======================
Reference architecture
======================

The reference architecture defines the minimum environment necessary
to deploy OpenStack with Open Virtual Network (OVN) integration for
the Networking service in production with sufficient expectations
of scale and performance. For evaluation purposes, you can deploy this
environment using the :ref:`Installation Guide <installation>` or
`Vagrant <https://github.com/openstack/networking-ovn/tree/master/vagrant>`_.
Any scaling or performance evaluations should use bare metal instead of
virtual machines.

Layout
------

The reference architecture includes a minimum of four nodes.

The controller node contains the following components that provide enough
functionality to launch basic instances:

* One network interface for management
* Identity service
* Image service
* Networking management with ML2 mechanism driver for OVN (control plane)
* Compute management (control plane)

The database node contains the following components:

* One network interface for management
* OVN northbound service (``ovn-northd``)
* Open vSwitch (OVS) database service (``ovsdb-server``) for the OVN
  northbound database (``ovnnb.db``)
* Open vSwitch (OVS) database service (``ovsdb-server``) for the OVN
  southbound database (``ovnsb.db``)

.. note::

   For functional evaluation only, you can combine the controller and
   database nodes.

The two compute nodes contain the following components:

* Two or three network interfaces for management, overlay networks, and
  optionally provider networks
* Compute management (hypervisor)
* Hypervisor (KVM)
* OVN controller service (``ovn-controller``)
* OVS data plane service (``ovs-vswitchd``)
* OVS database service (``ovsdb-server``) with OVS local configuration
  (``conf.db``) database
* OVN metadata agent (``ovn-metadata-agent``)


The gateway nodes contain the following components:

* Three network interfaces for management, overlay networks and provider
  networks.
* OVN controller service (``ovn-controller``)
* OVS data plane service (``ovs-vswitchd``)
* OVS database service (``ovsdb-server``) with OVS local configuration
  (``conf.db``) database

.. note::

   Each OVN metadata agent provides metadata service locally on the compute
   nodes in a lightweight way. Each network being accessed by the instances of
   the compute node will have a corresponding metadata ovn-metadata-$net_uuid
   namespace, and inside an haproxy will funnel the requests to the
   ovn-metadata-agent over a unix socket.

   Such namespace can be very helpful for debug purposes to access the local
   instances on the compute node. If you login as root on such compute node
   you can execute:

   ip netns ovn-metadata-$net_uuid exec ssh user@my.instance.ip.address

Hardware layout
~~~~~~~~~~~~~~~

.. image:: figures/ovn-hw.png
   :alt: Hardware layout
   :align: center

Service layout
~~~~~~~~~~~~~~

.. image:: figures/ovn-services.png
   :alt: Service layout
   :align: center

Networking service with OVN integration
---------------------------------------

The reference architecture deploys the Networking service with OVN
integration as described in the following scenarios:

.. image:: figures/ovn-architecture1.png
  :alt: Architecture for Networking service with OVN integration
  :align: center


With networking-ovn, all the E/W traffic which traverses a virtual
router is completely distributed, going from compute to compute node
without passing through the gateway nodes.

N/S traffic that needs SNAT (without floating IPs) will always pass
through the centralized gateway nodes, although, as soon as you
have more than one gateway node networking-ovn will make use of
the HA capabilities of ovn.

