package Mail::Mbox::MessageParser::Perl;

no strict;

@ISA = qw( Exporter Mail::Mbox::MessageParser );

use strict;
use Carp;

use Mail::Mbox::MessageParser;
use Mail::Mbox::MessageParser::Config;

use vars qw( $VERSION $DEBUG );

$VERSION = sprintf "%d.%02d%02d", q/1.60.5/ =~ /(\d+)/g;

*ENTRY_STILL_VALID = \&Mail::Mbox::MessageParser::MetaInfo::ENTRY_STILL_VALID;
sub ENTRY_STILL_VALID;

*DEBUG = \$Mail::Mbox::MessageParser::DEBUG;
*dprint = \&Mail::Mbox::MessageParser::dprint;
sub dprint;

#-------------------------------------------------------------------------------

sub new
{
  my ($proto, $self) = @_;

  carp "Need file_handle option" unless defined $self->{'file_handle'};

  bless ($self, __PACKAGE__);

  $self->_init();

  return $self;
}

#-------------------------------------------------------------------------------

sub _init
{
  my $self = shift;

  $self->{'CURRENT_LINE_NUMBER'} = 1;
  $self->{'CURRENT_OFFSET'} = 0;

  $self->{'READ_BUFFER'} = '';
  $self->{'START_OF_EMAIL'} = 0;
  $self->{'END_OF_EMAIL'} = 0;

  $self->{'READ_CHUNK_SIZE'} =
    $Mail::Mbox::MessageParser::Config{'read_chunk_size'};

  $self->SUPER::_init();
}

#-------------------------------------------------------------------------------

sub reset
{
  my $self = shift;

  $self->{'CURRENT_LINE_NUMBER'} = ($self->{'prologue'} =~ tr/\n//) + 1;
  $self->{'CURRENT_OFFSET'} = length($self->{'prologue'});

  $self->{'READ_BUFFER'} = '';
  $self->{'START_OF_EMAIL'} = 0;
  $self->{'END_OF_EMAIL'} = 0;

  $self->SUPER::reset();
}

#-------------------------------------------------------------------------------

sub end_of_file
{
  my $self = shift;

  # Reset eof in case the file was appended to. Hopefully this works all the
  # time. See perldoc -f seek for details.
  seek($self->{'file_handle'},0,1) if eof $self->{'file_handle'};

  return eof $self->{'file_handle'} &&
    $self->{'END_OF_EMAIL'} == length($self->{'READ_BUFFER'});
}

#-------------------------------------------------------------------------------

sub _read_prologue
{
  my $self = shift;

  dprint "Reading mailbox prologue using Perl";

  $self->_read_until_match(
    qr/$Mail::Mbox::MessageParser::Config{'from_pattern'}/m,0);

  my $start_of_email = pos($self->{'READ_BUFFER'});
  $self->{'prologue'} = substr($self->{'READ_BUFFER'}, 0, $start_of_email);

  # Set up for read_next_email
  $self->{'CURRENT_LINE_NUMBER'} += ($self->{'prologue'} =~ tr/\n//);
  $self->{'CURRENT_OFFSET'} = $start_of_email;
  $self->{'END_OF_EMAIL'} = $start_of_email;
}

#-------------------------------------------------------------------------------

sub read_next_email
{
  my $self = shift;

  return undef if $self->end_of_file();

  $self->{'email_line_number'} = $self->{'CURRENT_LINE_NUMBER'};
  $self->{'email_offset'} = $self->{'CURRENT_OFFSET'};

  $self->{'START_OF_EMAIL'} = $self->{'END_OF_EMAIL'};

  # Slurp in an entire multipart email (but continue looking for the next
  # header so that we can get any following newlines as well)
  unless ($self->_read_header())
  {
    return $self->_extract_email_and_finalize();
  }

  unless ($self->_read_email_parts())
  {
    # Could issue a warning here, but I'm not sure how to do this cleanly for
    # a work-only module like this. Maybe something like CGI's cgi_error()?
    dprint "Inconsistent multi-part message. Could not find ending for " .
      "boundary \"" . $self->_multipart_boundary() . "\"";

    # Try to read the content length and use that
    my $email_header = substr($self->{'READ_BUFFER'}, $self->{'START_OF_EMAIL'},
      $self->{'START_OF_BODY'} - $self->{'START_OF_EMAIL'});

    my $content_length = Mail::Mbox::MessageParser::_GET_HEADER_FIELD(
      \$email_header, 'Content-Length:', $self->{'endline'});

    if (defined $content_length)
    {
      $content_length =~ s/Content-Length: *(\d+).*/$1/i;
      pos($self->{'READ_BUFFER'}) = $self->{'START_OF_EMAIL'} + $content_length;
    }
    # Otherwise use the start of the body 
    else
    {
      pos($self->{'READ_BUFFER'}) = $self->{'START_OF_BODY'};
    }

