Class ATrace2D

Method Details

• getInstanceCount

  public static int getInstanceCount()

  Returns the instanceCount for all ATrace2D subclasses.

  Returns:

  Returns the instanceCount for all ATrace2D subclasses.

• addComputingTrace

  public void addComputingTrace(ITrace2D trace)

  Description copied from interface: ITrace2D

  Adds a trace that "should" compute values from the points added via ITrace2D.addPoint(ITracePoint2D) .

  The given trace will be informed in case an add operation on this trace succeeds via ITrace2D.addPoint(ITracePoint2D).

  Specified by:

  addComputingTrace in interface ITrace2D

  Parameters:

  trace - the trace that will calculate it's points from the added points of this trace.

  See Also:

  • ITrace2D.addComputingTrace(info.monitorenter.gui.chart.ITrace2D)

• ensureInitialized

  protected final void ensureInitialized()

  Ensures that no deadlock due to a missing internal chart reference may occur.

  Throws:

  IllegalStateException - if this trace is not assigned to a chart.

• addErrorBarPolicy

  public final boolean addErrorBarPolicy(IErrorBarPolicy<?> errorBarPolicy)

  Description copied from interface: ITrace2D

  Adds the given error bar policy to the internal set of error bar policies.

  It will be the last error bar policy to render (most forward on screen).

  Specified by:

  addErrorBarPolicy in interface ITrace2D

  Parameters:

  errorBarPolicy - the error bar policy to add for rendering this trace's error bars.

  Returns:

  true if the painter was added (same instance was not contained before).

  See Also:

  • ITrace2D.addErrorBarPolicy(info.monitorenter.gui.chart.IErrorBarPolicy)

• addPoint

  public final boolean addPoint(double x, double y)

  Description copied from interface: ITrace2D

  Adds a trace point to the internal data.

  Warning:
  Do not call this method before this trace has been added to a chart or you will not succeed as the chart is needed to get the proper Chart2D.getTracePointProvider().

  Specified by:

  addPoint in interface ITrace2D

  Parameters:

  x - the x-value of the point to add.

  y - the y-value of the point to add.

  Returns:

  true if the operation was successful, false else.

  See Also:

  • ITrace2D.addPoint(double, double)

• addPoint

  public final boolean addPoint(ITracePoint2D p)

  Add the given point to this ITrace2D.

  This implementation performs caching of minimum and maximum values for x and y and the delegates to addPointInternal(ITracePoint2D) that has to perform the "real" add operation.

  Property change events are fired as described in method firePointAdded(ITracePoint2D).

  Specified by:

  addPoint in interface ITrace2D

  Parameters:

  p - the TracePoint2D to add.

  Returns:

  true if the operation was successful, false else.

  See Also:

  • firePointChanged(ITracePoint2D, int)

• addPointHighlighter

  public boolean addPointHighlighter(IPointPainter<?> highlighter)

  Description copied from interface: ITrace2D

  Adds the given point painter to the internal set of point highlighters.

  It will be the last point painter to paint highlighting if highlighting is active.

  Specified by:

  addPointHighlighter in interface ITrace2D

  Parameters:

  highlighter - the highlighter to add for highlighting this trace.

  Returns:

  true if the highlighter was added (class of instance not contained before).

  See Also:

  • ITrace2D.addPointHighlighter(info.monitorenter.gui.chart.IPointPainter)

• addPointInternal

  protected abstract boolean addPointInternal(ITracePoint2D p)

  Override this template method for the custom add operation that depends on the policies of the implementation.

  No property change events have to be fired by default. If this method returns true the outer logic of the calling method addPoint(ITracePoint2D) will perform bound checks for the new point and fire property changes as described in method firePointChanged(ITracePoint2D, int).

  In special cases - when additional modifications to the internal set of points take place (e.g. a further point gets removed) this method should return false (regardless whether the new point was accepted or not) and perform bound checks and fire the property changes as mentioned above "manually".

  Parameters:

  p - the point to add.

  Returns:

  true if the given point was accepted or false if not.

• addPropertyChangeListener

  public final void addPropertyChangeListener(String propertyName, PropertyChangeListener listener)

  Description copied from interface: ITrace2D

  Registers a property change listener that will be informed about changes of the property identified by the given propertyName.