Centralized Floating IPs
~~~~~~~~~~~~~~~~~~~~~~~~

In this architecture, all the N/S router traffic (snat and floating
IPs) goes through the gateway nodes.

The compute nodes don't need connectivity to the external network,
although it could be provided if we wanted to have direct connectivity
to such network from some instances.

For external connectivity, gateway nodes have to set ``ovn-cms-options``
with ``enable-chassis-as-gw`` in Open_vSwitch table's external_ids column,
for example:

.. code-block:: console

 $ ovs-vsctl set open . external-ids:ovn-cms-options="enable-chassis-as-gw"

Distributed Floating IPs (DVR)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

In this architecture, the floating IP N/S traffic flows directly
from/to the compute nodes through the specific provider network
bridge. In this case compute nodes need connectivity to the external
network.

Each compute node contains the following network components:

.. image:: figures/ovn-compute1.png
   :alt: Compute node network components
   :align: center

.. note::

   The Networking service creates a unique network namespace for each
   virtual network that enables the metadata service.

Several external connections can be optionally created via provider
bridges. Those can be used for direct vm connectivity to the specific
networks or the use of distributed floating ips.

.. _refarch_database-access:

Accessing OVN database content
------------------------------

OVN stores configuration data in a collection of OVS database tables.
The following commands show the contents of the most common database
tables in the northbound and southbound databases. The example database
output in this section uses these commands with various output filters.

.. code-block:: console

   $ ovn-nbctl list Logical_Switch
   $ ovn-nbctl list Logical_Switch_Port
   $ ovn-nbctl list ACL
   $ ovn-nbctl list Address_Set
   $ ovn-nbctl list Logical_Router
   $ ovn-nbctl list Logical_Router_Port
   $ ovn-nbctl list Gateway_Chassis

   $ ovn-sbctl list Chassis
   $ ovn-sbctl list Encap
   $ ovn-nbctl list Address_Set
   $ ovn-sbctl lflow-list
   $ ovn-sbctl list Multicast_Group
   $ ovn-sbctl list Datapath_Binding
   $ ovn-sbctl list Port_Binding
   $ ovn-sbctl list MAC_Binding
   $ ovn-sbctl list Gateway_Chassis

.. note::

   By default, you must run these commands from the node containing
   the OVN databases.

.. _refarch-adding-compute-node:

Adding a compute node
---------------------

When you add a compute node to the environment, the OVN controller
service on it connects to the OVN southbound database and registers
the node as a chassis.

.. code-block:: console

   _uuid               : 9be8639d-1d0b-4e3d-9070-03a655073871
   encaps              : [2fcefdf4-a5e7-43ed-b7b2-62039cc7e32e]
   external_ids        : {ovn-bridge-mappings=""}
   hostname            : "compute1"
   name                : "410ee302-850b-4277-8610-fa675d620cb7"
   vtep_logical_switches: []

The ``encaps`` field value refers to tunnel endpoint information
for the compute node.

.. code-block:: console

   _uuid               : 2fcefdf4-a5e7-43ed-b7b2-62039cc7e32e
   ip                  : "10.0.0.32"
   options             : {}
   type                : geneve

Security Groups/Rules
---------------------

Each security group will map to 2 Address_Sets in the OVN NB and SB
tables, one for ipv4 and another for ipv6, which will be used to hold ip
addresses for the ports that belong to the security group, so that rules
with remote_group_id can be efficiently applied.

.. todo: add block with openstack security group rule example

OVN operations
~~~~~~~~~~~~~~

#. Creating a security group will cause the OVN mechanism driver to create
   2 new entries in the Address Set table of the northbound DB:

   .. code-block:: console

      _uuid               : 9a9d01bd-4afc-4d12-853a-cd21b547911d
      addresses           : []
      external_ids        : {"neutron:security_group_name"=default}
      name                : "as_ip4_90a78a43_b549_4bee_8822_21fcccab58dc"

      _uuid               : 27a91327-636e-4125-99f0-6f2937a3b6d8
      addresses           : []
      external_ids        : {"neutron:security_group_name"=default}
      name                : "as_ip6_90a78a43_b549_4bee_8822_21fcccab58dc"

   In the above entries, the address set name include the protocol (IPv4
   or IPv6, written as ip4 or ip6) and the UUID of the Openstack security
   group, dashes translated to underscores.

#. In turn, these new entries will be translated by the OVN northd daemon
   into entries in the southbound DB:

   .. code-block:: console

      _uuid               : 886d7b3a-e460-470f-8af2-7c7d88ce45d2
      addresses           : []
      name                : "as_ip4_90a78a43_b549_4bee_8822_21fcccab58dc"

      _uuid               : 355ddcba-941d-4f1c-b823-dc811cec59ca
      addresses           : []
      name                : "as_ip6_90a78a43_b549_4bee_8822_21fcccab58dc"

Networks
--------

.. toctree::
   :maxdepth: 1

   provider-networks
   selfservice-networks

Routers
-------

.. toctree::
   :maxdepth: 1

   routers

.. todo: Explain L3HA modes available starting at OVS 2.8

Instances
---------

Launching an instance causes the same series of operations regardless
of the network. The following example uses the ``provider`` provider
network, ``cirros`` image, ``m1.tiny`` flavor, ``default`` security
group, and ``mykey`` key.

.. toctree::
   :maxdepth: 1

   launch-instance-provider-network
   launch-instance-selfservice-network

.. todo: Add north-south when OVN gains support for it.

   Traffic flows
   -------------

   East-west for instances on the same provider network
   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   East-west for instances on different provider networks
   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   East-west for instances on the same self-service network
   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   East-west for instances on different self-service networks
   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
