Release: 2.0.44 | Release Date: October 10, 2025

# SQLAlchemy 2.0 Documentation

ORM Querying Guide

This page is part of the ORM Querying Guide.

Previous: Writing SELECT statements for Inheritance Mappings | Next: Column Loading Options

# ORM-Enabled INSERT, UPDATE, and DELETE statements

About this Document

This section makes use of ORM mappings first illustrated in the SQLAlchemy Unified Tutorial, shown in the section Declaring Mapped Classes, as well as inheritance mappings shown in the section Mapping Class Inheritance Hierarchies.

View the ORM setup for this page.

The `Session.execute()` method, in addition to handling ORM-enabled `Select` objects, can also accommodate ORM-enabled `Insert`, `Update` and `Delete` objects, in various ways which are each used to INSERT, UPDATE, or DELETE many database rows at once. There is also dialect-specific support for ORM-enabled “upserts”, which are INSERT statements that automatically make use of UPDATE for rows that already exist.

The following table summarizes the calling forms that are discussed in this document:

ORM Use Case | DML Construct Used | Data is passed using … | Supports RETURNING? | Supports Multi-Table Mappings?
--- | --- | --- | --- | ---
ORM Bulk INSERT Statements | `insert()` | List of dictionaries to `Session.execute.params` | yes | yes
ORM Bulk Insert with SQL Expressions | `insert()` | `Session.execute.params` with `Insert.values()` | yes | yes
ORM Bulk Insert with Per Row SQL Expressions | `insert()` | List of dictionaries to `Insert.values()` | yes | no
ORM “upsert” Statements | `insert()` | List of dictionaries to `Insert.values()` | yes | no
ORM Bulk UPDATE by Primary Key | `update()` | List of dictionaries to `Session.execute.params` | no | yes
ORM UPDATE and DELETE with Custom WHERE Criteria | `update()`, `delete()` | keywords to `Update.values()` | yes | partial, with manual steps

## ORM Bulk INSERT Statements

A `insert()` construct can be constructed in terms of an ORM class and passed to the `Session.execute()` method. A list of parameter dictionaries sent to the `Session.execute.params` parameter, separate from the `Insert` object itself, will invoke bulk INSERT mode for the statement, which essentially means the operation will optimize as much as possible for many rows:

    >>> from sqlalchemy import insert
    >>> session.execute(
    ...     insert(User),
    ...     [
    ...         {"name": "spongebob", "fullname": "Spongebob Squarepants"},
    ...         {"name": "sandy", "fullname": "Sandy Cheeks"},
    ...         {"name": "patrick", "fullname": "Patrick Star"},
    ...         {"name": "squidward", "fullname": "Squidward Tentacles"},
    ...         {"name": "ehkrabs", "fullname": "Eugene H. Krabs"},
    ...     ],
    ... )
    INSERT INTO user_account (name, fullname) VALUES (?, ?)
    [...] [('spongebob', 'Spongebob Squarepants'), ('sandy', 'Sandy Cheeks'), ('patrick', 'Patrick Star'),
    ('squidward', 'Squidward Tentacles'), ('ehkrabs', 'Eugene H. Krabs')]
    <...>

The parameter dictionaries contain key/value pairs which may correspond to ORM mapped attributes that line up with mapped `Column` or `mapped_column()` declarations, as well as with composite declarations. The keys should match the ORM mapped attribute name and not the actual database column name, if these two names happen to be different.

Changed in version 2.0: Passing an `Insert` construct to the `Session.execute()` method now invokes a “bulk insert”, which makes use of the same functionality as the legacy `Session.bulk_insert_mappings()` method. This is a behavior change compared to the 1.x series where the `Insert` would be interpreted in a Core-centric way, using column names for value keys; ORM attribute keys are now accepted. Core-style functionality is available by passing the execution option `{"dml_strategy": "raw"}` to the `Session.execution_options` parameter of `Session.execute()`.

### Getting new objects with RETURNING

The bulk ORM insert feature supports INSERT..RETURNING for selected backends, which can return a `Result` object that may yield individual columns back as well as fully constructed ORM objects corresponding to the newly generated records. INSERT..RETURNING requires the use of a backend that supports SQL RETURNING syntax as well as support for executemany with RETURNING; this feature is available with all SQLAlchemy-included backends with the exception of MySQL (MariaDB is included).

As an example, we can run the same statement as before, adding use of the `UpdateBase.returning()` method, passing the full `User` entity as what we’d like to return. `Session.scalars()` is used to allow iteration of `User` objects:

    >>> users = session.scalars(
    ...     insert(User).returning(User),
    ...     [
    ...         {"name": "spongebob", "fullname": "Spongebob Squarepants"},
    ...         {"name": "sandy", "fullname": "Sandy Cheeks"},
    ...         {"name": "patrick", "fullname": "Patrick Star"},
    ...         {"name": "squidward", "fullname": "Squidward Tentacles"},
    ...         {"name": "ehkrabs", "fullname": "Eugene H. Krabs"},
    ...     ],
    ... )
    INSERT INTO user_account (name, fullname)
    VALUES (?, ?), (?, ?), (?, ?), (?, ?), (?, ?)
    RETURNING id, name, fullname, species
    [...] ('spongebob', 'Spongebob Squarepants', 'sandy', 'Sandy Cheeks',
    'patrick', 'Patrick Star', 'squidward', 'Squidward Tentacles',
    'ehkrabs', 'Eugene H. Krabs')
    >>> print(users.all())
    [User(name='spongebob', fullname='Spongebob Squarepants'),
     User(name='sandy', fullname='Sandy Cheeks'),
     User(name='patrick', fullname='Patrick Star'),
     User(name='squidward', fullname='Squidward Tentacles'),
     User(name='ehkrabs', fullname='Eugene H. Krabs')]

In the above example, the rendered SQL takes on the form used by the insertmanyvalues feature as requested by the SQLite backend, where individual parameter dictionaries are inlined into a single INSERT statement so that RETURNING may be used.