  Specified by:

  addPropertyChangeListener in interface ITrace2D

  Parameters:

  propertyName - the name of the property the listener is interested in

  listener - a listener that will only be informed if the property identified by the argument propertyName changes

  See Also:

  • ITrace2D.addPropertyChangeListener(java.lang.String, java.beans.PropertyChangeListener)

• addTracePainter

  public boolean addTracePainter(ITracePainter<?> painter)

  Description copied from interface: ITrace2D

  Adds the given trace painter to the internal set of trace painters.

  It will be the last painter to paint (most forward).

  Specified by:

  addTracePainter in interface ITrace2D

  Parameters:

  painter - the painter to add for rendering this trace.

  Returns:

  true if the painter was added (class of instance not contained before).

  See Also:

  • ITrace2D.addTracePainter(info.monitorenter.gui.chart.ITracePainter)

• compareTo

  public final int compareTo(ITrace2D o)

  Specified by:

  compareTo in interface Comparable<ITrace2D>

  Parameters:

  o - the trace to compare to.

  Returns:

  see interface.

  See Also:

  • Comparable.compareTo(java.lang.Object)

• containsTracePainter

  public boolean containsTracePainter(ITracePainter<?> painter)

  Description copied from interface: ITrace2D

  Returns true if the given painter is contained in this compound painter.

  Specified by:

  containsTracePainter in interface ITrace2D

  Parameters:

  painter - the painter to check whether it is contained.

  Returns:

  true if the given painter is contained in this compound painter.

  See Also:

  • ITrace2D.containsTracePainter(info.monitorenter.gui.chart.ITracePainter)

• finalize

  protected void finalize() throws Throwable

  Decreases internal instance count by one.

  Overrides:

  finalize in class Object

  Throws:

  Throwable - if something goes wrong.

• firePointAdded

  protected void firePointAdded(ITracePoint2D added)

  Fire property change events related to an added point.

  A property change event for property ITrace2D.PROPERTY_TRACEPOINT with null as the old value and the new point as the new value is fired. This allows e.g. rescaling of those instances (instead of having to rescale a whole trace).

  Additionally before this property change, property change events for bounds are fired as described in method firePointChanged(ITracePoint2D, int).

  Parameters:

  added - the point that was added.

• firePointChanged

  public void firePointChanged(ITracePoint2D changed, int state)

  Method triggered by ITracePoint2D.setLocation(double, double) , addPoint(ITracePoint2D) or removePoint(ITracePoint2D).

  Bound checks are performed and property change events for the properties ITrace2D.PROPERTY_MAX_X, ITrace2D.PROPERTY_MIN_X, ITrace2D.PROPERTY_MAX_Y and ITrace2D.PROPERTY_MIN_Y are fired if the add bounds have changed due to the modification of the point.

  If state is ITracePoint2D.STATE_CHANGED a property change event with ITrace2D.PROPERTY_POINT_CHANGED will be fired to all listeners.

  Specified by:

  firePointChanged in interface ITrace2D

  Parameters:

  changed - the point that has been changed which may be a newly added point (from addPoint(ITracePoint2D), a removed one or a modified one.

  state - one of {ITracePoint2D.STATE_ADDED, ITracePoint2D.STATE_CHANGED, ITracePoint2D.STATE_REMOVED to inform about the type of change.

• firePointRemoved

  protected void firePointRemoved(ITracePoint2D removed)

  Fire property change events related to a removed point.

  A property change event for property ITrace2D.PROPERTY_TRACEPOINT with a point as the old value and null as the new value is fired. This allows e.g. rescaling of those instances (instead of having to rescale a whole trace).

  Additionally before this property change, property change events for bounds are fired as described in method firePointChanged(ITracePoint2D, int).

  Parameters:

  removed - the point that was removed.

• firePropertyChange

  protected final void firePropertyChange(String property, Object oldvalue, Object newvalue)

  Fires a property change event to the registered listeners.

  Parameters:

  property - one of the PROPERTY_XXX constants defined in ITrace2D.

  oldvalue - the old value of the property.

  newvalue - the new value of the property.

• getChangeListeners

  public List<ChangeListener> getChangeListeners()

  Returns a shallow copied list of the change listeners of this instance.

  Returns:

  a shallow copied list of the change listeners of this instance.

• getColor

  public final Color getColor()

  Get the Color this trace will be painted with.

  Specified by:

  getColor in interface ITrace2D

  Returns:

  the Color of this instance

• getErrorBarPolicies

  public final Set<IErrorBarPolicy<?>> getErrorBarPolicies()

  Description copied from interface: ITrace2D

  Returns the Set<IErrorBarPolicy> that will be used to render error bars for this trace.

