLO drivers), and install agents (Server, NIC, and Storage).

]]> Installation of the Supplement for HP Service Pack for ProLiant Using Autorun: supplements may be installed via autorun if autorun is configured on the target Linux server.

Red Hat distributions include autorun. If autorun is not installed, it must be installed and properly configured before beginning. Autorun will typically mount the CD-ROM on /media/cdrom for Red Hat Enterprise Linux 4 and SUSE-based distributions.

For the purposes of these instructions, the CD-ROM is assumed to have been mounted on /mnt/mnt. The actual mount point should replace /mnt/mnt when executing these instructions.

Manual Installation of the Supplement for HP Service Pack :
For the remainder of this discussion, the CD mount directory will be considered to be /mnt/mnt. The actual mount point should replace /mnt/mnt when executing these instructions. Red Hat Enterprise Linux 4 and SUSE-based distributions mount CD's on /media/cdrom. If the CD-ROM mount point is not defined in /etc/fstab, a complete mount command will be required.

  • Login on the console as root.
  • Insert the SmartStart CD.
  • Mount the CD (e.g. mount /mnt/mnt or mount -t iso9660 /dev/cdrom /mnt/mnt).
  • Change to the /compaq/csp/linux directory.
  • Execute the ./hpsum command to install the Linux ProLiant Support Pack.
  • The installer will open an interactive session which will allow you to install the Linux ProLiant Support Pack.

Note: Please ensure the following RPMs are also installed.

    For SLES 11 x86 servers:
  • perl (needed to provide the libperl.so)
  • compat-libstdc++-296-2.96-132.7.2.i386 or later
  • libstdc++33-3.3.3-11.9.i586 or later
  • perl-SNMP-5.4.2.1-6.3.i586 or later
  • net-snmp-5.4.2.1-6.3.i586 or later
  • libnl (needed for QLogic and Emulex drivers)
    For SLES 11 AMD64/EM64T servers:
  • glib-1.2.10-15.i386 or later
  • compat-libstdc++-296-2.96-132.7.2.i386 or later
  • libstdc++33-32bit-3.3.3-11.9 or later
  • perl-SNMP-5.4.2.1-6.3.x86_64 or later
  • net-snmp-5.4.2.1-6.3.x86_64 or later
  • libnl (needed for QLogic and Emulex drivers)

To perform builds of NIC source RPMs, the following RPMs are required on the local Linux system running HP SUM.

  • gcc-2.96-108.1 or later
  • kernel-devel (required to build RPMs from source.  Be sure to install the kernel-devel in addition to any kernel specific devel package such as kernel-xen-devel or kernel-PAE-devel)
  • kernel-syms
  • RPM build tools

NOTE: Be sure to include the version of the compatibility libraries that is appropriate for your architecture. In some cases, there are separate 32-bit and 64-bit compatibility libraries for a given distribution.

For a current list of supported Linux distributions and versions (and their associated errata kernels), see the operating system support matrixes . The supplments are designed for use after you install the operating system so that you can update drivers, install HP utilities (such as Health and iLO drivers), and install agents (Server, NIC, and Storage).

]]> Installation of the Supplement for HP Service Pack for ProLiant Using Autorun: supplements may be installed via autorun if autorun is configured on the target Linux server.

Red Hat distributions include autorun. If autorun is not installed, it must be installed and properly configured before beginning. Autorun will typically mount the CD-ROM on /media/cdrom for Red Hat Enterprise Linux 4 and SUSE-based distributions.

For the purposes of these instructions, the CD-ROM is assumed to have been mounted on /mnt/mnt. The actual mount point should replace /mnt/mnt when executing these instructions.

Manual Installation of the Supplement for HP Service Pack :
For the remainder of this discussion, the CD mount directory will be considered to be /mnt/mnt. The actual mount point should replace /mnt/mnt when executing these instructions. Red Hat Enterprise Linux 4 and SUSE-based distributions mount CD's on /media/cdrom. If the CD-ROM mount point is not defined in /etc/fstab, a complete mount command will be required.