    # Reset the search and look for the start of the
    # next email.
    $self->_read_rest_of_email();

    return $self->_extract_email_and_finalize();
  }

  $self->_read_rest_of_email();

  return $self->_extract_email_and_finalize();
}

#-------------------------------------------------------------------------------

sub _read_rest_of_email
{
  my $self = shift;

  # Look for the start of the next email
  while (1)
  {
    while ($self->{'READ_BUFFER'} =~
      m/$Mail::Mbox::MessageParser::Config{'from_pattern'}/mg)
    {
      $self->{'END_OF_EMAIL'} = pos($self->{'READ_BUFFER'}) - length($1);

      my $endline = $self->{'endline'};

      # Keep looking if the header we found is part of a "Begin Included
      # Message".
      my $end_of_string = '';
      my $backup_amount = 100;
      do
      {
        $backup_amount *= 2;
        $backup_amount = $self->{'END_OF_EMAIL'} - $self->{'START_OF_EMAIL'}
          if $backup_amount >
            $self->{'END_OF_EMAIL'} - $self->{'START_OF_EMAIL'};

        $end_of_string = substr($self->{'READ_BUFFER'},
          $self->{'END_OF_EMAIL'}-$backup_amount, $backup_amount);
      } while (index($end_of_string, "$endline$endline") == -1 &&
        $backup_amount < $self->{'END_OF_EMAIL'} - $self->{'START_OF_EMAIL'});

      next if $end_of_string =~
          /$endline-----(?: Begin Included Message |Original Message)-----$endline[^\r\n]*(?:$endline)*$/i;

      next unless $end_of_string =~ /$endline$endline$/;

      # Found the next email!
      return;
    }

    # Didn't find next email in current buffer. Most likely we need to read some
    # more of the mailbox. Shift the current email to the front of the buffer
    # unless we've already done so.
    my $shift_amount = $self->{'START_OF_EMAIL'};
    $self->{'READ_BUFFER'} =
      substr($self->{'READ_BUFFER'}, $self->{'START_OF_EMAIL'});
    $self->{'START_OF_EMAIL'} -= $shift_amount;
    $self->{'START_OF_BODY'} -= $shift_amount;
    pos($self->{'READ_BUFFER'}) = length($self->{'READ_BUFFER'});

    # Start looking at the end of the buffer, but back up some in case the
    # edge of the newly read buffer contains the start of a new header. I
    # believe the RFC says header lines can be at most 90 characters long.
    my $backup_amount = 90;
    $backup_amount = length($self->{'READ_BUFFER'}) - 1
      if length($self->{'READ_BUFFER'}) < $backup_amount;

    unless ($self->_read_until_match(
      qr/$Mail::Mbox::MessageParser::Config{'from_pattern'}/m,$backup_amount))
     {
      $self->{'END_OF_EMAIL'} = length($self->{'READ_BUFFER'});
      return;
    }

    redo;
  }
}

#-------------------------------------------------------------------------------

sub _multipart_boundary
{
  my $self = shift;

  my $endline = $self->{'endline'};

  if (substr($self->{'READ_BUFFER'},$self->{'START_OF_EMAIL'},
    $self->{'START_OF_BODY'}-$self->{'START_OF_EMAIL'}) =~
    /^(content-type: *multipart[^\n\r]*$endline( [^\n\r]*$endline)*)/im)
  {
    my $content_type_header = $1;
    $content_type_header =~ s/$endline//g;

    if ($content_type_header =~ /boundary *= *"([^"]*)"/i ||
        $content_type_header =~ /boundary *= *([-0-9A-Za-z'()+_,.\/:=? ]*[-0-9A-Za-z'()+_,.\/:=?])/i)
    {
      return $1
    }
  }

  return undef;
}

#-------------------------------------------------------------------------------

sub _read_email_parts
{
  my $self = shift;

  my $boundary = $self->_multipart_boundary();

  return 1 unless defined $boundary;

  # RFC 1521 says the boundary can be no longer than 70 characters. Back up a
  # little more than that.
  my $endline = $self->{'endline'};
  $self->_read_until_match(qr/^--\Q$boundary\E--$endline/m,76)
    or return 0;

  return 1;
}

#-------------------------------------------------------------------------------

sub _extract_email_and_finalize
{
  my $self = shift;

  $self->{'email_length'} = $self->{'END_OF_EMAIL'}-$self->{'START_OF_EMAIL'};

  my $email = substr($self->{'READ_BUFFER'}, $self->{'START_OF_EMAIL'},
    $self->{'email_length'});

  $self->{'CURRENT_LINE_NUMBER'} += ($email =~ tr/\n//);
  $self->{'CURRENT_OFFSET'} += $self->{'email_length'};

