HP ProLiant Smart Array Controller (x86/AMD32) Driver for Red Hat Enterprise Linux 6 (x86) HP ProLiant Smart Array 控制器 (x86/AMD32) 驅動程式（適用於 Red Hat Enterprise Linux 6 (x86)） HP ProLiant Smart Array Controller (x86/AMD32) Driver for Red Hat Enterprise Linux 6 (x86) HP ProLiant Smart Array 控制器 (x86/AMD32) 驅動程式（適用於 Red Hat Enterprise Linux 6 (x86)） Hewlett-Packard Development Company, L.P. Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 6 Server (x86) kmod-hpsa-3.4.14-118.rhel6.i686.rpm Storage 儲存裝置 Server 伺服器 Driver - Storage Controller 驅動程式 ─ 儲存裝置控制器 美式英文 Login as the system administrator (root), download the RPM to a directory on
your hard drive and change to that directory.

To install or upgrade the driver type:

# rpm -Uvh kmod-hpsa-<version>.<OSupdate>.i686.rpm

Setup is now complete. Please REBOOT your computer NOW!!

NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

# rpm -e kmod-hpsa-<version>.<OSupdate>.i686.rpm

Customer Service
For support for ProLiant Smart Array controllers, please visit
http://welcome.hp.com/country/us/en/contact_us.html

Source code available at http://sourceforge.net/projects/cciss/files/

]]> 以系統管理員 (root) 的身分登入，將 RPM 下載至
硬碟上的目錄，並變更至該目錄。

要安裝或升級此驅動程式類型，請鍵入：

# rpm -Uvh kmod-hpsa-<版本>..i686.rpm

安裝隨即完成。請立即重新啟動您的電腦！

附註： 若安裝失敗，或出現任何警告或錯誤訊息，請立即停止，並請勿重新啟動電腦。此驅動程式將無法使用，您必須鍵入下列命令來解除安裝驅動程式：

# rpm -e kmod-hpsa-<版本>..i686.rpm

客戶服務
如需 ProLiant Smart Array 控制器的支援，請造訪
http://welcome.hp.com/country/us/en/contact_us.html

原始程式碼可從以下網址取得：http://sourceforge.net/projects/cciss/files/

]]> 103C 323A 103C 3241 103C 323A 103C 3243 103C 323A 103C 3245 103C 323A 103C 3247 103c 323a 103c 3249 103C 323A 103C 324A 103C 323A 103C 324B 103c 323b 103c 3350 103c 323b 103c 3354 103c 323b 103c 3355 103c 323b 103c 3351 103c 323b 103c 3352 103c 323b 103c 3353 103C 323B 103C 3356 103c 323c 103c 1922 103c 323c 103c 1923 103c 323c 103c 1926 103c 323c 103c 1924 103c 323c 103c 1921 103c 323c 103c 1928 103c 3239 103c 21CD 103c 3239 103c 21ce kmod-hpsa-3.4.14-118.rhel6u3.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1341117836/v119439/kmod-hpsa-3.4.14-118.rhel6u3.i686.rpm kmod-hpsa-3.4.14-118.rhel6u8.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1341117836/v119439/kmod-hpsa-3.4.14-118.rhel6u8.i686.rpm kmod-hpsa-3.4.14-118.rhel6u1.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1341117836/v119439/kmod-hpsa-3.4.14-118.rhel6u1.i686.rpm kmod-hpsa-3.4.14-118.rhel6u6.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1341117836/v119439/kmod-hpsa-3.4.14-118.rhel6u6.i686.rpm kmod-hpsa-3.4.14-118.rhel6u7.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1341117836/v119439/kmod-hpsa-3.4.14-118.rhel6u7.i686.rpm kmod-hpsa-3.4.14-118.rhel6u4.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1341117836/v119439/kmod-hpsa-3.4.14-118.rhel6u4.i686.rpm kmod-hpsa-3.4.14-118.rhel6u5.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1341117836/v119439/kmod-hpsa-3.4.14-118.rhel6u5.i686.rpm kmod-hpsa-3.4.14-118.rhel6u2.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1341117836/v119439/kmod-hpsa-3.4.14-118.rhel6u2.i686.rpm HP ProLiant Smart Array Controller (AMD64/EM64T) Driver for Red Hat Enterprise Linux 6 (AMD64/EM64T) HP ProLiant Smart Array 控制器 (AMD64/EM64T) 驅動程式（適用於 Red Hat Enterprise Linux 6 (AMD64/EM64T)） HP ProLiant Smart Array Controller (AMD64/EM64T) Driver for Red Hat Enterprise Linux 6 (AMD64/EM64T) HP ProLiant Smart Array 控制器 (AMD64/EM64T) 驅動程式（適用於 Red Hat Enterprise Linux 6 (AMD64/EM64T)） Hewlett-Packard Development Company, L.P. Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 6 Server (x86-64) kmod-hpsa-3.4.14-118.rhel6.x86_64.rpm Storage 儲存裝置 Server 伺服器 Driver - Storage Controller 驅動程式 ─ 儲存裝置控制器 美式英文 your hard drive and change to that directory.

To install or upgrade the driver type:


    # rpm -Uvh kmod-hpsa-<version>.<OSupdate>.x86_64.rpm  

Setup is now complete. Please REBOOT your computer NOW!!

NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

    # rpm -e kmod-hpsa-<version>.<OSupdate>.x86_64.rpm

Customer Service
For support for ProLiant Smart Array controllers, please visit
http://welcome.hp.com/country/us/en/contact_us.html

Source code available at http://sourceforge.net/projects/cciss/files/

]]> 硬碟上的目錄，並變更至該目錄。

要安裝或升級此驅動程式類型，請鍵入：


    # rpm -Uvh kmod-hpsa-<版本>..x86_64.rpm  

安裝隨即完成。請立即重新啟動您的電腦！

附註： 若安裝失敗，或出現任何警告或錯誤訊息，請立即停止，並請勿重新啟動電腦。此驅動程式將無法使用，您必須鍵入下列命令來解除安裝驅動程式：

    # rpm -e kmod-hpsa-<版本>..x86_64.rpm

客戶服務
如需 ProLiant Smart Array 控制器的支援，請造訪
http://welcome.hp.com/country/us/en/contact_us.html