Changed in version 2.0: The ORM `Session` now interprets RETURNING clauses from `Insert`, `Update`, and even `Delete` constructs in an ORM context, meaning a mixture of column expressions and ORM mapped entities may be passed to the `Insert.returning()` method which will then be delivered in the way that ORM results are delivered from constructs such as `Select`, including that mapped entities will be delivered in the result as ORM mapped objects. Limited support for ORM loader options such as `load_only()` and `selectinload()` is also present.

#### Correlating RETURNING records with input data order

When using bulk INSERT with RETURNING, it’s important to note that most database backends provide no formal guarantee of the order in which the records from RETURNING are returned, including that there is no guarantee that their order will correspond to that of the input records. For applications that need to ensure RETURNING records can be correlated with input data, the additional parameter `Insert.returning.sort_by_parameter_order` may be specified, which depending on backend may use special INSERT forms that maintain a token which is used to reorder the returned rows appropriately, or in some cases, such as in the example below using the SQLite backend, the operation will INSERT one row at a time:

    >>> data = [
    ...     {"name": "pearl", "fullname": "Pearl Krabs"},
    ...     {"name": "plankton", "fullname": "Plankton"},
    ...     {"name": "gary", "fullname": "Gary"},
    ... ]
    >>> user_ids = session.scalars(
    ...     insert(User).returning(User.id, sort_by_parameter_order=True), data
    ... )
    INSERT INTO user_account (name, fullname) VALUES (?, ?) RETURNING id
    [... (insertmanyvalues) 1/3 (ordered; batch not supported)] ('pearl', 'Pearl Krabs')
    INSERT INTO user_account (name, fullname) VALUES (?, ?) RETURNING id
    [insertmanyvalues 2/3 (ordered; batch not supported)] ('plankton', 'Plankton')
    INSERT INTO user_account (name, fullname) VALUES (?, ?) RETURNING id
    [insertmanyvalues 3/3 (ordered; batch not supported)] ('gary', 'Gary')
    >>> for user_id, input_record in zip(user_ids, data):
    ...     input_record["id"] = user_id
    >>> print(data)
    [{'name': 'pearl', 'fullname': 'Pearl Krabs', 'id': 6},
    {'name': 'plankton', 'fullname': 'Plankton', 'id': 7},
    {'name': 'gary', 'fullname': 'Gary', 'id': 8}]

Added in version 2.0.10: Added `Insert.returning.sort_by_parameter_order` which is implemented within the insertmanyvalues architecture.

See also

Correlating RETURNING rows to parameter sets - background on approaches taken to guarantee correspondence between input data and result rows without significant loss of performance

### Using Heterogeneous Parameter Dictionaries

The ORM bulk insert feature supports lists of parameter dictionaries that are “heterogeneous”, which basically means “individual dictionaries can have different keys”. When this condition is detected, the ORM will break up the parameter dictionaries into groups corresponding to each set of keys and batch accordingly into separate INSERT statements:

    >>> users = session.scalars(
    ...     insert(User).returning(User),
    ...     [
    ...         {
    ...             "name": "spongebob",
    ...             "fullname": "Spongebob Squarepants",
    ...             "species": "Sea Sponge",
    ...         },
    ...         {"name": "sandy", "fullname": "Sandy Cheeks", "species": "Squirrel"},
    ...         {"name": "patrick", "species": "Starfish"},
    ...         {
    ...             "name": "squidward",
    ...             "fullname": "Squidward Tentacles",
    ...             "species": "Squid",
    ...         },
    ...         {"name": "ehkrabs", "fullname": "Eugene H. Krabs", "species": "Crab"},
    ...     ],
    ... )
    INSERT INTO user_account (name, fullname, species)
    VALUES (?, ?, ?), (?, ?, ?) RETURNING id, name, fullname, species
    [... (insertmanyvalues) 1/1 (unordered)] ('spongebob', 'Spongebob Squarepants', 'Sea Sponge',
    'sandy', 'Sandy Cheeks', 'Squirrel')
    INSERT INTO user_account (name, species)
    VALUES (?, ?) RETURNING id, name, fullname, species
    [...] ('patrick', 'Starfish')
    INSERT INTO user_account (name, fullname, species)
    VALUES (?, ?, ?), (?, ?, ?) RETURNING id, name, fullname, species
    [... (insertmanyvalues) 1/1 (unordered)] ('squidward', 'Squidward Tentacles',
    'Squid', 'ehkrabs', 'Eugene H. Krabs', 'Crab')

In the above example, the five parameter dictionaries passed translated into three INSERT statements, grouped along the specific sets of keys in each dictionary while still maintaining row order, i.e. `("name", "fullname", "species")`, `("name", "species")`, `("name","fullname", "species")`.