  • Login on the console as root.
  • Insert the SmartStart CD.
  • Mount the CD (e.g. mount /mnt/mnt or mount -t iso9660 /dev/cdrom /mnt/mnt).
  • Change to the /compaq/csp/linux directory.
  • Execute the ./hpsum command to install the Linux ProLiant Support Pack.
  • The installer will open an interactive session which will allow you to install the Linux ProLiant Support Pack.

Note: Please ensure the following RPMs are also installed.

    For SLES 11 x86 servers:
  • perl (needed to provide the libperl.so)
  • compat-libstdc++-296-2.96-132.7.2.i386 or later
  • libstdc++33-3.3.3-11.9.i586 or later
  • perl-SNMP-5.4.2.1-6.3.i586 or later
  • net-snmp-5.4.2.1-6.3.i586 or later
  • libnl (needed for QLogic and Emulex drivers)
    For SLES 11 AMD64/EM64T servers:
  • glib-1.2.10-15.i386 or later
  • compat-libstdc++-296-2.96-132.7.2.i386 or later
  • libstdc++33-32bit-3.3.3-11.9 or later
  • perl-SNMP-5.4.2.1-6.3.x86_64 or later
  • net-snmp-5.4.2.1-6.3.x86_64 or later
  • libnl (needed for QLogic and Emulex drivers)

To perform builds of NIC source RPMs, the following RPMs are required on the local Linux system running HP SUM.

  • gcc-2.96-108.1 or later
  • kernel-devel (required to build RPMs from source.  Be sure to install the kernel-devel in addition to any kernel specific devel package such as kernel-xen-devel or kernel-PAE-devel)
  • kernel-syms
  • RPM build tools

NOTE: Be sure to include the version of the compatibility libraries that is appropriate for your architecture. In some cases, there are separate 32-bit and 64-bit compatibility libraries for a given distribution.

For a current list of supported Linux distributions and versions (and their associated errata kernels), see the operating system support matrixes . The supplments are designed for use after you install the operating system so that you can update drivers, install HP utilities (such as Health and iLO drivers), and install agents (Server, NIC, and Storage).

]]> Installation of the Supplement for HP Service Pack for ProLiant Using Autorun: supplements may be installed via autorun if autorun is configured on the target Linux server.

Red Hat distributions include autorun. If autorun is not installed, it must be installed and properly configured before beginning. Autorun will typically mount the CD-ROM on /media/cdrom for Red Hat Enterprise Linux 4 and SUSE-based distributions.

For the purposes of these instructions, the CD-ROM is assumed to have been mounted on /mnt/mnt. The actual mount point should replace /mnt/mnt when executing these instructions.

Manual Installation of the Supplement for HP Service Pack :
For the remainder of this discussion, the CD mount directory will be considered to be /mnt/mnt. The actual mount point should replace /mnt/mnt when executing these instructions. Red Hat Enterprise Linux 4 and SUSE-based distributions mount CD's on /media/cdrom. If the CD-ROM mount point is not defined in /etc/fstab, a complete mount command will be required.

  • Login on the console as root.
  • Insert the SmartStart CD.
  • Mount the CD (e.g. mount /mnt/mnt or mount -t iso9660 /dev/cdrom /mnt/mnt).
  • Change to the /compaq/csp/linux directory.
  • Execute the ./hpsum command to install the Linux ProLiant Support Pack.
  • The installer will open an interactive session which will allow you to install the Linux ProLiant Support Pack.

Note: Please ensure the following RPMs are also installed.

    For SLES 11 x86 servers:
  • perl (needed to provide the libperl.so)
  • compat-libstdc++-296-2.96-132.7.2.i386 or later
  • libstdc++33-3.3.3-11.9.i586 or later
  • perl-SNMP-5.4.2.1-6.3.i586 or later
  • net-snmp-5.4.2.1-6.3.i586 or later
  • libnl (needed for QLogic and Emulex drivers)
    For SLES 11 AMD64/EM64T servers:
  • glib-1.2.10-15.i386 or later
  • compat-libstdc++-296-2.96-132.7.2.i386 or later
  • libstdc++33-32bit-3.3.3-11.9 or later
  • perl-SNMP-5.4.2.1-6.3.x86_64 or later
  • net-snmp-5.4.2.1-6.3.x86_64 or later
  • libnl (needed for QLogic and Emulex drivers)

To perform builds of NIC source RPMs, the following RPMs are required on the local Linux system running HP SUM.

