/****************************************************************************
**
** Copyright (C) 2018 The Qt Company Ltd.
** Contact: https://www.qt.io/licensing/
**
** This file is part of the Qt Creator documentation.
**
** Commercial License Usage
** Licensees holding valid commercial Qt licenses may use this file in
** accordance with the commercial license agreement provided with the
** Software or, alternatively, in accordance with the terms contained in
** a written agreement between you and The Qt Company. For licensing terms
** and conditions see https://www.qt.io/terms-conditions. For further
** information use the contact form at https://www.qt.io/contact-us.
**
** GNU Free Documentation License Usage
** Alternatively, this file may be used under the terms of the GNU Free
** Documentation License version 1.3 as published by the Free Software
** Foundation and appearing in the file included in the packaging of
** this file. Please review the following information to ensure
** the GNU Free Documentation License version 1.3 requirements
** will be met: https://www.gnu.org/licenses/fdl-1.3.html.
**
****************************************************************************/

// **********************************************************************
// NOTE: the sections are not ordered by their logical order to avoid
// reshuffling the file each time the index order changes (i.e., often).
// Run the fixnavi.pl script to adjust the links to the index order.
// **********************************************************************

/*!
    \contentspage index.html
    \previouspage creator-clang-tools.html
    \page creator-heob.html
    \nextpage creator-cpu-usage-analyzer.html

    \title Detecting Memory Leaks with Heob

    \QC integrates the \l{https://github.com/ssbssa/heob}{Heob} heap observer
    for detecting buffer overruns and memory leaks. You must download and
    install Heob to run it from \QC.

    To run Heob on the currently open project:

    \list 1

        \li Select \uicontrol Analyze > \uicontrol Heob.

        \li In the \uicontrol {Heob path} field, enter the path to the Heob
            executable.

        \li Specify additional settings for running the checks. For more
            information about the available options, see
            \l{Specifying Heob Settings}.

        \li Select \uicontrol OK to run Heob.

    \endlist

    \QC runs the application, and then it runs Heob in a console window.

    \image qtcreator-heob.png

    Heob raises an access violation on buffer overruns and provides stack traces
    of the offending instruction and buffer allocation. The results are
    displayed when Heob exits normally.

    \image qtcreator-heob-output.png

    \section1 Specifying Heob Settings

    To specify settings for Heob, select \uicontrol Analyze > \uicontrol Heob.

    \image qtcreator-heob-settings.png

    In the \uicontrol {Extra arguments} field, enter additional arguments for
    running Heob. To list the available arguments in the Heob console, enter
    \c -H in this field and press \key Enter.

    For example, use the \c -oleaks.html option to record leak data in an HTML
    file. Together with this option, you can use the \c -g2 option to group the
    leaks visually in the file and the \c -L1024 option to record leak contents
    up to 1024 bytes in the file. For example, \c {-oleaks.html -g2 -L1024}

    Select \uicontrol Save to save the current settings as default.

    The following sections describe the available options in more detail.

    \section2 Recording Results

    The results of the checks are displayed in the \uicontrol Memcheck view and
    recorded in a file. You can specify the file name in the
    \uicontrol {XML output file} field. Heob creates the file in the project
    directory.

    You can use the process identifier (PID) as a variable in the file name.
    For example,  \c leaks-%p.xml. This injects Heob into the child processes,
    as well.

    Other variables you can use are \c %P for the parent PID and \c %n for the
    application name.

    If you use variables, \QC cannot open the file automatically, but you can
    open it from the project directory.

    \section2 Handling Exceptions

    In the \uicontrol {Handle exceptions} list, select \uicontrol Off to use the
    standard exception handler and have the debugger automatically attached if
    the application crashes. This works only if you register \QC is as a
    post-mortem debugger by selecting \uicontrol Tools > \uicontrol Options >
    \uicontrol Debugger > \uicontrol General >
    \uicontrol {Use Qt Creator for post-mortem debugging}.

    Select \uicontrol On to use the Heob exception handler that checks the
    reason and location of the crash and detects whether it occurred because of
    buffer overrun.

    Select \uicontrol Only to disable all Heob functions, except installing the
    exception handler. If the application crashes, only a stack trace of the
    crash is displayed. Therefore, this option is mostly useful when using Heob
    on the console or running it for child processes, as well.

    \section2 Raising Exceptions on Errors

    Select the \uicontrol {Raise breakpoint exception on error} check
    box to display errors when the application runs.

    If the option is disabled, errors such as \e {double free}, \e {free of
    invalid pointer}, and \e {not enough memory} just write all collected data
    into the results file and you will only see them at the end of the
    application run.

    If the option is enabled, the application stops at the error location.
    This is mostly useful when used with the \uicontrol {Run with debugger}
    option, which runs Heob under the debugger.

    \section2 Protecting Pages

    In the \uicontrol {Page protection} list, select \uicontrol Off to use
    standard memory allocation functions and enable only memory leak detection.

    Select \uicontrol After to place a protected page at the end of each
    allocated block and throw an exception if it is accessed. Select
    \uicontrol Before to place a protected page before each allocated block.
    These options consume memory and slow down the checks, and are therefore
    recommended only for 64-bit or short-running programs.

    Select \uicontrol {Freed memory protection} to protect all allocation pages
    when freed, so that their address space can never be used again. This is
    useful for \e use-after-free and \e double-free detection. However, the
    available memory address space can run out fast for 32-bit programs.

    \section2 Handling Leak Data

    In the \uicontrol {Leak details} list, determine how to handle the
    collected leak data when the process exits. Selecting \uicontrol None means
    that no leak data is collected. If you activate leak type detection, Heob
    might need more time to collect the data when the process exits.

    Select \uicontrol Simple to write all memory that was not freed into the
    results file.

    Select \uicontrol {Detect Leak Types} to parse all static and global memory
    blocks for references to the leaks. The reachable blocks are marked
    \e reachable and recursively checked for other references. If references are
    found, the blocks are marked \e {indirectly reachable}. The remaining blocks
    are checked for references to each other and marked either
    \e {indirectly lost} or \e {jointly lost} (if the blocks reference each
    other). The blocks that have no references at all are marked \e lost.
    Select \uicontrol {Detect Leak Types (Show Reachable)} to also record the
    the reachable blocks in the results file.

    Select \uicontrol {Fuzzy Detect Leak Types} to mark memory blocks
    \e reachable or \e {indirectly lost} if they contain references to any
    address. This option is useful when used with some custom allocators (such
    as \c av_malloc() in \c ffmpeg) that keep only an address somewhere inside
    the allocation block and do not refer directly to the start of an allocated
    block. Select \uicontrol {Detect Leak Types (Show Reachable)} to also
    record the reachable blocks in the results file.

    In the \uicontrol {Minimum leak size} list, select the size of
    leaks to detect in bytes.

    In the \uicontrol {Control leak recording} list, select \uicontrol Off to
    record all leaks. You cannot change leak recording while it is running.

    To start Heob without starting leak recording, select
    \uicontrol {On (Start Disabled)}. In the Heob console, turn recording
    \uicontrol on or \uicontrol off, \uicontrol clear all results, or
    select \uicontrol show to record all current leaks into the results file.
    Open the file to see its contents before the process exits.

    To start leak recording when Heob starts and still have the option to
    control the recording, select \uicontrol {On (Start Enabled)}.
*/