### Sending NULL values in ORM bulk INSERT statements

The bulk ORM insert feature draws upon a behavior that is also present in the legacy “bulk” insert behavior, as well as in the ORM unit of work overall, which is that rows which contain NULL values are INSERTed using a statement that does not refer to those columns; the rationale here is so that backends and schemas which contain server-side INSERT defaults that may be sensitive to the presence of a NULL value vs. no value present will produce a server side value as expected. This default behavior has the effect of breaking up the bulk inserted batches into more batches of fewer rows:

    >>> session.execute(
    ...     insert(User),
    ...     [
    ...         {
    ...             "name": "name_a",
    ...             "fullname": "Employee A",
    ...             "species": "Squid",
    ...         },
    ...         {
    ...             "name": "name_b",
    ...             "fullname": "Employee B",
    ...             "species": "Squirrel",
    ...         },
    ...         {
    ...             "name": "name_c",
    ...             "fullname": "Employee C",
    ...             "species": None,
    ...         },
    ...         {
    ...             "name": "name_d",
    ...             "fullname": "Employee D",
    ...             "species": "Bluefish",
    ...         },
    ...     ],
    ... )
    INSERT INTO user_account (name, fullname, species) VALUES (?, ?, ?)
    [...] [('name_a', 'Employee A', 'Squid'), ('name_b', 'Employee B', 'Squirrel')]
    INSERT INTO user_account (name, fullname) VALUES (?, ?)
    [...] ('name_c', 'Employee C')
    INSERT INTO user_account (name, fullname, species) VALUES (?, ?, ?)
    [...] ('name_d', 'Employee D', 'Bluefish')
    ...

Above, the bulk INSERT of four rows is broken into three separate statements, the second statement reformatted to not refer to the NULL column for the single parameter dictionary that contains a `None` value. This default behavior may be undesirable when many rows in the dataset contain random NULL values, as it causes the “executemany” operation to be broken into a larger number of smaller operations; particularly when relying upon insertmanyvalues to reduce the overall number of statements, this can have a bigger performance impact.

To disable the handling of `None` values in the parameters into separate batches, pass the execution option `render_nulls=True`; this will cause all parameter dictionaries to be treated equivalently, assuming the same set of keys in each dictionary:

    >>> session.execute(
    ...     insert(User).execution_options(render_nulls=True),
    ...     [
    ...         {
    ...             "name": "name_a",
    ...             "fullname": "Employee A",
    ...             "species": "Squid",
    ...         },
    ...         {
    ...             "name": "name_b",
    ...             "fullname": "Employee B",
    ...             "species": "Squirrel",
    ...         },
    ...         {
    ...             "name": "name_c",
    ...             "fullname": "Employee C",
    ...             "species": None,
    ...         },
    ...         {
    ...             "name": "name_d",
    ...             "fullname": "Employee D",
    ...             "species": "Bluefish",
    ...         },
    ...     ],
    ... )
    INSERT INTO user_account (name, fullname, species) VALUES (?, ?, ?)
    [...] [('name_a', 'Employee A', 'Squid'), ('name_b', 'Employee B', 'Squirrel'), ('name_c', 'Employee C', None), ('name_d', 'Employee D', 'Bluefish')]
    ...

Above, all parameter dictionaries are sent in a single INSERT batch, including the `None` value present in the third parameter dictionary.

Added in version 2.0.23: Added the `render_nulls` execution option which mirrors the behavior of the legacy `Session.bulk_insert_mappings.render_nulls` parameter.

### Bulk INSERT for Joined Table Inheritance

ORM bulk insert builds upon the internal system that is used by the traditional unit of work system in order to emit INSERT statements. This means that for an ORM entity that is mapped to multiple tables, typically one which is mapped using joined table inheritance, the bulk INSERT operation will emit an INSERT statement for each table represented by the mapping, correctly transferring server-generated primary key values to the table rows that depend upon them. The RETURNING feature is also supported here, where the ORM will receive `Result` objects for each INSERT statement executed, and will then “horizontally splice” them together so that the returned rows include values for all columns inserted:

    >>> managers = session.scalars(
    ...     insert(Manager).returning(Manager),
    ...     [
    ...         {"name": "sandy", "manager_name": "Sandy Cheeks"},
    ...         {"name": "ehkrabs", "manager_name": "Eugene H. Krabs"},
    ...     ],
    ... )
    INSERT INTO employee (name, type) VALUES (?, ?) RETURNING id, name, type
    [... (insertmanyvalues) 1/2 (ordered; batch not supported)] ('sandy', 'manager')
    INSERT INTO employee (name, type) VALUES (?, ?) RETURNING id, name, type
    [insertmanyvalues 2/2 (ordered; batch not supported)] ('ehkrabs', 'manager')
    INSERT INTO manager (id, manager_name) VALUES (?, ?), (?, ?) RETURNING id, manager_name, id AS id__1
    [... (insertmanyvalues) 1/1 (ordered)] (1, 'Sandy Cheeks', 2, 'Eugene H. Krabs')

Tip

Bulk INSERT of joined inheritance mappings requires that the ORM make use of the `Insert.returning.sort_by_parameter_order` parameter internally, so that it can correlate primary key values from RETURNING rows from the base table into the parameter sets being used to INSERT into the “sub” table, which is why the SQLite backend illustrated above transparently degrades to using non-batched statements. Background on this feature is at Correlating RETURNING rows to parameter sets.

### ORM Bulk Insert with SQL Expressions

The ORM bulk insert feature supports the addition of a fixed set of parameters which may include SQL expressions to be applied to every target row. To achieve this, combine the use of the `Insert.values()` method, passing a dictionary of parameters that will be applied to all rows, with the usual bulk calling form by including a list of parameter dictionaries that contain individual row values when invoking `Session.execute()`.