  Specified by:

  getErrorBarPolicies in interface ITrace2D

  Returns:

  the Set<IErrorBarPolicy> that will be used to render error bars for this trace.

  See Also:

  • ITrace2D.getErrorBarPolicies()

• getHasErrorBars

  public final boolean getHasErrorBars()

  Description copied from interface: ITrace2D

  Returns true if this trace has error bars configured.

  If this returns false, no error bars will be painted for this trace.

  Specified by:

  getHasErrorBars in interface ITrace2D

  Returns:

  true if this trace has error bars configured.

  See Also:

  • ITrace2D.getHasErrorBars()

• getLabel

  public final String getLabel()

  Returns a label for this trace.

  The label is constructed of

  • The name of this trace (getName()).
  • The physical unit of this trace (getPhysicalUnits()).

  Specified by:

  getLabel in interface ITrace2D

  Returns:

  a label for this trace.

  See Also:

  • ITrace2D.getLabel()
  • getName()
  • getPhysicalUnits()

• getMaxX

  public final double getMaxX()

  Returns the original maximum x- value ignoring the offsetX.

  Specified by:

  getMaxX in interface ITrace2D

  Returns:

  the original maximum x- value ignoring the offsetX.

• getMaxY

  public final double getMaxY()

  Returns the original maximum y- value ignoring the offsetY.

  Specified by:

  getMaxY in interface ITrace2D

  Returns:

  the original maximum y- value ignoring the offsetY.

• getMinX

  public final double getMinX()

  Returns the original minimum x- value ignoring the offsetX.

  Specified by:

  getMinX in interface ITrace2D

  Returns:

  the original minimum x- value ignoring the offsetX.

• getMinY

  public final double getMinY()

  Returns the original minimum y- value ignoring the offsetY.

  Specified by:

  getMinY in interface ITrace2D

  Returns:

  the original minimum y- value ignoring the offsetY.

• getName

  public final String getName()

  Returns the name of this trace.

  Specified by:

  getName in interface ITrace2D

  Returns:

  the name of this trace.

  See Also:

  • ITrace2D.getName()
  • setName(String s)

• getNearestPointEuclid

  public ITrace2D.DistancePoint getNearestPointEuclid(double x, double y)

  Naive implementation that iterates over every point.

  Subclasses that have more insight about their internal data storage could override this with a faster implementation (e.g. if the points are kept in a sorted order a skip - strategy) could find the minimum faster.

  Specified by:

  getNearestPointEuclid in interface ITrace2D

  Parameters:

  x - the x value as a normalized value between 0 and 1.0.

  y - the x value as a normalized value between 0 and 1.0.

  Returns:

  the nearest point to the given normalized value coordinates of this trace in Euclid distance.

  See Also:

  • ITrace2D.getNearestPointEuclid(double, double)

• getNearestPointManhattan

  public ITrace2D.DistancePoint getNearestPointManhattan(double x, double y)

  Naive implementation that iterates over every point.

  Subclasses that have more insight about their internal data storage could override this with a faster implementation (e.g. if the points are kept in a sorted order a skip - strategy could find the minimum faster.

  Specified by:

  getNearestPointManhattan in interface ITrace2D

  Parameters:

  x - the x value as a normalized value between 0 and 1.0.

  y - the x value as a normalized value between 0 and 1.0.

  Returns:

  the nearest point to the given normalized value coordinates of this trace in Manhattan distance.

  See Also:

  • ITrace2D.getNearestPointManhattan(double, double)

• getPhysicalUnits

  public final String getPhysicalUnits()

  Description copied from interface: ITrace2D

  Returns the concatenation [x: "ITrace2D.getPhysicalUnitsX()", y: " ITrace2D.getPhysicalUnitsY()"].

  Specified by:

  getPhysicalUnits in interface ITrace2D

  Returns:

  the concatenation [x: "ITrace2D.getPhysicalUnitsX()", y: " ITrace2D.getPhysicalUnitsY()"].

  See Also:

  • ITrace2D.getPhysicalUnits()

• getPhysicalUnitsX

  public final String getPhysicalUnitsX()

  Description copied from interface: ITrace2D

  Returns the physical unit string value for the x dimension.

  Specified by:

  getPhysicalUnitsX in interface ITrace2D

  Returns:

  the physical unit string value for the x dimension.