原始程式碼可從以下網址取得：http://sourceforge.net/projects/cciss/files/

]]> 103C 323A 103C 3241 103C 323A 103C 3243 103C 323A 103C 3245 103C 323A 103C 3247 103c 323a 103c 3249 103C 323A 103C 324A 103C 323A 103C 324B 103c 323b 103c 3350 103c 323b 103c 3354 103c 323b 103c 3355 103c 323b 103c 3351 103c 323b 103c 3352 103c 323b 103c 3353 103c 323c 103c 1922 103c 323c 103c 1923 103c 323c 103c 1926 103c 323c 103c 1924 103c 323c 103c 1921 103c 323c 103c 1928 103c 3239 103c 21BD 103c 3239 103c 21bf 103c 3239 103c 21c0 103c 3239 103c 21c2 103c 3239 103c 21c3 103c 3239 103c 21c6 103c 3239 103c 21c7 103c 3239 103c 21c8 103c 3239 103c 21cb 103c 3239 103c 21be 103c 3239 103c 21c5 103c 3239 103c 21ca 103c 3239 103c 21c1 103C 323B 103C 3356 103c 3239 103c 21CD 103c 3239 103c 21ce kmod-hpsa-3.4.14-118.rhel6u2.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1084848254/v119441/kmod-hpsa-3.4.14-118.rhel6u2.x86_64.rpm kmod-hpsa-3.4.14-118.rhel6u6.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1084848254/v119441/kmod-hpsa-3.4.14-118.rhel6u6.x86_64.rpm kmod-hpsa-3.4.14-118.rhel6u1.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1084848254/v119441/kmod-hpsa-3.4.14-118.rhel6u1.x86_64.rpm kmod-hpsa-3.4.14-118.rhel6u5.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1084848254/v119441/kmod-hpsa-3.4.14-118.rhel6u5.x86_64.rpm kmod-hpsa-3.4.14-118.rhel6u4.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1084848254/v119441/kmod-hpsa-3.4.14-118.rhel6u4.x86_64.rpm kmod-hpsa-3.4.14-118.rhel6u3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1084848254/v119441/kmod-hpsa-3.4.14-118.rhel6u3.x86_64.rpm kmod-hpsa-3.4.14-118.rhel6u7.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1084848254/v119441/kmod-hpsa-3.4.14-118.rhel6u7.x86_64.rpm kmod-hpsa-3.4.14-118.rhel6u8.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1084848254/v119441/kmod-hpsa-3.4.14-118.rhel6u8.x86_64.rpm Red Hat Enterprise Linux 6 Server (x86-64) FCoE/FC Driver Kit for HPE Qlogic CNAs, HBAs and mezzanine HBAs 適用於 HPE Qlogic CNA、HBA 及夾層卡 HBA 的 Red Hat Enterprise Linux 6 Server (x86-64) FCoE/FC 驅動程式套件 Red Hat Enterprise Linux 6 Server (x86-64) FCoE/FC Driver Kit for HPE Qlogic CNAs, HBAs and mezzanine HBAs 適用於 HPE Qlogic CNA、HBA 及夾層卡 HBA 的 Red Hat Enterprise Linux 6 Server (x86-64) FCoE/FC 驅動程式套件 Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 6 Server (x86-64) ServerOptions ServerOptions Networking 網路 Storage 儲存裝置 Driver - Storage Fibre Channel and Fibre Channel Over Ethernet 驅動程式 - 儲存裝置光纖通道與乙太網路光纖通道 美式英文, 日文 1. Login as the system administrator (root).

2. Download the RPM to a directory on your hard drive and change to that directory.

3. To install or upgrade the driver, type the following command at the prompt:

                    # rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm

                    Example: # rpm -Uvh kmod-qla2xxx-4.6.28-20.rhel6u1.x86_64.rpm

4. When the installation or upgrade is complete, the following message displays:

                    Setup is now complete. Please REBOOT your computer NOW!!

IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

                    # rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm

]]> 1. Login as the system administrator (root).

2. Download the RPM to a directory on your hard drive and change to that directory.

3. To install or upgrade the driver, type the following command at the prompt:

                    # rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm

                    Example: # rpm -Uvh kmod-qla2xxx-4.6.28-20.rhel6u1.x86_64.rpm

4. When the installation or upgrade is complete, the following message displays:

                    Setup is now complete. Please REBOOT your computer NOW!!

IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:

                    # rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm

]]> 1077 2031 103C 1939 1077 2532 103C 338E 1077 2432 103C 7041 1077 2432 103C 7040 1077 2031 103C 17E8 1077 2031 103C 17E7 1077 2432 1077 0137 1077 2432 1077 0138 1077 2532 1077 015C 1077 2532 1077 015D 1077 2532 103C 3263 1077 2532 103C 3262 1077 2532 103C 3261 1077 2432 103C 1705 1077 8021 103c 3348 1077 8021 103C 1957 kmod-qlgc-qla2xxx-8.07.00.29.06.0_k1-2.rhel6u6.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p313298117/v118832/kmod-qlgc-qla2xxx-8.07.00.29.06.0_k1-2.rhel6u6.x86_64.rpm kmod-qlgc-qla2xxx-8.07.00.29.06.0_k1-2.rhel6u8.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p313298117/v118832/kmod-qlgc-qla2xxx-8.07.00.29.06.0_k1-2.rhel6u8.x86_64.rpm kmod-qlgc-qla2xxx-8.07.00.29.06.0_k1-2.rhel6u7.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p313298117/v118832/kmod-qlgc-qla2xxx-8.07.00.29.06.0_k1-2.rhel6u7.x86_64.rpm HPE System Health Application and Command Line Utilities for Red Hat Enterprise Linux 6 (x86) HPE 系統狀況應用程式與命令列公用程式（適用於 Red Hat Enterprise Linux 6 (x86)） hp-health hp-health Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 6 Server (x86) Storage 儲存裝置 Server 伺服器 Software - System Management 軟體 ─ 系統管理 美式英文 To get the list of all dependency files for hp-health, type:

      rpm –qp –requires hp-health-< version >.rpm

]]> 要取得 hp-health 所有相依性檔案的清單，請鍵入：

      rpm –qp –要求 hp-health-<版本>.rpm

]]> Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

To install the package type:

      rpm -ivh hp-health-<version>.rpm

To check whether the package is loaded properly type:

      /etc/init.d/hp-health status

Additional help is available by typing:

      man hp-health

            or

      man hp_mgmt_install

]]> 以系統管理員 (root) 的身分登入，將 RPM 下載至硬碟上的目錄，並變更至該目錄。

要安裝此套件，請鍵入：

      rpm -ivh hp-health-<版本>.rpm

若要確認是否正確載入套件，請鍵入：

      /etc/init.d/hp-health status

鍵入以下命令可以取得其他說明：

      man hp-health

            或

      man hp_mgmt_install

]]> hp-health-10.40-1777.17.rhel6.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1641406976/v111049/hp-health-10.40-1777.17.rhel6.i686.rpm HPE System Health Application and Command Line Utilities for Red Hat Enterprise Linux 6 (AMD64/EM64T) HPE 系統狀況應用程式與命令列公用程式（適用於 Red Hat Enterprise Linux 6 (AMD64/EM64T)） hp-health hp-health Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 6 Server (x86-64) Storage 儲存裝置 Server 伺服器 Software - System Management 軟體 ─ 系統管理 美式英文 The hp-health and hp-snmp-agents run as 32 bit applications in the x86_64 environment.  The Linux kernel 32 bit compatibility must be enabled (usual default for Linux) and the 32 bit compatibility libraries must be present.

