# SNMP::Info::Layer2::Bay
# $Id$
# This module depricated.  See Layer2::BayStack
#
# Copyright (c) 2008 Max Baker changes from version 0.8 and beyond.
#
# Copyright (c) 2002,2003 Regents of the University of California
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
#     * Redistributions of source code must retain the above copyright notice,
#       this list of conditions and the following disclaimer.
#     * Redistributions in binary form must reproduce the above copyright
#       notice, this list of conditions and the following disclaimer in the
#       documentation and/or other materials provided with the distribution.
#     * Neither the name of the University of California, Santa Cruz nor the
#       names of its contributors may be used to endorse or promote products
#       derived from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.

package SNMP::Info::Layer2::Bay;

use strict;
use Exporter;
use SNMP::Info::Layer2;

@SNMP::Info::Layer2::Bay::ISA       = qw/SNMP::Info::Layer2 Exporter/;
@SNMP::Info::Layer2::Bay::EXPORT_OK = qw//;

use vars qw/$VERSION %FUNCS %GLOBALS %MIBS %MUNGE/;

$VERSION = '2.06';

# Set for No CDP
%GLOBALS = (
    %SNMP::Info::Layer2::GLOBALS,
    'cdp_id'  => 's5EnMsTopIpAddr',
    'cdp_run' => 's5EnMsTopStatus',
);

%FUNCS = (
    %SNMP::Info::Layer2::FUNCS,
    'imac2' => 'ifPhysAddress',

    # S5-ETH-MULTISEG-TOPOLOGY-MIB::s5EnMsTopNmmTable
    'bay_topo_slot'     => 's5EnMsTopNmmSlot',
    'bay_topo_port'     => 's5EnMsTopNmmPort',
    'bay_topo_ip'       => 's5EnMsTopNmmIpAddr',
    'bay_topo_seg'      => 's5EnMsTopNmmSegId',
    'bay_topo_mac'      => 's5EnMsTopNmmMacAddr',
    'bay_topo_platform' => 's5EnMsTopNmmChassisType',
    'bay_topo_localseg' => 's5EnMsTopNmmLocalSeg',
);

%MIBS = (
    %SNMP::Info::Layer2::MIBS,
    'SYNOPTICS-ROOT-MIB'           => 'synoptics',
    'S5-ETH-MULTISEG-TOPOLOGY-MIB' => 's5EnMsTop'
);

delete $MIBS{'CISCO-CDP-MIB'};

# 450's report full duplex as speed = 20mbps?!
$SNMP::Info::SPEED_MAP{20_000_000}  = '10 Mbps';
$SNMP::Info::SPEED_MAP{200_000_000} = '100 Mbps';

%MUNGE = ( %SNMP::Info::Layer2::MUNGE, 'i_mac2' => \&SNMP::Info::munge_mac, );

sub os {
    return 'bay';
}

sub os_ver {
    my $bay   = shift;
    my $descr = $bay->description();
    return unless defined $descr;

    # 303 / 304
    if ( $descr =~ m/Rev: \d+\.\d+\.\d+\.\d+-(\d+\.\d+\.\d+\.\d+)/ ) {
        return $1;
    }

    # 450
    if ( $descr =~ m/SW:v(\d+\.\d+\.\d+\.\d+)/ ) {
        return $1;
    }
    return;
}

sub os_bin {
    my $bay   = shift;
    my $descr = $bay->description();
    return unless defined $descr;

    # 303 / 304
    if ( $descr =~ m/Rev: \d+\.(\d+\.\d+\.\d+)-\d+\.\d+\.\d+\.\d+/ ) {
        return $1;
    }

    # 450
    if ( $descr =~ m/FW:v(\d+\.\d+\.\d+\.\d+)/ ) {
        return $1;
    }
    return;
}

sub vendor {

    # or nortel, or synopsis?
    return 'bay';
}

sub i_ignore {
    my $bay   = shift;
    my $descr = $bay->description();

    my $i_type = $bay->i_type();

    my %i_ignore;
    foreach my $if ( keys %$i_type ) {
        my $type = $i_type->{$if};
        $i_ignore{$if}++ if $type =~ /(loopback|propvirtual|cpu)/i;
    }

    return \%i_ignore;
}

sub interfaces {
    my $bay     = shift;
    my $i_index = $bay->i_index();

    return $i_index;
}

sub i_mac {
    my $bay   = shift;
    my $i_mac = $bay->i_mac2();