  See Also:

  • ITrace2D.getPhysicalUnitsX()

• getPhysicalUnitsY

  public final String getPhysicalUnitsY()

  Description copied from interface: ITrace2D

  Returns the physical unit string value for the y dimension.

  Specified by:

  getPhysicalUnitsY in interface ITrace2D

  Returns:

  the physical unit string value for the y dimension.

  See Also:

  • ITrace2D.getPhysicalUnitsY()

• getPointHighlighters

  public final Set<IPointPainter<?>> getPointHighlighters()

  Description copied from interface: ITrace2D

  Returns the Set<IPointPainter> that may be used to highlight points of this trace.

  This is used by the point highlighting feature: Chart2D.enablePointHighlighting(boolean)

  Specified by:

  getPointHighlighters in interface ITrace2D

  Returns:

  the Set<IPointPainter> that may be used to highlight points.

  See Also:

  • ITrace2D.getPointHighlighters()

• getPropertyChangeListeners

  public PropertyChangeListener[] getPropertyChangeListeners(String property)

  Description copied from interface: ITrace2D

  Returns all property change listeners for the given property.

  Specified by:

  getPropertyChangeListeners in interface ITrace2D

  Parameters:

  property - one of the constants with the PROPERTY_ prefix defined in this class or subclasses.

  Returns:

  the property change listeners for the given property.

  See Also:

  • ITrace2D.getPropertyChangeListeners(String)

• getRenderer

  public final Chart2D getRenderer()

  Returns the chart that renders this instance or null, if this trace is not added to a chart.

  The chart that renders this trace registers itself with this trace in Chart2D.addTrace(ITrace2D).

  Specified by:

  getRenderer in interface ITrace2D

  Returns:

  Returns the renderer.

  See Also:

  • Chart2D.addTrace(ITrace2D)

• getStroke

  public final Stroke getStroke()

  Get the Stroke object this instance will be painted with.

  Specified by:

  getStroke in interface ITrace2D

  Returns:

  the Stroke object this ITrace2D will be painted with.

  See Also:

  • ITrace2D.getStroke()

• getTracePainters

  public final Set<ITracePainter<?>> getTracePainters()

  Description copied from interface: ITrace2D

  Returns the Set<ITracePainter> that will be used to paint this trace.

  The original set should be returned by contract to allow adding painters "silently" (vs. using ITrace2D.addTracePainter(ITracePainter)).

  Specified by:

  getTracePainters in interface ITrace2D

  Returns:

  the Set<ITracePainter> that will be used to paint this trace.

  See Also:

  • ITrace2D.getTracePainters()

• getZIndex

  public final Integer getZIndex()

  Description copied from interface: ITrace2D

  The z-index defines the order in which this instance will be painted.

  A higher value will bring it more "to the front".

  Specified by:

  getZIndex in interface ITrace2D

  Returns:

  the z-index that will define the order in which this instance will be painted.

  See Also:

  • ITrace2D.getZIndex()

• isVisible

  public final boolean isVisible()

  Description copied from interface: ITrace2D

  Returns true if this instance should be rendered.

  Specified by:

  isVisible in interface ITrace2D

  Returns:

  true if this instance should be rendered.

  See Also:

  • ITrace2D.isVisible()

• maxXSearch

  protected void maxXSearch()

  Internal search for the maximum x value that is only invoked if no cached value is at hand or bounds have changed by adding new points.

  The result is assigned to the property maxX.

  See Also:

  • getMaxX()

• maxYSearch

  protected void maxYSearch()

  Internal search for the maximum y value that is only invoked if no cached value is at hand or bounds have changed by adding new points.

  The result is assigned to the property maxY.

  See Also:

  • getMaxY()

• minXSearch

  protected void minXSearch()

  Internal search for the minimum x value that is only invoked if no cached value is at hand or bounds have changed by adding new points.

  The result is assigned to the property minX.

  See Also:

  • getMinX()

• minYSearch

  protected void minYSearch()

  Internal search for the minimum y value that is only invoked if no cached value is at hand or bounds have changed by adding new points.

  The result is assigned to the property minY.

  See Also:

  • getMinY()

• propertyChange

  public void propertyChange(PropertyChangeEvent evt)

  Specified by:

  propertyChange in interface PropertyChangeListener

  See Also:

  • PropertyChangeListener.propertyChange(java.beans.PropertyChangeEvent)

• removeAllPointHighlighters

  public Set<IPointPainter<?>> removeAllPointHighlighters()

  Description copied from interface: ITrace2D

  Clears all internal point highlighters used.