To get the list of all dependency files for hp-health, type:

      rpm –qp –requires hp-health-< version >.rpm

]]> hp-health 與 hp-snmp-agents 在 x86_64 環境中以 32 位元應用程式執行。您必須啟用 Linux 核心 32 位元相容性（通常為 Linux 的預設值），且 32 位元相容性程式庫必須存在。

要取得 hp-health 所有相依性檔案的清單，請鍵入：

      rpm –qp –要求 hp-health-<版本>.rpm

]]> Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

To install the package type:

      rpm -ivh hp-health-<version>.rpm

To check whether the package is loaded properly type:

      /etc/init.d/hp-health status

Additional help is available by typing:

      man hp-health

            or

      man hp_mgmt_install

]]> 以系統管理員 (root) 的身分登入，將 RPM 下載至硬碟上的目錄，並變更至該目錄。

要安裝此套件，請鍵入：

      rpm -ivh hp-health-<版本>.rpm

若要確認是否正確載入套件，請鍵入：

      /etc/init.d/hp-health status

鍵入以下命令可以取得其他說明：

      man hp-health

            或

      man hp_mgmt_install

]]> hp-health-10.40-1777.17.rhel6.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1803411339/v111050/hp-health-10.40-1777.17.rhel6.x86_64.rpm HPE SNMP Agents for Red Hat Enterprise Linux 6 (x86) 適用於 Red Hat Enterprise Linux 6 (x86) 的 HPE SNMP 代理程式 hp-snmp-agents hp-snmp-agents Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 6 Server (x86) Storage 儲存裝置 Server 伺服器 Software - System Management 軟體 ─ 系統管理 美式英文 To get the list of all dependency files for hp-snmp-agents type:

rpm –qp –-requires hp-snmp-agents-<version>.rpm

]]> 要取得 hp-snmp-agents 所有相依性檔案的清單，請鍵入：

rpm –qp –-要求 hp-snmp-agents-<版本>.rpm

]]> Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

To install the package, type:

         rpm -ivh hp-snmp-agents-<version>.rpm

To check whether the package is loaded properly type:

         /etc/init.d/hp-snmp-agents status

Additional help is available by typing:

         man hp-snmp-agents

]]> 以系統管理員 (root) 的身分登入，將 RPM 下載至硬碟上的目錄，並變更至該目錄。

要安裝此套件，請鍵入：

         rpm -ivh hp-snmp-agents-<版本>.rpm

若要確認是否正確載入套件，請鍵入：

         /etc/init.d/hp-snmp-agents status

鍵入以下命令可以取得其他說明：

         man hp-snmp-agents

]]> hp-snmp-agents-10.40-2847.17.rhel6.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1584980684/v111056/hp-snmp-agents-10.40-2847.17.rhel6.i686.rpm HPE SNMP Agents for Red Hat Enterprise Linux 6 (AMD64/EM64T) 適用於 Red Hat Enterprise Linux 6 (AMD64/EM64T) 的 HPE SNMP 代理程式 hp-snmp-agents hp-snmp-agents Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 6 Server (x86-64) Storage 儲存裝置 Server 伺服器 Software - System Management 軟體 ─ 系統管理 美式英文 The hp-health and hp-snmp-agents run as 32 bit applications in the x86_64 environment.  The Linux kernel 32 bit compatibility must be enabled (usual default for Linux) and the 32 bit compatibility libraries must be present.

To get the list of all dependency files for hp-snmp-agents type:

         rpm –qp –-requires hp-snmp-agents-<version>.rpm

]]> hp-health 與 hp-snmp-agents 在 x86_64 環境中以 32 位元應用程式執行。您必須啟用 Linux 核心 32 位元相容性（通常為 Linux 的預設值），且 32 位元相容性程式庫必須存在。

要取得 hp-snmp-agents 所有相依性檔案的清單，請鍵入：

         rpm –qp –-要求 hp-snmp-agents-<版本>.rpm

]]> Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

To install the package, type:

         rpm -ivh hp-snmp-agents-<version>.rpm

To check whether the package is loaded properly type:

         /etc/init.d/hp-snmp-agents status

Additional help is available by typing:

         man hp-snmp-agents

]]> 以系統管理員 (root) 的身分登入，將 RPM 下載至硬碟上的目錄，並變更至該目錄。

要安裝此套件，請鍵入：

         rpm -ivh hp-snmp-agents-<版本>.rpm

若要確認是否正確載入套件，請鍵入：

         /etc/init.d/hp-snmp-agents status

鍵入以下命令可以取得其他說明：

         man hp-snmp-agents

]]> hp-snmp-agents-10.40-2847.17.rhel6.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1792297611/v111057/hp-snmp-agents-10.40-2847.17.rhel6.x86_64.rpm HP System Management Homepage for Linux (x86) HP 系統管理首頁 (適用於 Linux x86) HP System Management Homepage HP 系統管理首頁 Hewlett-Packard Development Company, L.P. Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 9 (x86) Red Hat Enterprise Linux 4 (x86) SUSE LINUX Enterprise Server 10 (x86) Red Hat Enterprise Linux 5 Server (x86) Oracle Linux 5 (x86) Citrix XenServer 5.x SUSE LINUX Enterprise Server 11 (x86) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 5 Desktop (x86) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 hpsmh-7.5.4-3.i386.rpm Server 伺服器 Software - System Management 軟體 ─ 系統管理 美式英文, 日文
  • Installation: rpm -ivh hpsmh-< version >.i386.rpm
  • Upgrade (from lower version to higher version): rpm -Uvh hpsmh-<version>.i386.rpm
  • Reinstallation (of same version): rpm -Uvh hpsmh-<version>.i386.rpm
  • Downgrade (from higher version to lower version): User needs to uninstall the higher version (rpm –e hpsmh-<version>) and then install the lower version (rpm -ivh hpsmh-<version>.i386.rpm).
    • ]]>
  • 安裝： rpm -ivh hpsmh-<版本>.i386.rpm
  • 升級 (從較舊版本升級至更高版本)： rpm -Uvh hpsmh-<版本>.i386.rpm
  • 重新安裝 (相同版本)： rpm -Uvh hpsmh-<版本>.i386.rpm
  • 降級 (從較高版本降級至較舊版本)： 使用者需解除安裝較高版本 (rpm –e hpsmh-<版本>)，然後再安裝較舊版本 (rpm -ivh hpsmh-<版本>.i386.rpm)。
    • ]]>         SMH 7.5.4 is aligned with Gen9 Snap5 SPP