As an example, given an ORM mapping that includes a “timestamp” column:

    import datetime

    class LogRecord(Base):
        __tablename__ = "log_record"
        id: Mapped[int] = mapped_column(primary_key=True)
        message: Mapped[str]
        code: Mapped[str]
        timestamp: Mapped[datetime.datetime]

If we wanted to INSERT a series of `LogRecord` elements, each with a unique `message` field, however we would like to apply the SQL function `now()` to all rows, we can pass `timestamp` within `Insert.values()` and then pass the additional records using “bulk” mode:

    >>> from sqlalchemy import func
    >>> log_record_result = session.scalars(
    ...     insert(LogRecord).values(code="SQLA", timestamp=func.now()).returning(LogRecord),
    ...     [
    ...         {"message": "log message #1"},
    ...         {"message": "log message #2"},
    ...         {"message": "log message #3"},
    ...         {"message": "log message #4"},
    ...     ],
    ... )
    INSERT INTO log_record (message, code, timestamp)
    VALUES (?, ?, CURRENT_TIMESTAMP), (?, ?, CURRENT_TIMESTAMP),
    (?, ?, CURRENT_TIMESTAMP), (?, ?, CURRENT_TIMESTAMP)
    RETURNING id, message, code, timestamp
    [... (insertmanyvalues) 1/1 (unordered)] ('log message #1', 'SQLA', 'log message #2',
    'SQLA', 'log message #3', 'SQLA', 'log message #4', 'SQLA')
    >>> print(log_record_result.all())
    [LogRecord('log message #1', 'SQLA', datetime.datetime(...)),
     LogRecord('log message #2', 'SQLA', datetime.datetime(...)),
     LogRecord('log message #3', 'SQLA', datetime.datetime(...)),
     LogRecord('log message #4', 'SQLA', datetime.datetime(...))]

#### ORM Bulk Insert with Per Row SQL Expressions

The `Insert.values()` method itself accommodates a list of parameter dictionaries directly. When using the `Insert` construct in this way, without passing any list of parameter dictionaries to the `Session.execute.params` parameter, bulk ORM insert mode is not used, and instead the INSERT statement is rendered exactly as given and invoked exactly once. This mode of operation may be useful both for the case of passing SQL expressions on a per-row basis, and is also used when using “upsert” statements with the ORM, documented later in this chapter at ORM “upsert” Statements.

A contrived example of an INSERT that embeds per-row SQL expressions, and also demonstrates `Insert.returning()` in this form, is below:

    >>> from sqlalchemy import select
    >>> address_result = session.scalars(
    ...     insert(Address)
    ...     .values(
    ...         [
    ...             {
    ...                 "user_id": select(User.id).where(User.name == "sandy"),
    ...                 "email_address": "sandy@company.com",
    ...             },
    ...             {
    ...                 "user_id": select(User.id).where(User.name == "spongebob"),
    ...                 "email_address": "spongebob@company.com",
    ...             },
    ...             {
    ...                 "user_id": select(User.id).where(User.name == "patrick"),
    ...                 "email_address": "patrick@company.com",
    ...             },
    ...         ]
    ...     )
    ...     .returning(Address),
    ... )
    INSERT INTO address (user_id, email_address) VALUES
    ((SELECT user_account.id
    FROM user_account
    WHERE user_account.name = ?), ?), ((SELECT user_account.id
    FROM user_account
    WHERE user_account.name = ?), ?), ((SELECT user_account.id
    FROM user_account
    WHERE user_account.name = ?), ?) RETURNING id, user_id, email_address
    [...] ('sandy', 'sandy@company.com', 'spongebob', 'spongebob@company.com',
    'patrick', 'patrick@company.com')
    >>> print(address_result.all())
    [Address(email_address='sandy@company.com'),
     Address(email_address='spongebob@company.com'),
     Address(email_address='patrick@company.com')]

Because bulk ORM insert mode is not used above, the following features are not present:

- Joined table inheritance or other multi-table mappings are not supported, since that would require multiple INSERT statements.

- Heterogeneous parameter sets are not supported - each element in the VALUES set must have the same columns.

- Core-level scale optimizations such as the batching provided by insertmanyvalues are not available; statements will need to ensure the total number of parameters does not exceed limits imposed by the backing database.

For the above reasons, it is generally not recommended to use multiple parameter sets with `Insert.values()` with ORM INSERT statements unless there is a clear rationale, which is either that “upsert” is being used or there is a need to embed per-row SQL expressions in each parameter set.

See also

ORM “upsert” Statements

### Legacy Session Bulk INSERT Methods

The `Session` includes legacy methods for performing “bulk” INSERT and UPDATE statements. These methods share implementations with the SQLAlchemy 2.0 versions of these features, described at ORM Bulk INSERT Statements and ORM Bulk UPDATE by Primary Key, however lack many features, namely RETURNING support as well as support for session-synchronization.

Code which makes use of `Session.bulk_insert_mappings()` for example can port code as follows, starting with this mappings example:

    session.bulk_insert_mappings(User, [{"name": "u1"}, {"name": "u2"}, {"name": "u3"}])

The above is expressed using the new API as:

    from sqlalchemy import insert

    session.execute(insert(User), [{"name": "u1"}, {"name": "u2"}, {"name": "u3"}])

See also

Legacy Session Bulk UPDATE Methods

### ORM “upsert” Statements

Selected backends with SQLAlchemy may include dialect-specific `Insert` constructs which additionally have the ability to perform “upserts”, or INSERTs where an existing row in the parameter set is turned into an approximation of an UPDATE statement instead. By “existing row” , this may mean rows which share the same primary key value, or may refer to other indexed columns within the row that are considered to be unique; this is dependent on the capabilities of the backend in use.