  Returns the Set<IPointPainter> that was used to highlight points.

  This is used by the point highlighting feature: Chart2D.enablePointHighlighting(boolean)

  Specified by:

  removeAllPointHighlighters in interface ITrace2D

  Returns:

  the Set<IPointPainter> that was be used to highlight points.

  See Also:

  • ITrace2D.removeAllPointHighlighters()

• removeAllPoints

  public final void removeAllPoints()

  Changes the internal state to empty to allow that the caching of bounds is cleared and delegates the call to removeAllPointsInternal().

  Specified by:

  removeAllPoints in interface ITrace2D

  See Also:

  • ITrace2D.removeAllPoints()

• removeAllPointsInternal

  protected abstract void removeAllPointsInternal()

  Override this template method for the custom remove operation that depends on the Collection used in the implementation.

  No change events have to be fired, this is done by ATrace2D.

• removeComputingTrace

  public boolean removeComputingTrace(ITrace2D trace)

  Description copied from interface: ITrace2D

  Remove a trace that "should" compute values from the points added via ITrace2D.addPoint(ITracePoint2D).

  Specified by:

  removeComputingTrace in interface ITrace2D

  Parameters:

  trace - the trace that will calculate it's points from the added points of this trace.

  Returns:

  true if the given trace was removed (recognized by the means of Object.equals(Object)).

  See Also:

  • ITrace2D.removeComputingTrace(info.monitorenter.gui.chart.ITrace2D)

• removeErrorBarPolicy

  public boolean removeErrorBarPolicy(IErrorBarPolicy<?> errorBarPolicy)

  Description copied from interface: ITrace2D

  Removes the given error bar policy from the internal set of error bar policies.

  Specified by:

  removeErrorBarPolicy in interface ITrace2D

  Parameters:

  errorBarPolicy - the error bar policy to remove.

  Returns:

  true if the painter was removed (same instance contained before).

  See Also:

  • ITrace2D.removeErrorBarPolicy(info.monitorenter.gui.chart.IErrorBarPolicy)

• removePoint

  public boolean removePoint(ITracePoint2D point)

  Remove the given point from this ITrace2D.

  This implementation performs caching of minimum and maximum values for x and y and the delegates to removePointInternal(ITracePoint2D) that has to perform the "real" add remove operation.

  Property change events are fired as described in method firePointRemoved(ITracePoint2D).

  Specified by:

  removePoint in interface ITrace2D

  Parameters:

  point - the TracePoint2D to remove.

  Returns:

  true if the removal succeeded, false else: this could be that the given point was not contained.

  See Also:

  • firePointChanged(ITracePoint2D, int)

• removePointHighlighter

  public boolean removePointHighlighter(IPointPainter<?> higlighter)

  Description copied from interface: ITrace2D

  Removes the given point highlighter, if it's class is contained.

  Specified by:

  removePointHighlighter in interface ITrace2D

  Parameters:

  higlighter - the highlighter to remove.

  Returns:

  true if a point highlighter of the class of the given argument was removed.

  See Also:

  • ITrace2D.removePointHighlighter(info.monitorenter.gui.chart.IPointPainter)

• removePointInternal

  protected abstract ITracePoint2D removePointInternal(ITracePoint2D point)

  Override this template method for the custom remove operation that depends on the internal storage the implementation.

  The returned point may be the same as the given. But some "computing" traces like Trace2DArithmeticMean will internally delete a different point and return that one.

  No property change events have to be fired by default. If this method returns null the outer logic of the calling method removePoint(ITracePoint2D) will perform bound checks for the returned point and fire property changes for the properties ITrace2D.PROPERTY_MAX_X, ITrace2D.PROPERTY_MIN_X, ITrace2D.PROPERTY_MAX_Y and ITrace2D.PROPERTY_MIN_Y.

  In special cases - when additional modifications to the internal set of points take place (e.g. a further point get added) this method should return false (regardless whether the old point was really removed or not) and perform bound checks and fire the property changes as mentioned above "manually".

  Parameters:

  point - the point to remove.

  Returns:

  null if unsuccessful (and no events should be fired) or the point that actually was removed (in case different than the given one it should be somehow related to the given one).

• removePropertyChangeListener

  public void removePropertyChangeListener(PropertyChangeListener listener)

  Description copied from interface: ITrace2D

  Unregisters a property change listener that has been registered for listening on all properties.