    ]]>         SMH 7.5.4 對齊 Gen9 Snap5 SPP

    ]]>         Supported in Internet Explorer, Firefox and Chrome browsers

    ]]>         在 Internet Explorer、 Firefox 和 Chrome 瀏覽器支援

    ]]>         hpsmh-7.5.4-3.i386.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1224445684/v112776/hpsmh-7.5.4-3.i386.rpm     HP System Management Homepage for Linux (AMD64/EM64T) HP 系統管理首頁 (適用於 Linux AMD64/EM64T) HP System Management Homepage for Linux (AMD64/EM64T) HP 系統管理首頁 (適用於 Linux AMD64/EM64T) Hewlett-Packard Development Company, L.P. Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 9 (AMD64/EM64T) Red Hat Enterprise Linux 4 (AMD64/EM64T) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (AMD64/EMT64) Citrix XenServer 5.x SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 6 Workstation (x86-64) Red Hat Enterprise Linux 5 Desktop (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 hpsmh-7.5.4-3.x86_64.rpm Server 伺服器 Software - System Management 軟體 ─ 系統管理 美式英文, 日文
  • Installation: rpm -ivh hpsmh-< version >.x86_64.rpm
  • Upgrade (from lower version to higher version): rpm -Uvh hpsmh-<version>.x86_64.rpm>
  • Reinstallation (of same version): rpm -Uvh hpsmh-<version>.x86_64.rpm
  • Downgrade (from higher version to lower version): User needs to uninstall the higher version (rpm –e hpsmh-<version>) and then install the lower version (rpm -ivh hpsmh-<version>.x86_64.rpm).
    • ]]>
  • 安裝： rpm -ivh hpsmh-<版本>.x86_64.rpm
  • 升級 (從較舊版本升級至更高版本)： rpm -Uvh hpsmh-<版本>.x86_64.rpm>
  • 重新安裝 (相同版本)： rpm -Uvh hpsmh-<版本>.x86_64.rpm
  • 降級 (從較高版本降級至較舊版本)： 使用者需解除安裝較高版本 (rpm –e hpsmh-<版本>)，然後再安裝較舊版本 (rpm -ivh hpsmh-<版本>.x86_64.rpm)。
    • ]]>         SMH 7.5.4 is aligned with Gen9 Snap5 SPP

    ]]>         SMH 7.5.4 對齊 Gen9 Snap5 SPP

    ]]>         Supported in Internet Explorer, Firefox and Chrome browsers

    ]]>         在 Internet Explorer、 Firefox 和 Chrome 瀏覽器支援

    ]]>         hpsmh-7.5.4-3.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1580676007/v112777/hpsmh-7.5.4-3.x86_64.rpm     HPE System Management Homepage Templates for Linux 適用於 Linux 的 HPE System Management Homepage (系統管理首頁) 範本 hp-smh-templates hp-smh-templates Hewlett Packard Enterprise Hewlett Packard Enterprise SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 hp-smh-templates-10.1.0-%build.version_subst%.noarch Storage 儲存裝置 Server 伺服器 Software - System Management 軟體 ─ 系統管理 美式英文 To get the list of all dependency files for hp-smh-templates type:

    rpm –qp –-requires hp-smh-templates-<version>.rpm

    ]]>         要取得 hp-smh-templates 所有相依性檔案的清單，請鍵入：

    rpm –qp –-要求 hp-smh-templates-<版本>.rpm

    ]]>         Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

    To install the package type:

             rpm -ivh hp-smh-templates-<version>.rpm

    To check whether the package is installed type:

             rpm –q hp-smh-templates

    Additional help is available by typing:

             man hp-smh-templates

    ]]>         以系統管理員 (root) 的身分登入，將 RPM 下載至硬碟上的目錄，並變更至該目錄。

    要安裝此套件，請鍵入：

             rpm -ivh hp-smh-templates-<版本>.rpm

    要檢查套件是否安裝，請鍵入：

             rpm –q hp-smh-templates

    鍵入以下命令可以取得其他說明：

             man hp-smh-templates

    ]]>         hp-smh-templates-10.4.0-1455.24.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1825663794/v111055/hp-smh-templates-10.4.0-1455.24.noarch.rpm     HPE ProLiant Agentless Management Service for Red Hat Enterprise Linux 6 (x86) HPE ProLiant 無代理程式管理服務 (適用於 Red Hat Enterprise Linux 6 (x86)) hp-ams hp-ams Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 6 Server (x86) Lights Out Lights-Out Storage 儲存裝置 Server 伺服器 Software - System Management 軟體 ─ 系統管理 美式英文
  • hp-ams only supported on HP ProLiant Gen8 and Gen9 Servers.
  • hp-ams provides information to the HP iLO 4 service providing SNMP support.
  • SNMP PASS-THRU on the HP iLO 4 MUST be disabled, and SNMP should be configured on the HP iLO 4. The HP iLO 4 may need to be reset after changing these settings.
  • Requirements:
    • Minimum HP iLO 4 Firmware Version = 1.05
    • Minimum supported OS Versions = Red Hat Enterprise Linux 5.6, Red Hat Enterprise Linux 6.0, SuSE Linux Enterprise Server 10 SP4, SuSE Linux Enterprise Server 11 SP1
    • ]]>
  • 僅 HP ProLiant Gen8 及 Gen9 伺服器支援 hp-ams。
  • hp-ams 可提供 HP iLO 4 服務 (其提供 SNMP 支援) 的相關資訊。
  • 您必須停用 HP iLO 4 上的 SNMP PASS-THRU，且必須在 HP iLO 4 上設定 SNMP。變更這些設定後，可能需要重新啟動 HP iLO 4。
  • 需求：
    • 最低的 HP iLO 4 韌體版本 = 1.05
    • 最低支援的 OS 版本 = Red Hat Enterprise Linux 5.6、Red Hat Enterprise Linux 6.0、SuSE Linux Enterprise Server 10 SP4、SuSE Linux Enterprise Server 11 SP1
    • ]]>         Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

    To install the package type:

          rpm -ivh hp-ams-<version>.rpm

    To check whether the package is loaded properly type:

          /etc/init.d/hp-ams status

    Additional help is available by typing:

          man hp-ams

    ]]>         以系統管理員 (root) 的身分登入，將 RPM 下載至硬碟上的目錄，並變更至該目錄。

    要安裝此套件，請鍵入：

          rpm -ivh hp-ams-<版本>.rpm

    若要確認是否正確載入套件，請鍵入：

          /etc/init.d/hp-ams status

    鍵入以下命令可以取得其他說明：

          man hp-ams

    ]]>         Diagnosing connection issues:

    Verify that the HP iLO 4 is talking to SNMP from a Linux system with net-snmp utilities installed:

    snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.1.1

    Verify that HP AMS is operating on the Server:

    snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.5.1

    ]]>         診斷連線問題：

    確認 HP iLO 4 正利用已安裝的 net-snmp 公用程式，從 Linux 系統來與 SNMP 通訊：

    snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.1.1

    確認 HP AMS 在伺服器上正確運作：

    snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.5.1

    ]]>         hp-ams-2.4.0-1906.24.rhel6.i686.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p982136922/v110889/hp-ams-2.4.0-1906.24.rhel6.i686.rpm     HPE ProLiant Agentless Management Service for Red Hat Enterprise Linux 6 (AMD64/EM64T) HPE ProLiant 無代理程式管理服務 (適用於 Red Hat Enterprise Linux 6 (AMD64/EM64T)) hp-ams hp-ams Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 6 Server (x86-64) Lights Out Lights-Out Storage 儲存裝置 Server 伺服器 Software - System Management 軟體 ─ 系統管理 美式英文
  • hp-ams only supported on HP ProLiant Gen8 and Gen9 Servers.
  • hp-ams provides information to the HP iLO 4 service providing SNMP support.
  • SNMP PASS-THRU on the HP iLO 4 MUST be disabled, and SNMP should be configured on the HP iLO 4. The HP iLO 4 may need to be reset after changing these settings.
  • Requirements:
    • Minimum HP iLO 4 Firmware Version = 1.05
    • Minimum supported OS Versions = Red Hat Enterprise Linux 5.6, Red Hat Enterprise Linux 6.0, SuSE Linux Enterprise Server 10 SP4, SuSE Linux Enterprise Server 11 SP1
    • ]]>
  • 僅 HP ProLiant Gen8 及 Gen9 伺服器支援 hp-ams。
  • hp-ams 可提供 HP iLO 4 服務 (其提供 SNMP 支援) 的相關資訊。
  • 您必須停用 HP iLO 4 上的 SNMP PASS-THRU，且必須在 HP iLO 4 上設定 SNMP。變更這些設定後，可能需要重新啟動 HP iLO 4。
  • 需求：
    • 最低的 HP iLO 4 韌體版本 = 1.05
    • 最低支援的 OS 版本 = Red Hat Enterprise Linux 5.6、Red Hat Enterprise Linux 6.0、SuSE Linux Enterprise Server 10 SP4、SuSE Linux Enterprise Server 11 SP1
    • ]]>         Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

    To install the package type:

          rpm -ivh hp-ams-<version>.rpm

    To check whether the package is loaded properly type:

          /etc/init.d/hp-ams status

    Additional help is available by typing:

          man hp-ams

    ]]>         以系統管理員 (root) 的身分登入，將 RPM 下載至硬碟上的目錄，並變更至該目錄。

    要安裝此套件，請鍵入：

          rpm -ivh hp-ams-<版本>.rpm

    若要確認是否正確載入套件，請鍵入：

          /etc/init.d/hp-ams status

    鍵入以下命令可以取得其他說明：

          man hp-ams

    ]]>         Diagnosing connection issues:

    Verify that the HP iLO 4 is talking to SNMP from a Linux system with net-snmp utilities installed:

    snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.1.1

    Verify that HP AMS is operating on the Server:

    snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.5.1

    ]]>         診斷連線問題：

    確認 HP iLO 4 正利用已安裝的 net-snmp 公用程式，從 Linux 系統來與 SNMP 通訊：

    snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.1.1

    確認 HP AMS 在伺服器上正確運作：

    snmpwalk -t 60 -v 2c -Ox -c iLO4_configured_community_string iLO4_IP_Address 1.3.6.1.4.1.232.5.1

    ]]>         hp-ams-2.4.0-1906.24.rhel6.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p159256077/v110887/hp-ams-2.4.0-1906.24.rhel6.x86_64.rpm     HPE Smart Storage Administrator (HPE SSA) CLI for Linux 適用於 Linux 的 HPE Smart Storage Administrator (HPE SSA) CLI HPE Smart Storage Administrator (HPE SSA) CLI for Linux 適用於 Linux 的 HPE Smart Storage Administrator (HPE SSA) CLI Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Linux 8.0 Red Hat Linux 7.3 Red Hat Linux 7.2 Red Hat Enterprise Linux 2.1 Red Hat Enterprise Linux 3 (x86) SUSE Linux Enterprise Server 8 SUSE LINUX Enterprise Server 9 (x86) SUSE LINUX Enterprise Server 7 Red Hat Enterprise Linux 4 (x86) SUSE LINUX Enterprise Server 10 (x86) Red Hat Enterprise Linux 5 Server (x86) Oracle Linux 5 (x86) SUSE LINUX Enterprise Server 11 (x86) Red Hat Enterprise Linux 6 Server (x86) Oracle Linux 6 (x86) Red Hat Linux 7.1 Red Hat Linux 7.0 Red Hat Linux 6.2 Red Hat Linux 6.1 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 hpssacli-2.40-13.0.i386.rpm Storage 儲存裝置 Server 伺服器 Software - System Management 軟體 ─ 系統管理 美式英文, 日文, 德文, 法文, 義大利文, 西班牙文 HPE SSA CLI is distributed using Red Hat Package Manager (RPM) packages.

    If there is an older version of HPE SSA CLI installed on the system, please use "rpm -e hpssacli" to remove it first.

    Use "rpm -i " to install the application.

    ]]>         HPE SSA CLI 利用 Red Hat 套件管理員 (RPM) 套件進行配送。

    若系統上已安裝舊版的 HPE SSA CLI，請先使用「rpm -e hpssacli」將其移除。

    使用「rpm -i」來安裝應用程式。

    ]]>         hpssacli-2.40-13.0.i386.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1999196580/v114619/hpssacli-2.40-13.0.i386.rpm     HPE Smart Storage Administrator (HPE SSA) CLI for Linux 64-bit 適用於 Linux 64 位元的 HPE Smart Storage Administrator (HPE SSA) CLI HPE Smart Storage Administrator (HPE SSA) CLI for Linux 64-bit 適用於 Linux 64 位元的 HPE Smart Storage Administrator (HPE SSA) CLI Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 3 (AMD64/EM64T) SUSE LINUX Enterprise Server 9 (AMD64/EM64T) Red Hat Enterprise Linux 4 (AMD64/EM64T) SUSE LINUX Enterprise Server 8 (AMD64) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (AMD64/EMT64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 hpssacli-2.40-13.0.x86_64.rpm Storage 儲存裝置 Server 伺服器 Software - System Management 軟體 ─ 系統管理 美式英文, 日文, 德文, 法文, 義大利文, 西班牙文 HPE SSA CLI is distributed using Red Hat Package Manager (RPM) packages.

    If there is an older version of HPE SSA CLI installed on the system, please use "rpm -e hpssacli" to remove it first.

    Use "rpm -i " to install the application.