The dialects included with SQLAlchemy that include dialect-specific “upsert” API features are:

- SQLite - using `Insert` documented at INSERT…ON CONFLICT (Upsert)

- PostgreSQL - using `Insert` documented at INSERT…ON CONFLICT (Upsert)

- MySQL/MariaDB - using `Insert` documented at INSERT…ON DUPLICATE KEY UPDATE (Upsert)

Users should review the above sections for background on proper construction of these objects; in particular, the “upsert” method typically needs to refer back to the original statement, so the statement is usually constructed in two separate steps.

Third party backends such as those mentioned at External Dialects may also feature similar constructs.

While SQLAlchemy does not yet have a backend-agnostic upsert construct, the above `Insert` variants are nonetheless ORM compatible in that they may be used in the same way as the `Insert` construct itself as documented at ORM Bulk Insert with Per Row SQL Expressions, that is, by embedding the desired rows to INSERT within the `Insert.values()` method. In the example below, the SQLite `insert()` function is used to generate an `Insert` construct that includes “ON CONFLICT DO UPDATE” support. The statement is then passed to `Session.execute()` where it proceeds normally, with the additional characteristic that the parameter dictionaries passed to `Insert.values()` are interpreted as ORM mapped attribute keys, rather than column names:

    >>> from sqlalchemy.dialects.sqlite import insert as sqlite_upsert
    >>> stmt = sqlite_upsert(User).values(
    ...     [
    ...         {"name": "spongebob", "fullname": "Spongebob Squarepants"},
    ...         {"name": "sandy", "fullname": "Sandy Cheeks"},
    ...         {"name": "patrick", "fullname": "Patrick Star"},
    ...         {"name": "squidward", "fullname": "Squidward Tentacles"},
    ...         {"name": "ehkrabs", "fullname": "Eugene H. Krabs"},
    ...     ]
    ... )
    >>> stmt = stmt.on_conflict_do_update(
    ...     index_elements=[User.name], set_=dict(fullname=stmt.excluded.fullname)
    ... )
    >>> session.execute(stmt)
    INSERT INTO user_account (name, fullname)
    VALUES (?, ?), (?, ?), (?, ?), (?, ?), (?, ?)
    ON CONFLICT (name) DO UPDATE SET fullname = excluded.fullname
    [...] ('spongebob', 'Spongebob Squarepants', 'sandy', 'Sandy Cheeks',
    'patrick', 'Patrick Star', 'squidward', 'Squidward Tentacles',
    'ehkrabs', 'Eugene H. Krabs')
    <...>

#### Using RETURNING with upsert statements

From the SQLAlchemy ORM’s point of view, upsert statements look like regular `Insert` constructs, which includes that `Insert.returning()` works with upsert statements in the same way as was demonstrated at ORM Bulk Insert with Per Row SQL Expressions, so that any column expression or relevant ORM entity class may be passed. Continuing from the example in the previous section:

    >>> result = session.scalars(
    ...     stmt.returning(User), execution_options={"populate_existing": True}
    ... )
    INSERT INTO user_account (name, fullname)
    VALUES (?, ?), (?, ?), (?, ?), (?, ?), (?, ?)
    ON CONFLICT (name) DO UPDATE SET fullname = excluded.fullname
    RETURNING id, name, fullname, species
    [...] ('spongebob', 'Spongebob Squarepants', 'sandy', 'Sandy Cheeks',
    'patrick', 'Patrick Star', 'squidward', 'Squidward Tentacles',
    'ehkrabs', 'Eugene H. Krabs')
    >>> print(result.all())
    [User(name='spongebob', fullname='Spongebob Squarepants'),
      User(name='sandy', fullname='Sandy Cheeks'),
      User(name='patrick', fullname='Patrick Star'),
      User(name='squidward', fullname='Squidward Tentacles'),
      User(name='ehkrabs', fullname='Eugene H. Krabs')]

The example above uses RETURNING to return ORM objects for each row inserted or upserted by the statement. The example also adds use of the Populate Existing execution option. This option indicates that `User` objects which are already present in the `Session` for rows that already exist should be refreshed with the data from the new row. For a pure `Insert` statement, this option is not significant, because every row produced is a brand new primary key identity. However when the `Insert` also includes “upsert” options, it may also be yielding results from rows that already exist and therefore may already have a primary key identity represented in the `Session` object’s identity map.

See also

Populate Existing

## ORM Bulk UPDATE by Primary Key

The `Update` construct may be used with `Session.execute()` in a similar way as the `Insert` statement is used as described at ORM Bulk INSERT Statements, passing a list of many parameter dictionaries, each dictionary representing an individual row that corresponds to a single primary key value. This use should not be confused with a more common way to use `Update` statements with the ORM, using an explicit WHERE clause, which is documented at ORM UPDATE and DELETE with Custom WHERE Criteria.

For the “bulk” version of UPDATE, a `update()` construct is made in terms of an ORM class and passed to the `Session.execute()` method; the resulting `Update` object should have no values and typically no WHERE criteria, that is, the `Update.values()` method is not used, and the `Update.where()` is usually not used, but may be used in the unusual case that additional filtering criteria would be added.

Passing the `Update` construct along with a list of parameter dictionaries which each include a full primary key value will invoke bulk UPDATE by primary key mode for the statement, generating the appropriate WHERE criteria to match each row by primary key, and using executemany to run each parameter set against the UPDATE statement:

    >>> from sqlalchemy import update
    >>> session.execute(
    ...     update(User),
    ...     [
    ...         {"id": 1, "fullname": "Spongebob Squarepants"},
    ...         {"id": 3, "fullname": "Patrick Star"},
    ...         {"id": 5, "fullname": "Eugene H. Krabs"},
    ...     ],
    ... )
    UPDATE user_account SET fullname=? WHERE user_account.id = ?
    [...] [('Spongebob Squarepants', 1), ('Patrick Star', 3), ('Eugene H. Krabs', 5)]
    <...>

Note that each parameter dictionary must include a full primary key for each record, else an error is raised.