  Specified by:

  removePropertyChangeListener in interface ITrace2D

  Parameters:

  listener - a listener that will only be informed if the property identified by the argument propertyName changes

  See Also:

  • ITrace2D.removePropertyChangeListener(java.beans.PropertyChangeListener)

• removePropertyChangeListener

  public void removePropertyChangeListener(String property, PropertyChangeListener listener)

  Description copied from interface: ITrace2D

  Removes a property change listener for listening on the given property.

  Specified by:

  removePropertyChangeListener in interface ITrace2D

  Parameters:

  property - one of the constants with the PROPERTY_ prefix defined in this class or subclasses.

  listener - the listener for this property change.

  See Also:

  • ITrace2D.removePropertyChangeListener(java.lang.String, java.beans.PropertyChangeListener)

• removeTracePainter

  public boolean removeTracePainter(ITracePainter<?> painter)

  Description copied from interface: ITrace2D

  Removes the given trace painter, if it's class is contained and if more painters are remaining.

  Specified by:

  removeTracePainter in interface ITrace2D

  Parameters:

  painter - the trace painter to remove.

  Returns:

  true if a trace painter of the class of the given argument was removed.

  See Also:

  • ITrace2D.removeTracePainter(info.monitorenter.gui.chart.ITracePainter)

• setColor

  public final void setColor(Color color)

  Set the Color this trace will be painted with.

  Specified by:

  setColor in interface ITrace2D

  Parameters:

  color - the Color this trace will be painted with.

• setErrorBarPolicy

  public final Set<IErrorBarPolicy<?>> setErrorBarPolicy(IErrorBarPolicy<?> errorBarPolicy)

  Description copied from interface: ITrace2D

  Replaces all internal error bar policies by the new one.

  Specified by:

  setErrorBarPolicy in interface ITrace2D

  Parameters:

  errorBarPolicy - the new sole painter to use.

  Returns:

  the Set<IErrorBarPolicy> that was used before.

  See Also:

  • ITrace2D.setErrorBarPolicy(info.monitorenter.gui.chart.IErrorBarPolicy)

• setName

  public final void setName(String name)

  Sets the descriptive name for this trace.

  If the given argument is null or consists of whitespaces only the lable for this trace might become invisible (depending on physical units set).

  Specified by:

  setName in interface ITrace2D

  Parameters:

  name - the descriptive name for this trace.

  See Also:

  • ITrace2D.setName(java.lang.String)

• setPhysicalUnits

  public final void setPhysicalUnits(String xunit, String yunit)

  Description copied from interface: ITrace2D

  Assigns a specific String representing the physical unit to the ITrace2D (e.g. Volt, Ohm, lux, ...) which will be displayed by the Chart2D

  Specified by:

  setPhysicalUnits in interface ITrace2D

  Parameters:

  xunit - the physical unit for the x axis.

  yunit - the physical unit for the y axis.

  See Also:

  • ITrace2D.setPhysicalUnits(String, String)

• setPointHighlighter

  public final Set<IPointPainter<?>> setPointHighlighter(IPointPainter<?> highlighter)

  Description copied from interface: ITrace2D

  Replaces all internal point highlighters by the new one.

  Specified by:

  setPointHighlighter in interface ITrace2D

  Parameters:

  highlighter - the new sole highlighter to use.

  Returns:

  the Set<IPointPainter> that was used before or null if nothing changed.

  See Also:

  • ITrace2D.setPointHighlighter(info.monitorenter.gui.chart.IPointPainter)

• setRenderer

  public final void setRenderer(Chart2D renderer)

  Allows the chart this instance is painted by to register itself.

  This is internally required for synchronization and re-ordering due to z-Index changes.

  Specified by:

  setRenderer in interface ITrace2D

  Parameters:

  renderer - the chart that paints this instance.

• setStroke

  public final void setStroke(Stroke stroke)

  Description copied from interface: ITrace2D

  Allows to specify the rendering of the ITrace2D. This Stroke will be assigned to the Graphics2D by the rendering Chart2D when painting this instance.

  Specified by:

  setStroke in interface ITrace2D

  Parameters:

  stroke - the stroke to use for painting this trace.

  See Also:

  • ITrace2D.setStroke(java.awt.Stroke)

• setTracePainter

  public final Set<ITracePainter<?>> setTracePainter(ITracePainter<?> painter)

  Description copied from interface: ITrace2D

  Replaces all internal trace painters by the new one.