    ]]>         HPE SSA CLI 利用 Red Hat 套件管理員 (RPM) 套件進行配送。

    若系統上已安裝舊版的 HPE SSA CLI，請先使用「rpm -e hpssacli」將其移除。

    使用「rpm -i」來安裝應用程式。

    ]]>         hpssacli-2.40-13.0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1857046646/v114618/hpssacli-2.40-13.0.x86_64.rpm     HPE Smart Storage Administrator Diagnostic Utility (HPE SSADU) CLI for Linux 64-bit 適用於 Linux 64 位元的 HPE Smart Storage Administrator Diagnostic Utility (HPE SSADU) CLI HPE Smart Storage Administrator Diagnostic Utility (HPE SSADU) CLI for Linux 64-bit 適用於 Linux 64 位元的 HPE Smart Storage Administrator Diagnostic Utility (HPE SSADU) CLI Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 3 (AMD64/EM64T) SUSE LINUX Enterprise Server 9 (AMD64/EM64T) Red Hat Enterprise Linux 4 (AMD64/EM64T) SUSE LINUX Enterprise Server 8 (AMD64) SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86-64) Oracle Linux 5 (AMD64/EMT64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Oracle Linux 6 (AMD64/EMT64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Oracle Linux 7 hpssaducli-2.40-13.0.x86_64.rpm Storage 儲存裝置 Server 伺服器 Software - System Management 軟體 ─ 系統管理 美式英文, 日文, 德文, 法文, 義大利文, 西班牙文 HPE SSADUCLI is distributed using Red Hat Package Manager (RPM) packages.

    If there is an older version of HPE SSADUCLI installed on the system, please use "rpm -e hpssaducli" to remove it first.

    Use "rpm -i " to install the application.

    ]]>         HPE SSADUCLI 利用 Red Hat 套件管理員 (RPM) 套件進行配送。

    若系統上已安裝舊版的 HPE SSADUCLI，請先使用 rpm -e hpssaducli 將其移除。

    使用「rpm -i」來安裝應用程式。

    ]]>         hpssaducli-2.40-13.0.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p219801368/v114622/hpssaducli-2.40-13.0.x86_64.rpm     HPE Smart Storage Administrator Diagnostic Utility (HPE SSADU) CLI for Linux 適用於 Linux 的 HPE Smart Storage Administrator Diagnostic Utility (HPE SSADU) CLI HPE Smart Storage Administrator Diagnostic Utility (HPE SSADU) CLI for Linux 適用於 Linux 的 HPE Smart Storage Administrator Diagnostic Utility (HPE SSADU) CLI Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Linux 8.0 Red Hat Linux 7.3 Red Hat Linux 7.2 Red Hat Enterprise Linux 2.1 Red Hat Enterprise Linux 3 (x86) SUSE Linux Enterprise Server 8 SUSE LINUX Enterprise Server 9 (x86) SUSE LINUX Enterprise Server 7 Red Hat Enterprise Linux 4 (x86) SUSE LINUX Enterprise Server 10 (x86) Red Hat Enterprise Linux 5 Server (x86) Oracle Linux 5 (x86) SUSE LINUX Enterprise Server 11 (x86) Red Hat Enterprise Linux 6 Server (x86) Oracle Linux 6 (x86) Red Hat Linux 7.1 Red Hat Linux 7.0 Red Hat Linux 6.2 Red Hat Linux 6.1 Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 hpssaducli-2.40-13.0.i386.rpm Storage 儲存裝置 Server 伺服器 Software - System Management 軟體 ─ 系統管理 美式英文, 日文, 德文, 法文, 義大利文, 西班牙文 HPE SSADUCLI is distributed using Red Hat Package Manager (RPM) packages.

    If there is an older version of HPE SSADUCLI installed on the system, please use "rpm -e hpssaducli" to remove it first.

    Use "rpm -i " to install the application.

    ]]>         HPE SSADUCLI 利用 Red Hat 套件管理員 (RPM) 套件進行配送。

    若系統上已安裝舊版的 HPE SSADUCLI，請先使用 rpm -e hpssaducli 將其移除。

    使用「rpm -i」來安裝應用程式。

    ]]>         hpssaducli-2.40-13.0.i386.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1399102072/v114623/hpssaducli-2.40-13.0.i386.rpm     HP Fibre Channel Enablement Kit for Linux - QLogic 適用於 Linux 的 HP 光纖通道啟用套件 - QLogic HP Fibre Channel Enablement Kit HP 光纖通道啟用套件 Hewlett-Packard Development Company, L.P. Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 ServerOptions ServerOptions Networking 網路 Storage 儲存裝置 Software - Storage Fibre Channel HBA 軟體 ─ 儲存裝置光纖通道 HBA 美式英文 There has been a change to the enablement kits. They are now vendor specific kits. It is recommended that you uninstall any previous kits prior to installation of this component.

    To uninstall the hp-fc-enablement RPM use the following command:

       # rpm -e hp-fc-enablement-<version>.noarch.rpm

    To install the vendor specific enablement RPM use the following command:

      # rpm -ivh HP-CNA_FC-hpqlgc-enablement-<version>.noarch.rpm 

    This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done.  Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HP StorageWorks Arrays reference guide for instructions on how to perform these functions.  The reference guide is available at the following link:

    http://www.hp.com/storage/spock/

     

    ]]>         啟用套件有所變更。 它們現為廠商特定套件。 建議您先解除安裝任何先前套件，然後再安裝此元件。

    若要解除安裝 hp-fc-enablement RPM，請使用下列命令：

       # rpm -e hp-fc-enablement-<版本>.noarch.rpm

    若要安裝廠商特定啟用套件 RPM，請使用下列命令：

      # rpm -ivh HP-CNA_FC-hpqlgc-enablement-<版本>.noarch.rpm 

    此版本的啟用套件不像先前版本那樣提供額外的重建 ram 磁碟或設定驅動程式參數的功能。如需如何執行這些功能的指示，請參閱「Native Linux Device-Mapper Multipath for HP StorageWorks Arrays (適用於 HP StorageWorks 陣列的原生 Linux 裝置對應程式多路徑)」參考指南的「Additional setup (額外設定)」一節。您可從下列連結取得參考指南：

    http://www.hp.com/storage/spock/

     

    ]]>         1077 2432 103C 7041 1077 2432 103C 7040 1077 2432 103C 1705 1077 2432 1077 0137 1077 2432 1077 0138 1077 2532 103C 3261 1077 2532 103C 3262 1077 2532 103C 3263 1077 2532 1077 015C 1077 2532 1077 015D 1077 2532 103C 338E 1077 8021 103c 3348 1077 2031 103C 17E8 1077 2031 103C 17E7 1077 2031 103C 1939 1077 8021 103C 1957 1077 8020 103C 1957 1077 8022 103C 1957 HP-CNA-FC-hpqlgc-Enablement-Kit-6.0.0.0-1.noarch.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p242974528/v111359/HP-CNA-FC-hpqlgc-Enablement-Kit-6.0.0.0-1.noarch.rpm     HPE Fibre Channel Enablement Kit for Red Hat Enterprise Linux 6 Server - Emulex 適用於 Red Hat Enterprise Linux 6 伺服器的 HPE 光纖通道啟用套件 - Emulex HPE Fibre Channel Enablement Kit for Red Hat Enterprise Linux 6 Server - Emulex 適用於 Red Hat Enterprise Linux 6 伺服器的 HPE 光纖通道啟用套件 - Emulex Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 6 Server (x86-64) ServerOptions ServerOptions Storage 儲存裝置 Networking 網路 Software - Storage Fibre Channel HBA 軟體 ─ 儲存裝置光纖通道 HBA 美式英文 The target environment must have the libHBAAPI Package installed prior to the installation of the enablement kit. (If not already present, the libHBAAPI Package can be obtained from the operating system installation media.)