  • gcc-2.96-108.1 or later
  • kernel-devel (required to build RPMs from source.  Be sure to install the kernel-devel in addition to any kernel specific devel package such as kernel-xen-devel or kernel-PAE-devel)
  • kernel-syms
  • RPM build tools

NOTE: Be sure to include the version of the compatibility libraries that is appropriate for your architecture. In some cases, there are separate 32-bit and 64-bit compatibility libraries for a given distribution.

For a current list of supported Linux distributions and versions (and their associated errata kernels), see the operating system support matrixes . The supplments are designed for use after you install the operating system so that you can update drivers, install HP utilities (such as Health and iLO drivers), and install agents (Server, NIC, and Storage).

]]> The release notes for this version of the supplement are available at: http://www.hp.com/go/spp/documentation.

]]> The release notes for this version of the supplement are available at: http://www.hp.com/go/spp/documentation.

]]> このバージョンのサプリメントのリリースノートは、ここから入手可能です。 http://www.hp.com/jp/spp_doc

]]> The release notes for this version of the supplement are available at: http://www.hp.com/go/spp/documentation.

]]> The release notes for this version of the supplement are available at: http://www.hp.com/go/spp/documentation.

]]> cciss-kmp-default-4.6.28-23.sles11sp1.i586.rpm cciss-kmp-default-4.6.28-23.sles11sp2.i586.rpm cciss-kmp-default-4.6.28-23.sles11sp3.i586.rpm cciss-kmp-pae-4.6.28-23.sles11sp1.i586.rpm cciss-kmp-pae-4.6.28-23.sles11sp2.i586.rpm cciss-kmp-pae-4.6.28-23.sles11sp3.i586.rpm cciss-kmp-xen-4.6.28-23.sles11sp1.i586.rpm cciss-kmp-default-4.6.28-23.sles11sp1.x86_64.rpm cciss-kmp-default-4.6.28-23.sles11sp2.x86_64.rpm cciss-kmp-default-4.6.28-23.sles11sp3.x86_64.rpm cciss-kmp-xen-4.6.28-23.sles11sp1.x86_64.rpm cciss-kmp-xen-4.6.28-23.sles11sp2.x86_64.rpm cciss-kmp-xen-4.6.28-23.sles11sp3.x86_64.rpm hpahcisr-kmp-pae-1.2.6-16.sles11sp3.i586.rpm hpahcisr-kmp-default-1.2.6-16.sles11sp1.i586.rpm hpahcisr-kmp-pae-1.2.6-16.sles11sp1.i586.rpm hpahcisr-kmp-pae-1.2.6-16.sles11sp2.i586.rpm hpahcisr-kmp-default-1.2.6-16.sles11sp2.i586.rpm hpahcisr-kmp-default-1.2.6-16.sles11sp3.i586.rpm hpahcisr-kmp-default-1.2.6-16.sles11sp2.x86_64.rpm hpahcisr-kmp-default-1.2.6-16.sles11sp3.x86_64.rpm hpahcisr-kmp-default-1.2.6-16.sles11sp1.x86_64.rpm lsi-mpt2sas-kmp-default-15.10.02.00-1.sles11sp2.i586.rpm