    # Bay 303's with a hw rev < 2.11.4.5 report the mac as all zeros
    foreach my $iid ( keys %$i_mac ) {
        my $mac = $i_mac->{$iid};
        delete $i_mac->{$iid} if $mac eq '00:00:00:00:00:00';
    }
    return $i_mac;
}

sub model {
    my $bay = shift;
    my $id  = $bay->id();
    return unless defined $id;
    my $model = &SNMP::translateObj($id);
    return $id unless defined $model;
    $model =~ s/^sreg-//i;

    my $descr = $bay->description();

    return '303' if ( $descr =~ /\D303\D/ );
    return '304' if ( $descr =~ /\D304\D/ );
    return '450' if ( $model =~ /BayStack450/ );
    return $model;
}

# Hack in some CDP type stuff

sub c_if {
    my $bay           = shift;
    my $bay_topo_port = $bay->bay_topo_port();

    my %c_if;
    foreach my $entry ( keys %$bay_topo_port ) {
        my $port = $bay_topo_port->{$entry};
        next unless defined $port;
        next if $port == 0;
        $c_if{"$port.1"} = $port;
    }
    return \%c_if;
}

sub c_ip {
    my $bay           = shift;
    my $bay_topo_ip   = $bay->bay_topo_ip();
    my $bay_topo_port = $bay->bay_topo_port();
    my $ip            = $bay->cdp_ip();

    # Count the number of devices seen on each port.
    #   more than one device seen means connected to a non-bay
    #   device, but other bay devices are squawking further away.
    my %ip_port;
    foreach my $entry ( keys %$bay_topo_ip ) {
        my $port = $bay_topo_port->{$entry};
        next unless defined $port;
        next if ( $port =~ /^[\d\.]+$/ and $port == 0 );
        my $ip = $bay_topo_ip->{$entry};
        push( @{ $ip_port{$port} }, $ip );
    }

    my %c_ip;
    foreach my $port ( keys %ip_port ) {
        my $ips = $ip_port{$port};
        if ( scalar @$ips == 1 ) {
            $c_ip{"$port.1"} = $ips->[0];
        }
        else {
            $c_ip{"$port.1"} = $ips;
        }
    }

    return \%c_ip;
}

sub c_port {
    my $bay           = shift;
    my $bay_topo_port = $bay->bay_topo_port();
    my $bay_topo_seg  = $bay->bay_topo_seg();

    my %c_port;
    foreach my $entry ( keys %$bay_topo_seg ) {
        my $port = $bay_topo_port->{$entry};
        next unless defined $port;
        next if $port == 0;

        # For fake remotes (multiple IPs for a c_ip), use first found
        next if defined $c_port{"$port.1"};

        my $seg = $bay_topo_seg->{$entry};

        # Segment id is (256 * remote slot_num) + (remote_port)
        my $remote_port = $seg % 256;

        $c_port{"$port.1"} = $remote_port;
    }

    return \%c_port;
}

sub c_platform {
    my $bay               = shift;
    my $bay_topo_port     = $bay->bay_topo_port();
    my $bay_topo_platform = $bay->bay_topo_platform();

    my %c_platform;
    foreach my $entry ( keys %$bay_topo_platform ) {
        my $port = $bay_topo_port->{$entry} || 0;
        next if $port == 0;

        # For fake remotes (multiple IPs for a c_ip), use first found
        next if defined $c_platform{"$port.1"};

        my $platform = $bay_topo_platform->{$entry};

        $c_platform{"$port.1"} = $platform;
    }

    return \%c_platform;
}

1;
__END__

=head1 NAME

SNMP::Info::Layer2::Bay - SNMP Interface to old Bay Network BayStack Switches

=head1 AUTHOR

Max Baker

=head1 SYNOPSIS

This module is Deprecated.  Please use Layer2::BayStack instead.

=head1 DESCRIPTION

Provides abstraction to the configuration information obtainable from a 
Bay device through SNMP. 

For speed or debugging purposes you can call the subclass directly, but not
after determining a more specific class using the method above. 

 my $bay = new SNMP::Info::Layer2::Bay(...);

=head2 Inherited Classes

=over

=item SNMP::Info::Layer2

=back

=head2 Required MIBs

=over

=item F<SYNOPTICS-ROOT-MIB>

=item F<S5-ETH-MULTISEG-TOPOLOGY-MIB>

=item Inherited classes

MIBs required by L<SNMP::Info::Layer2/"Required MIBs"> and its superclasses.