    ]]>         目標環境必須已安裝 libHBAAPI 套件才能安裝啟用套件。(如果無 libHBAAPI 套件，可自作業系統安裝媒體取得 libHBAAPI 套件。)

    ]]>         There has been a change to the enablement kits in this release.  They are now vendor specific kits.   It is recommended that you uninstall any previous kits prior to installation of this component.

    To uninstall the hp-fc-enablement RPM use the following command:

       # rpm -e hp-fc-enablement-<version>.noarch.rpm

    To install the hp-fc-enablement RPM use the following command:

       # rpm -ivh HP-CNA-FC-Emulex-Enablement-Kit-<version>.<OS>.<architecture>.rpm

    This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done.  Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HP StorageWorks Arrays reference guide for instructions on how to perform these functions.  The reference guide is available at the following link:
     
                   http://www.hpe.com/storage/spock/
     

    ]]>         此版本中的啟用套件有所變更。它們現為廠商特定套件。   建議您先解除安裝任何先前套件，然後再安裝此元件。

    若要解除安裝 hp-fc-enablement RPM，請使用下列命令：

       # rpm -e hp-fc-enablement-<版本>.noarch.rpm

    若要安裝 hp-fc-enablement RPM，請使用下列命令：

       # rpm -ivh HP-CNA-FC-Emulex-Enablement-Kit-...rpm

    此版本的啟用套件不像先前版本那樣提供額外的重建 ram 磁碟或設定驅動程式參數的功能。如需如何執行這些功能的指示，請參閱「Native Linux Device-Mapper Multipath for HP StorageWorks Arrays (適用於 HP StorageWorks 陣列的原生 Linux 裝置對應程式多路徑)」參考指南的「Additional setup (額外設定)」一節。您可從下列連結取得參考指南：
     
                   http://www.hpe.com/storage/spock/
     

    ]]>         10DF F100 103C 3281 10DF F100 103C 3282 10DF F100 10DF F100 10DF E200 103C 17E5 10DF E200 103C 17E4 19A2 0714 103C 3344 19A2 0714 103C 3345 19A2 0714 103C 3315 19A2 0714 103C 337C 19A2 0714 103C 3376 19A2 0714 103C 337B 10DF F100 103C 338F 10DF F100 103C 1719 10DF E200 103C 197F 10DF E200 103C 197E 10DF E200 103C 1956 10DF 0724 103C 1935 10DF 0724 103C 1934 10DF 0724 103C 220A 10DF 0724 103C 21D4 10DF F100 103C 2238 10DF FE00 103C 1708 10DF FE00 10DF FE00 10DF F0E5 10DF F0E5 19a2 0704 103c 3314 10DF 0724 1590 8153 10DF 0724 103C 8144 HP-CNA-FC-Emulex-Enablement-Kit-10.7.110.34-1.rhel6.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p536983789/v115774/HP-CNA-FC-Emulex-Enablement-Kit-10.7.110.34-1.rhel6.x86_64.rpm     Fibreutils for HPE Storage Fibre Channel Host Bus Adapters for Linux (x86) 適用於 Linux (x86) 版 HPE Storage 光纖通道主機匯流排配接卡的 Fibreutil Fibreutils for HPE Storage Fibre Channel Host Bus Adapters (x86) 適用於 HPE Storage 光纖通道主機匯流排配接卡 (x86) 的 Fibreutil Hewlett Packard Enterprise Hewlett Packard Enterprise SUSE LINUX Enterprise Server 11 (x86) fibreutils-3.2-6.i386.rpm ServerOptions ServerOptions Networking 網路 Storage 儲存裝置 Software - Storage Fibre Channel HBA 軟體 ─ 儲存裝置光纖通道 HBA 美式英文  
    ]]>          
    ]]>         Use rpm -Uvh command to install/upgrade RPM.]]> 使用 rpm -Uvh 命令來安裝/升級 RPM。]]> 1077 2322 8086 34BC 10DF F0E5 10DF F0E5 10DF FE00 10DF FE00 1077 2432 103C 7041 1077 2432 103C 7040 1077 2432 103C 1705 10DF FE00 103C 1708 1077 2532 103C 3261 1077 2532 103C 3262 1077 2532 103C 3263 10DF F100 103C 3281 10DF F100 103C 1719 10DF F100 103C 3282 10DF F100 103C 338F 19A2 0714 103C 3344 10DF E200 103C 197F 10DF E200 103C 197E 10DF E200 103C 17E5 10DF E200 103C 17E4 10DF F100 10DF F100 19A2 0714 103C 3345 19A2 0714 103C 3315 19a2 0704 103c 3314 19A2 0714 103C 337C 19A2 0714 103C 3376 19A2 0714 103C 337B 10DF E200 103C 1956 1077 8021 103c 3348 1077 8021 103C 1957 1077 2532 103C 338E 1077 2031 103C 1939 1077 2031 103C 17E8 1077 2031 103C 17E7 1077 2432 1077 0137 1077 2432 1077 0138 1077 2532 1077 015C 1077 2532 1077 015D 10DF F100 103C 2238 fibreutils-3.2-6.i386.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1224445686/v112797/fibreutils-3.2-6.i386.rpm     Fibreutils for HPE Storage Fibre Channel Host Bus Adapters for Linux (x86_64) 適用於 Linux (x86_64) 版 HPE Storage 光纖通道主機匯流排配接卡的 Fibreutil Fibreutils for HPE Storage Fibre Channel Host Bus Adapters (x86_64) 適用於 HPE Storage 光纖通道主機匯流排配接卡的 Fibreutil (x86_64) 版 Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 6 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 fibreutils-3.2-6.x86_64.rpm ServerOptions ServerOptions Networking 網路 Storage 儲存裝置 Software - Storage Fibre Channel HBA 軟體 ─ 儲存裝置光纖通道 HBA 美式英文 ]]> ]]> Use rpm -Uvh command to install/upgrade RPM.]]> 使用 rpm -Uvh 命令來安裝/升級 RPM。]]> 1077 2322 8086 34BC 10DF F0E5 10DF F0E5 10DF FE00 10DF FE00 1077 2432 103C 7041 1077 2432 103C 7040 1077 2432 103C 1705 10DF FE00 103C 1708 1077 2532 103C 3261 1077 2532 103C 3262 1077 2532 103C 3263 10DF F100 103C 3281 10DF F100 103C 1719 10DF F100 103C 3282 10DF F100 103C 338F 10DF 0724 103C 21D4 19A2 0714 103C 3344 10DF 0724 103C 1935 10DF 0724 103C 1934 10DF 0724 103C 220A 10DF E200 103C 197F 10DF E200 103C 197E 10DF E200 103C 17E5 10DF E200 103C 17E4 10DF F100 10DF F100 19A2 0714 103C 3345 19A2 0714 103C 3315 19a2 0704 103c 3314 19A2 0714 103C 337C 19A2 0714 103C 3376 19A2 0714 103C 337B 10DF E200 103C 1956 1077 8021 103c 3348 1077 8021 103C 1957 1077 2532 103C 338E 1077 2031 103C 1939 1077 2031 103C 17E8 1077 2031 103C 17E7 1077 2432 1077 0137 1077 2432 1077 0138 1077 2532 1077 015C 1077 2532 1077 015D 1657 0021 103c 1779 1657 0013 103c 1742 1657 0017 103c 1743 10DF F100 103C 2238 10DF 0724 103C 8144 10DF 0724 1590 8153 fibreutils-3.2-6.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1224445687/v112798/fibreutils-3.2-6.x86_64.rpm Insight Diagnostics Online Edition for Linux (x86 32-bit) 適用於 Linux（x86 32 位元）的 HP Insight Diagnostics 線上版 Insight Diagnostics Online Edition for Linux (x86 32-bit) 適用於 Linux（x86 32 位元）的 HP Insight Diagnostics 線上版 Hewlett-Packard Development Company, L.P. Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (x86) Red Hat Enterprise Linux 5 Server (x86) SUSE LINUX Enterprise Server 11 (x86) Red Hat Enterprise Linux 6 Server (x86) hpdiags-10.50.2007.linux.i586.rpm Server 伺服器 Software - System Management 軟體 ─ 系統管理 美式英文, 日文, 德文, 法文, 義大利文, 西班牙文, 簡體中文
  • HP System Management Homepage, version 7.0.0-12 or higher
    • The following component(s) are recommended for HP Insight Diagnostics Online Edition for Linux to make full use of its capabilities:
    • HP System Health Application, version 9.0.0 or higher