lsi-mpt2sas-kmp-default-15.10.02.00-1.sles11sp3.i586.rpm lsi-mpt2sas-kmp-pae-15.10.02.00-1.sles11sp2.i586.rpm lsi-mpt2sas-kmp-xen-15.10.02.00-1.sles11sp3.i586.rpm lsi-mpt2sas-kmp-default-15.10.02.00-1.sles11sp1.i586.rpm lsi-mpt2sas-kmp-pae-15.10.02.00-1.sles11sp3.i586.rpm lsi-mpt2sas-kmp-xen-15.10.02.00-1.sles11sp1.i586.rpm lsi-mpt2sas-kmp-pae-15.10.02.00-1.sles11sp1.i586.rpm lsi-mpt2sas-kmp-xen-15.10.02.00-1.sles11sp2.i586.rpm lsi-mpt2sas-kmp-xen-15.10.02.00-1.sles11sp2.x86_64.rpm lsi-mpt2sas-kmp-default-15.10.02.00-1.sles11sp1.x86_64.rpm lsi-mpt2sas-kmp-xen-15.10.02.00-1.sles11sp3.x86_64.rpm lsi-mpt2sas-kmp-default-15.10.02.00-1.sles11sp2.x86_64.rpm lsi-mpt2sas-kmp-default-15.10.02.00-1.sles11sp3.x86_64.rpm lsi-mpt2sas-kmp-xen-15.10.02.00-1.sles11sp1.x86_64.rpm hpvsa-kmp-default-1.2.6-27.sles11sp1.i586.rpm hpvsa-kmp-default-1.2.6-27.sles11sp2.i586.rpm hpvsa-kmp-default-1.2.6-27.sles11sp3.i586.rpm hpvsa-kmp-pae-1.2.6-27.sles11sp1.i586.rpm hpvsa-kmp-pae-1.2.6-27.sles11sp2.i586.rpm hpvsa-kmp-pae-1.2.6-27.sles11sp3.i586.rpm hpvsa-kmp-xen-1.2.6-27.sles11sp1.i586.rpm hpvsa-kmp-default-1.2.6-27.sles11sp1.x86_64.rpm hpvsa-kmp-default-1.2.6-27.sles11sp2.x86_64.rpm hpvsa-kmp-default-1.2.6-27.sles11sp3.x86_64.rpm hpvsa-kmp-xen-1.2.6-27.sles11sp1.x86_64.rpm hpvsa-kmp-xen-1.2.6-27.sles11sp2.x86_64.rpm hpvsa-kmp-xen-1.2.6-27.sles11sp3.x86_64.rpm hpsa-kmp-default-3.4.2-4.sles11sp1.i586.rpm hpsa-kmp-default-3.4.2-4.sles11sp2.i586.rpm hpsa-kmp-default-3.4.2-4.sles11sp3.i586.rpm hpsa-kmp-pae-3.4.2-4.sles11sp1.i586.rpm hpsa-kmp-pae-3.4.2-4.sles11sp2.i586.rpm hpsa-kmp-pae-3.4.2-4.sles11sp3.i586.rpm hpsa-kmp-xen-3.4.2-4.sles11sp1.i586.rpm hpsa-kmp-default-3.4.2-4.sles11sp1.x86_64.rpm hpsa-kmp-default-3.4.2-4.sles11sp2.x86_64.rpm hpsa-kmp-default-3.4.2-4.sles11sp3.x86_64.rpm hpsa-kmp-xen-3.4.2-4.sles11sp1.x86_64.rpm hpsa-kmp-xen-3.4.2-4.sles11sp2.x86_64.rpm hpsa-kmp-xen-3.4.2-4.sles11sp3.x86_64.rpm hp-health-9.40-1602.38.sles11.i586.rpm hp-health-9.40-1602.38.sles11.x86_64.rpm hp-snmp-agents-9.40-2506.38.sles11.i586.rpm hp-snmp-agents-9.40-2506.38.sles11.x86_64.rpm hpsmh-7.2.2-8.i386.rpm hpsmh-7.2.2-8.x86_64.rpm hp-smh-templates-9.4.0-1327.37.noarch.rpm hp-ams-1.4.1-1089.1.sles11.i586.rpm hp-ams-1.4.1-1089.1.sles11.x86_64.rpm hponcfg-4.2.0-0.i386.rpm hponcfg-4.2.0-0.x86_64.rpm hpssa-1.50-4.0.i386.rpm hpssa-1.50-4.0.x86_64.rpm hpssacli-1.50-4.0.i386.rpm hpssacli-1.50-4.0.x86_64.rpm hpdiags-9.5.0-938.linux.i586.rpm hpdiags-9.5.0-938.linux.x86_64.rpm