Like the bulk INSERT feature, heterogeneous parameter lists are supported here as well, where the parameters will be grouped into sub-batches of UPDATE runs.

Changed in version 2.0.11: Additional WHERE criteria can be combined with ORM Bulk UPDATE by Primary Key by using the `Update.where()` method to add additional criteria. However this criteria is always in addition to the WHERE criteria that’s already made present which includes primary key values.

The RETURNING feature is not available when using the “bulk UPDATE by primary key” feature; the list of multiple parameter dictionaries necessarily makes use of DBAPI executemany, which in its usual form does not typically support result rows.

Changed in version 2.0: Passing an `Update` construct to the `Session.execute()` method along with a list of parameter dictionaries now invokes a “bulk update”, which makes use of the same functionality as the legacy `Session.bulk_update_mappings()` method. This is a behavior change compared to the 1.x series where the `Update` would only be supported with explicit WHERE criteria and inline VALUES.

### Disabling Bulk ORM Update by Primary Key for an UPDATE statement with multiple parameter sets

The ORM Bulk Update by Primary Key feature, which runs an UPDATE statement per record which includes WHERE criteria for each primary key value, is automatically used when:

1. the UPDATE statement given is against an ORM entity

2. the `Session` is used to execute the statement, and not a Core `Connection`

3. The parameters passed are a list of dictionaries.

In order to invoke an UPDATE statement without using “ORM Bulk Update by Primary Key”, invoke the statement against the `Connection` directly using the `Session.connection()` method to acquire the current `Connection` for the transaction:

    >>> from sqlalchemy import bindparam
    >>> session.connection().execute(
    ...     update(User).where(User.name == bindparam("u_name")),
    ...     [
    ...         {"u_name": "spongebob", "fullname": "Spongebob Squarepants"},
    ...         {"u_name": "patrick", "fullname": "Patrick Star"},
    ...     ],
    ... )
    UPDATE user_account SET fullname=? WHERE user_account.name = ?
    [...] [('Spongebob Squarepants', 'spongebob'), ('Patrick Star', 'patrick')]
    <...>

See also

per-row ORM Bulk Update by Primary Key requires that records contain primary key values

### Bulk UPDATE by Primary Key for Joined Table Inheritance

ORM bulk update has similar behavior to ORM bulk insert when using mappings with joined table inheritance; as described at Bulk INSERT for Joined Table Inheritance, the bulk UPDATE operation will emit an UPDATE statement for each table represented in the mapping, for which the given parameters include values to be updated (non-affected tables are skipped).

Example:

    >>> session.execute(
    ...     update(Manager),
    ...     [
    ...         {
    ...             "id": 1,
    ...             "name": "scheeks",
    ...             "manager_name": "Sandy Cheeks, President",
    ...         },
    ...         {
    ...             "id": 2,
    ...             "name": "eugene",
    ...             "manager_name": "Eugene H. Krabs, VP Marketing",
    ...         },
    ...     ],
    ... )
    UPDATE employee SET name=? WHERE employee.id = ?
    [...] [('scheeks', 1), ('eugene', 2)]
    UPDATE manager SET manager_name=? WHERE manager.id = ?
    [...] [('Sandy Cheeks, President', 1), ('Eugene H. Krabs, VP Marketing', 2)]
    <...>

### Legacy Session Bulk UPDATE Methods

As discussed at Legacy Session Bulk INSERT Methods, the `Session.bulk_update_mappings()` method of `Session` is the legacy form of bulk update, which the ORM makes use of internally when interpreting a `update()` statement with primary key parameters given; however, when using the legacy version, features such as support for session-synchronization are not included.

The example below:

    session.bulk_update_mappings(
        User,
        [
            {"id": 1, "name": "scheeks", "manager_name": "Sandy Cheeks, President"},
            {"id": 2, "name": "eugene", "manager_name": "Eugene H. Krabs, VP Marketing"},
        ],
    )

Is expressed using the new API as:

    from sqlalchemy import update

    session.execute(
        update(User),
        [
            {"id": 1, "name": "scheeks", "manager_name": "Sandy Cheeks, President"},
            {"id": 2, "name": "eugene", "manager_name": "Eugene H. Krabs, VP Marketing"},
        ],
    )

See also

Legacy Session Bulk INSERT Methods

## ORM UPDATE and DELETE with Custom WHERE Criteria

The `Update` and `Delete` constructs, when constructed with custom WHERE criteria (that is, using the `Update.where()` and `Delete.where()` methods), may be invoked in an ORM context by passing them to `Session.execute()`, without using the `Session.execute.params` parameter. For `Update`, the values to be updated should be passed using `Update.values()`.

This mode of use differs from the feature described previously at ORM Bulk UPDATE by Primary Key in that the ORM uses the given WHERE clause as is, rather than fixing the WHERE clause to be by primary key. This means that the single UPDATE or DELETE statement can affect many rows at once.