  Specified by:

  setTracePainter in interface ITrace2D

  Parameters:

  painter - the new sole painter to use.

  Returns:

  the Set<ITracePainter> that was used before.

  See Also:

  • ITrace2D.setTracePainter(info.monitorenter.gui.chart.ITracePainter)

• setVisible

  public final void setVisible(boolean visible)

  Set the visible property of this instance.

  Invisible ITrace2D instances (visible == false) will not be painted.

  Specified by:

  setVisible in interface ITrace2D

  Parameters:

  visible - the visible property of this instance to set.

  See Also:

  • ITrace2D.setVisible(boolean)

• setZIndex

  public final void setZIndex(Integer zIndex)

  Description copied from interface: ITrace2D

  Sets the internal z-index property. This decides the order in which different traces within the same Chart2D are painted.

  The higher the given value is the more this trace will be brought to front.

  The value must not be lower than ITrace2D.Z_INDEX_MIN(0) and higher than ITrace2D.ZINDEX_MAX(100).

  This might not be tested for increased performance but ignoring these bounds may result in wrong ordering of display.

  Specified by:

  setZIndex in interface ITrace2D

  Parameters:

  zIndex - the z index of this trace - the lower the value the more in front the trace will appear amongst other traces in the same chart.

  See Also:

  • ITrace2D.setZIndex(java.lang.Integer)

• showsErrorBars

  public boolean showsErrorBars()

  Description copied from interface: ITrace2D

  Tests whether error bars are painted by this trace.

  Returns true if

  • this trace contains IErrorBarPolicy instances.
  • and at least one of these instances contains at least one IErrorBarPainter instance.

  Specified by:

  showsErrorBars in interface ITrace2D

  Returns:

  true if this trace renders error bars.

  See Also:

  • ITrace2D.showsErrorBars()

• showsNegativeXErrorBars

  public boolean showsNegativeXErrorBars()

  Description copied from interface: ITrace2D

  Tests whether error bars in negative x direction are painted by this trace.

  Returns true if

  • this trace contains at leaste one IErrorBarPolicy instance that IErrorBarPolicy.isShowNegativeXErrors().
  • and at least one of these instances contains at least one IErrorBarPainter instance.

  Specified by:

  showsNegativeXErrorBars in interface ITrace2D

  Returns:

  true if this trace renders error bars in negative x direction.

  See Also:

  • ITrace2D.showsNegativeXErrorBars()

• showsNegativeYErrorBars

  public boolean showsNegativeYErrorBars()

  Description copied from interface: ITrace2D

  Tests whether error bars in negative y direction are painted by this trace.

  Returns true if

  • this trace contains at leaste one IErrorBarPolicy instance that IErrorBarPolicy.isShowNegativeYErrors().
  • and at least one of these instances contains at least one IErrorBarPainter instance.

  Specified by:

  showsNegativeYErrorBars in interface ITrace2D

  Returns:

  true if this trace renders error bars in negative y direction.

  See Also:

  • ITrace2D.showsNegativeYErrorBars()

• showsPositiveXErrorBars

  public boolean showsPositiveXErrorBars()

  Description copied from interface: ITrace2D

  Tests whether error bars in positive x direction are painted by this trace.

  Returns true if

  • this trace contains at leaste one IErrorBarPolicy instance that IErrorBarPolicy.isShowPositiveXErrors().
  • and at least one of these instances contains at least one IErrorBarPainter instance.

  Specified by:

  showsPositiveXErrorBars in interface ITrace2D

  Returns:

  true if this trace renders error bars in positive x direction.

  See Also:

  • ITrace2D.showsPositiveXErrorBars()

• showsPositiveYErrorBars

  public boolean showsPositiveYErrorBars()

  Description copied from interface: ITrace2D

  Tests whether error bars in positive y direction are painted by this trace.

  Returns true if

  • this trace contains at leaste one IErrorBarPolicy instance that IErrorBarPolicy.isShowPositiveYErrors().
  • and at least one of these instances contains at least one IErrorBarPainter instance.

  Specified by:

  showsPositiveYErrorBars in interface ITrace2D

  Returns:

  true if this trace renders error bars in positive y direction.

  See Also:

  • ITrace2D.showsPositiveYErrorBars()

• toString

  public String toString()

  Returns getName().

  Overrides:

  toString in class Object

  Returns:

  getName().