=back

=head1 GLOBALS

These are methods that return scalar value from SNMP

=over

=item $bay->vendor()

Returns 'bay' :)

=item $bay->model()

Cross references $bay->id() to the F<SYNOPTICS-MIB> and returns
the results.  303s and 304s have the same ID, so we have a hack
to return depending on which it is. 

Removes C<sreg-> from the model name

=item $baystack->os()

Returns 'bay'.

=item $bay->os_ver()

Returns the os version extracted from C<sysDescr>.

=item $bay->os_bin()

Returns the firmware version extracted from C<sysDescr>.

=item $bay->cdp_id()

Returns the IP that the device is sending out for its Nmm topology info.

(C<s5EnMsTopIpAddr>)

=item $bay->cdp_run()

Returns if the F<S5-ETH-MULTISEG-TOPOLOGY> info is on for this device. 

(C<s5EnMsTopStatus>)

=back

=head2 Globals imported from SNMP::Info::Layer2

See documentation in L<SNMP::Info::Layer2/"GLOBALS"> for details.

=head1 TABLE METHODS

These are methods that return tables of information in the form of a reference
to a hash.

=head2 Overrides

=over

=item $bay->interfaces()

Returns reference to map of IIDs to physical ports. 

Currently simply returns the C<ifIndex>

=item $bay->i_ignore()

Returns reference to hash of IIDs to ignore.

Simply calls the SNMP::Info::Layer2::i_ignore() for this.

=item $bay->i_mac()

Returns the C<ifPhysAddress> table entries. 

Removes all entries matching '00:00:00:00:00:00' -- Certain 
older revisions of Bay 303 and 304 firmware report all zeros
for each port mac.

=back

=head2 Pseudo CDP information

All entries with port=0 are local and ignored.

=over

=item $bay->c_if()

Returns reference to hash.  Key: port.1 Value: port (iid)

=item $bay->c_ip()

Returns reference to hash.  Key: port.1 

The value of each hash entry can either be a scalar or an array.
A scalar value is most likely a direct neighbor to that port. 
It is possible that there is a non-bay device in between this device and the
remote device.

An array value represents a list of seen devices.  The only time you will get
an array of neighbors, is if there is a non-bay device in between two or more
devices. 

Use the data from the Layer2 Topology Table below to dig deeper.

=item $bay->c_port()

Returns reference to hash. Key: IID, Value: Remote port (interfaces)

=item $bay->c_platform()

Returns reference to hash. Key: IID, Value: Remote device type

=item $bay->port()

Returns reference to hash. Key: port.1 Value: port

=item $bay->platform()

Returns reference to hash. Key: port.1 Value: Remote Device Type

=back

=head2 Layer2 Topology info (C<s5EnMsTopNmmTable>)

=over

=item $bay->bay_topo_slot()

Returns reference to hash.  Key: Table entry, Value:slot number

(C<s5EnMsTopNmmSlot>)

=item $bay->bay_topo_port()

Returns reference to hash.  Key: Table entry, Value:Port Number
(interface iid)

(C<s5EnMsTopNmmPort>)

=item $bay->bay_topo_ip()

Returns reference to hash.  Key: Table entry, Value:Remote IP address of entry

(C<s5EnMsTopNmmIpAddr>)

=item $bay->bay_topo_seg()

Returns reference to hash.  Key: Table entry, Value:Remote Segment ID

(C<s5EnMsTopNmmSegId>)

=item $bay->bay_topo_mac
(C<s5EnMsTopNmmMacAddr>)

Returns reference to hash.  Key: Table entry, Value:Remote MAC address

=item $bay->bay_topo_platform

Returns reference to hash.  Key: Table entry, Value:Remote Device Type

(C<s5EnMsTopNmmChassisType>)

=item $bay->bay_topo_localseg

Returns reference to hash.  Key: Table entry, Value:Boolean, if bay_topo_seg()
is local

(C<s5EnMsTopNmmLocalSeg>)

=back

=head2 Table Methods imported from SNMP::Info::Layer2

See documentation in L<SNMP::Info::Layer2/"TABLE METHODS"> for details.

=cut