As an example, below an UPDATE is emitted that affects the “fullname” field of multiple rows

    >>> from sqlalchemy import update
    >>> stmt = (
    ...     update(User)
    ...     .where(User.name.in_(["squidward", "sandy"]))
    ...     .values(fullname="Name starts with S")
    ... )
    >>> session.execute(stmt)
    UPDATE user_account SET fullname=? WHERE user_account.name IN (?, ?)
    [...] ('Name starts with S', 'squidward', 'sandy')
    <...>

For a DELETE, an example of deleting rows based on criteria:

    >>> from sqlalchemy import delete
    >>> stmt = delete(User).where(User.name.in_(["squidward", "sandy"]))
    >>> session.execute(stmt)
    DELETE FROM user_account WHERE user_account.name IN (?, ?)
    [...] ('squidward', 'sandy')
    <...>

Warning

Please read the following section Important Notes and Caveats for ORM-Enabled Update and Delete for important notes regarding how the functionality of ORM-Enabled UPDATE and DELETE diverges from that of ORM unit of work features, such as using the `Session.delete()` method to delete individual objects.

### Important Notes and Caveats for ORM-Enabled Update and Delete

The ORM-enabled UPDATE and DELETE features bypass ORM unit of work automation in favor of being able to emit a single UPDATE or DELETE statement that matches multiple rows at once without complexity.

- The operations do not offer in-Python cascading of relationships - it is assumed that ON UPDATE CASCADE and/or ON DELETE CASCADE is configured for any foreign key references which require it, otherwise the database may emit an integrity violation if foreign key references are being enforced. See the notes at Using foreign key ON DELETE cascade with ORM relationships for some examples.

- After the UPDATE or DELETE, dependent objects in the `Session` which were impacted by an ON UPDATE CASCADE or ON DELETE CASCADE on related tables, particularly objects that refer to rows that have now been deleted, may still reference those objects. This issue is resolved once the `Session` is expired, which normally occurs upon `Session.commit()` or can be forced by using `Session.expire_all()`.

- ORM-enabled UPDATEs and DELETEs do not handle joined table inheritance automatically. See the section UPDATE/DELETE with Custom WHERE Criteria for Joined Table Inheritance for notes on how to work with joined-inheritance mappings.

- The WHERE criteria needed in order to limit the polymorphic identity to specific subclasses for single-table-inheritance mappings is included automatically . This only applies to a subclass mapper that has no table of its own.

- The `with_loader_criteria()` option is supported by ORM update and delete operations; criteria here will be added to that of the UPDATE or DELETE statement being emitted, as well as taken into account during the “synchronize” process.

- In order to intercept ORM-enabled UPDATE and DELETE operations with event handlers, use the `SessionEvents.do_orm_execute()` event.

### Selecting a Synchronization Strategy

When making use of `update()` or `delete()` in conjunction with ORM-enabled execution using `Session.execute()`, additional ORM-specific functionality is present which will synchronize the state being changed by the statement with that of the objects that are currently present within the identity map of the `Session`. By “synchronize” we mean that UPDATEd attributes will be refreshed with the new value, or at the very least expired so that they will re-populate with their new value on next access, and DELETEd objects will be moved into the deleted state.

This synchronization is controllable as the “synchronization strategy”, which is passed as an string ORM execution option, typically by using the `Session.execute.execution_options` dictionary:

    >>> from sqlalchemy import update
    >>> stmt = (
    ...     update(User).where(User.name == "squidward").values(fullname="Squidward Tentacles")
    ... )
    >>> session.execute(stmt, execution_options={"synchronize_session": False})
    UPDATE user_account SET fullname=? WHERE user_account.name = ?
    [...] ('Squidward Tentacles', 'squidward')
    <...>

The execution option may also be bundled with the statement itself using the `Executable.execution_options()` method:

    >>> from sqlalchemy import update
    >>> stmt = (
    ...     update(User)
    ...     .where(User.name == "squidward")
    ...     .values(fullname="Squidward Tentacles")
    ...     .execution_options(synchronize_session=False)
    ... )
    >>> session.execute(stmt)
    UPDATE user_account SET fullname=? WHERE user_account.name = ?
    [...] ('Squidward Tentacles', 'squidward')
    <...>

The following values for `synchronize_session` are supported:

- `'auto'` - this is the default. The `'fetch'` strategy will be used on backends that support RETURNING, which includes all SQLAlchemy-native drivers except for MySQL. If RETURNING is not supported, the `'evaluate'` strategy will be used instead.

- `'fetch'` - Retrieves the primary key identity of affected rows by either performing a SELECT before the UPDATE or DELETE, or by using RETURNING if the database supports it, so that in-memory objects which are affected by the operation can be refreshed with new values (updates) or expunged from the `Session` (deletes). This synchronization strategy may be used even if the given `update()` or `delete()` construct explicitly specifies entities or columns using `UpdateBase.returning()`.

  Changed in version 2.0: Explicit `UpdateBase.returning()` may be combined with the `'fetch'` synchronization strategy when using ORM-enabled UPDATE and DELETE with WHERE criteria. The actual statement will contain the union of columns between that which the `'fetch'` strategy requires and those which were requested.

- `'evaluate'` - This indicates to evaluate the WHERE criteria given in the UPDATE or DELETE statement in Python, to locate matching objects within the `Session`. This approach does not add any SQL round trips to the operation, and in the absence of RETURNING support, may be more efficient. For UPDATE or DELETE statements with complex criteria, the `'evaluate'` strategy may not be able to evaluate the expression in Python and will raise an error. If this occurs, use the `'fetch'` strategy for the operation instead.

  Tip

  If a SQL expression makes use of custom operators using the `Operators.op()` or `custom_op` feature, the `Operators.op.python_impl` parameter may be used to indicate a Python function that will be used by the `"evaluate"` synchronization strategy.

  Added in version 2.0.