    ]]>
  • HP System Management Homepage, 版本 7.0.0-12 或更高版本
    • 建議 HP Insight Diagnostics Online Edition (Linux) 使用如下元件以盡可能發揮其功能:
    • HP 系統健康狀況應用程式，版本 9.0.0 或更高版本

    ]]>         Login with a privileged acount and download the Insight Diagnostics rpm to a local directory and change to that directory. Enter the following command to install the utility:

    • rpm -Uvh < rpmFilename >

    For example, rpm -Uvh hpdiags-< version >.i586.rpm

    The Insight Diagnostics package installs itself and all related files in the directory: /opt/hp/hpdiags

    For other Insight Diagnostics command line options:

    • cd /opt/hp/hpdiags/
      ./hpdiags -?

    Note: Insight Diags can also be installed by using the SPP. See HP Service Pack for ProLiant Quick Start Guide for more information.

    ]]>         使用有權限的帳戶登入並且下載 Insight Diagnostics rpm 至本機目錄並變更至該目錄。輸入下列命令以安裝公用程式：

    • rpm -Uvh

    例如：rpm -Uvh hpdiags-<版本>.i586.rpm

    Insight Diagnostics 套件會自行安裝並安裝目錄中所有相關檔案： /opt/hp/hpdiags

    其他 Insight Diagnostics 命令列選項：

    • cd /opt/hp/hpdiags/
      ./hpdiags -?

    附註： 亦可使用 SPP 安裝 Insight Diags 如需詳細資訊，請參閱《HP Service Pack for ProLiant Quick Start Guide》(適用於 ProLiant 的 HP 服務套件快速入門指南)。

    ]]>         hpdiags-10.50.2007-2076.linux.i586.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p794310095/v113673/hpdiags-10.50.2007-2076.linux.i586.rpm     Insight Diagnostics Online Edition for Linux (x86-64) 適用於 Linux 的 HP Insight Diagnostics Online Edition (HP Insight 診斷程式線上版) (x86-64) Insight Diagnostics Online Edition for Linux (x86-64) 適用於 Linux 的 HP Insight Diagnostics Online Edition (HP Insight 診斷程式線上版) (x86-64) Hewlett-Packard Development Company, L.P. Hewlett-Packard Development Company, L.P. SUSE LINUX Enterprise Server 10 (AMD64/EM64T) Red Hat Enterprise Linux 5 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 hpdiags-10.50.2007.linux.x86_64.rpm Server 伺服器 Software - System Management 軟體 ─ 系統管理 美式英文, 日文, 德文, 法文, 義大利文, 西班牙文, 簡體中文 The following component(s) are required for HP Insight Diagnostics Online Edition for Linux:

    • HP System Management Homepage, version 7.0.0-12 or higher

    The following component(s) are recommended for HP Insight Diagnostics Online Edition for Linux to make full use of its capabilities:

    • HP System Health Application, version 9.0.0 or higher

    You can install them by using the SPP or downloading them individually from HP Support Center.

    ]]>         如下元件為 HP Insight Diagnostics Online Edition(Linux) 必需的:

    • HP System Management Homepage, 版本 7.0.0-12 或更高版本

    建議 HP Insight Diagnostics Online Edition (Linux) 使用如下元件以盡可能發揮其功能:

    • HP 系統健康狀況應用程式，版本 9.0.0 或更高版本

    您可以使用 SPP 進行安裝 或從 HP 支援中心個別下載。

    ]]>         Login with a privileged acount and download the Insight Diagnostics rpm to a local directory and change to that directory. Enter the following command to install the utility:

    • rpm -Uvh < rpmFilename >

    For example, rpm -Uvh hpdiags-< version >.x86_64.rpm

    The Insight Diagnostics package installs itself and all related files in the directory: /opt/hp/hpdiags

    For other Insight Diagnostics command line options:

    • cd /opt/hp/hpdiags/
      ./hpdiags -?

    Note: Insight Diags can also be installed by using the SPP. See HP Service Pack for ProLiant Quick Start Guide for more information.

    ]]>         使用有權限的帳戶登入並且下載 Insight Diagnostics rpm 至本機目錄並變更至該目錄。輸入下列命令以安裝公用程式：

    • rpm -Uvh

    例如：rpm -Uvh hpdiags-<版本>.x86_64.rpm

    Insight Diagnostics 套件會自行安裝並安裝目錄中所有相關檔案： /opt/hp/hpdiags

    其他 Insight Diagnostics 命令列選項：

    • cd /opt/hp/hpdiags/
      ./hpdiags -?

    附註： 亦可使用 SPP 安裝 Insight Diags 如需詳細資訊，請參閱《HP Service Pack for ProLiant Quick Start Guide》(適用於 ProLiant 的 HP 服務套件快速入門指南)。

    ]]>         hpdiags-10.50.2007-2076.linux.x86_64.rpm http://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1317534625/v113678/hpdiags-10.50.2007-2076.linux.x86_64.rpm