  Warning

  The `"evaluate"` strategy should be avoided if an UPDATE operation is to run on a `Session` that has many objects which have been expired, because it will necessarily need to refresh objects in order to test them against the given WHERE criteria, which will emit a SELECT for each one. In this case, and particularly if the backend supports RETURNING, the `"fetch"` strategy should be preferred.

- `False` - don’t synchronize the session. This option may be useful for backends that don’t support RETURNING where the `"evaluate"` strategy is not able to be used. In this case, the state of objects in the `Session` is unchanged and will not automatically correspond to the UPDATE or DELETE statement that was emitted, if such objects that would normally correspond to the rows matched are present.

### Using RETURNING with UPDATE/DELETE and Custom WHERE Criteria

The `UpdateBase.returning()` method is fully compatible with ORM-enabled UPDATE and DELETE with WHERE criteria. Full ORM objects and/or columns may be indicated for RETURNING:

    >>> from sqlalchemy import update
    >>> stmt = (
    ...     update(User)
    ...     .where(User.name == "squidward")
    ...     .values(fullname="Squidward Tentacles")
    ...     .returning(User)
    ... )
    >>> result = session.scalars(stmt)
    UPDATE user_account SET fullname=? WHERE user_account.name = ?
    RETURNING id, name, fullname, species
    [...] ('Squidward Tentacles', 'squidward')
    >>> print(result.all())
    [User(name='squidward', fullname='Squidward Tentacles')]

The support for RETURNING is also compatible with the `fetch` synchronization strategy, which also uses RETURNING. The ORM will organize the columns in RETURNING appropriately so that the synchronization proceeds as well as that the returned `Result` will contain the requested entities and SQL columns in their requested order.

Added in version 2.0: `UpdateBase.returning()` may be used for ORM enabled UPDATE and DELETE while still retaining full compatibility with the `fetch` synchronization strategy.

### UPDATE/DELETE with Custom WHERE Criteria for Joined Table Inheritance

The UPDATE/DELETE with WHERE criteria feature, unlike the ORM Bulk UPDATE by Primary Key, only emits a single UPDATE or DELETE statement per call to `Session.execute()`. This means that when running an `update()` or `delete()` statement against a multi-table mapping, such as a subclass in a joined-table inheritance mapping, the statement must conform to the backend’s current capabilities, which may include that the backend does not support an UPDATE or DELETE statement that refers to multiple tables, or may have only limited support for this. This means that for mappings such as joined inheritance subclasses, the ORM version of the UPDATE/DELETE with WHERE criteria feature can only be used to a limited extent or not at all, depending on specifics.

The most straightforward way to emit a multi-row UPDATE statement for a joined-table subclass is to refer to the sub-table alone. This means the `Update()` construct should only refer to attributes that are local to the subclass table, as in the example below:

    >>> stmt = (
    ...     update(Manager)
    ...     .where(Manager.id == 1)
    ...     .values(manager_name="Sandy Cheeks, President")
    ... )
    >>> session.execute(stmt)
    UPDATE manager SET manager_name=? WHERE manager.id = ?
    [...] ('Sandy Cheeks, President', 1)
    <...>

With the above form, a rudimentary way to refer to the base table in order to locate rows which will work on any SQL backend is so use a subquery:

    >>> stmt = (
    ...     update(Manager)
    ...     .where(
    ...         Manager.id
    ...         == select(Employee.id).where(Employee.name == "sandy").scalar_subquery()
    ...     )
    ...     .values(manager_name="Sandy Cheeks, President")
    ... )
    >>> session.execute(stmt)
    UPDATE manager SET manager_name=? WHERE manager.id = (SELECT employee.id
    FROM employee
    WHERE employee.name = ?) RETURNING id
    [...] ('Sandy Cheeks, President', 'sandy')
    <...>

For backends that support UPDATE…FROM, the subquery may be stated instead as additional plain WHERE criteria, however the criteria between the two tables must be stated explicitly in some way:

    >>> stmt = (
    ...     update(Manager)
    ...     .where(Manager.id == Employee.id, Employee.name == "sandy")
    ...     .values(manager_name="Sandy Cheeks, President")
    ... )
    >>> session.execute(stmt)
    UPDATE manager SET manager_name=? FROM employee
    WHERE manager.id = employee.id AND employee.name = ?
    [...] ('Sandy Cheeks, President', 'sandy')
    <...>

For a DELETE, it’s expected that rows in both the base table and the sub-table would be DELETEd at the same time. To DELETE many rows of joined inheritance objects without using cascading foreign keys, emit DELETE for each table individually:

    >>> from sqlalchemy import delete
    >>> session.execute(delete(Manager).where(Manager.id == 1))
    DELETE FROM manager WHERE manager.id = ?
    [...] (1,)
    <...>
    >>> session.execute(delete(Employee).where(Employee.id == 1))
    DELETE FROM employee WHERE employee.id = ?
    [...] (1,)
    <...>

Overall, normal unit of work processes should be preferred for updating and deleting rows for joined inheritance and other multi-table mappings, unless there is a performance rationale for using custom WHERE criteria.

### Legacy Query Methods

The ORM enabled UPDATE/DELETE with WHERE feature was originally part of the now-legacy `Query` object, in the `Query.update()` and `Query.delete()` methods. These methods remain available and provide a subset of the same functionality as that described at ORM UPDATE and DELETE with Custom WHERE Criteria. The primary difference is that the legacy methods don’t provide for explicit RETURNING support.

See also

`Query.update()`

`Query.delete()`

ORM Querying Guide

Next Query Guide Section: Column Loading Options