  $self->{'email_number'}++;

  $self->SUPER::read_next_email();

  return \$email;
}

#-------------------------------------------------------------------------------

sub _read_header
{
  my $self = shift;

  $self->_read_until_match(qr/$self->{'endline'}$self->{'endline'}/m,0)
    or return 0;

  $self->{'START_OF_BODY'} =
    pos($self->{'READ_BUFFER'}) + length("$self->{'endline'}$self->{'endline'}");

  return 1;
}

#-------------------------------------------------------------------------------

# The search position is at the start of the pattern when this function
# returns 1.
sub _read_until_match
{
  my $self = shift;
  my $pattern = shift;
  my $backup = shift;

  # Start looking at the end of the buffer, but back up some in case the edge
  # of the newly read buffer contains part of the pattern.
  if (!defined pos($self->{'READ_BUFFER'}) ||
      pos($self->{'READ_BUFFER'}) - $backup <= 0) {
    pos($self->{'READ_BUFFER'}) = 0;
  } else {
    pos($self->{'READ_BUFFER'}) -= $backup;
  }

  while (1)
  {
    if ($self->{'READ_BUFFER'} =~ m/($pattern)/mg)
    {
      pos($self->{'READ_BUFFER'}) -= length($1);
      return 1;
    }

    pos($self->{'READ_BUFFER'}) = length($self->{'READ_BUFFER'});

    unless ($self->_read_chunk()) {
      $self->{'END_OF_EMAIL'} = length($self->{'READ_BUFFER'});
      return 0;
    }

    if (pos($self->{'READ_BUFFER'}) - $backup <= 0) {
      pos($self->{'READ_BUFFER'}) = 0;
    } else {
      pos($self->{'READ_BUFFER'}) -= $backup;
    }
  }
}

#-------------------------------------------------------------------------------

# Maintains pos($self->{'READ_BUFFER'})
sub _read_chunk
{
  my $self = shift;

  my $search_position = pos($self->{'READ_BUFFER'});

  # Can't use sysread because it doesn't work with ungetc
  if ($self->{'READ_CHUNK_SIZE'} == 0)
  {
    local $/ = undef;

    return 0 if eof $self->{'file_handle'};

    # < $self->{'file_handle'} > doesn't work, so we use readline
    $self->{'READ_BUFFER'} = readline($self->{'file_handle'});
    pos($self->{'READ_BUFFER'}) = $search_position;
    return 1;
  }
  else
  {
    my $total_amount_read = 0;
    my $amount_read = 0;

    while ($total_amount_read < $self->{'READ_CHUNK_SIZE'})
    {
      $amount_read = read($self->{'file_handle'}, $self->{'READ_BUFFER'},
        $self->{'READ_CHUNK_SIZE'} - $total_amount_read,
        length($self->{'READ_BUFFER'}));

      pos($self->{'READ_BUFFER'}) = $search_position;

      if ($amount_read == 0)
      {
        return 1 unless $total_amount_read == 0;

        return 0;
      }

      $total_amount_read += $amount_read;
    }

    return 1;
  }
}

#-------------------------------------------------------------------------------

1;

__END__

# --------------------------------------------------------------------------

=head1 NAME

Mail::Mbox::MessageParser::Perl - A Perl-based mbox folder reader

=head1 SYNOPSIS

  #!/usr/bin/perl

  use Mail::Mbox::MessageParser;

  my $filename = 'mail/saved-mail';
  my $filehandle = new FileHandle($filename);

  my $folder_reader =
    new Mail::Mbox::MessageParser( {
      'file_name' => $filename,
      'file_handle' => $filehandle,
    } );

  die $folder_reader unless ref $folder_reader;

  # Any newlines or such before the start of the first email
  my $prologue = $folder_reader->prologue;
  print $prologue;

  # This is the main loop. It's executed once for each email
  while(!$folder_reader->end_of_file());
  {
    my $email = $folder_reader->read_next_email();
    print $email;
  }

=head1 DESCRIPTION

This module implements a Perl-based mbox folder reader.  Users must not
instantiate this class directly--use Mail::Mbox::MessageParser instead. The
base MessageParser module will automatically manage the use of faster
implementations if they can be used.

=head2 METHODS AND FUNCTIONS

The following methods and functions are specific to the
Mail::Mbox::MessageParser::Perl package. For additional inherited ones, see
the Mail::Mbox::MessageParser documentation.

=over 4

=item $ref = new( { 'file_name' => <mailbox file name>,
                    'file_handle' => <mailbox file handle> });

    <file_name> - The full filename of the mailbox
    <file_handle> - An opened file handle for the mailbox

The constructor for the class takes two parameters. The optional I<file_name>
parameter is the filename of the mailbox. The required I<file_handle> argument
is the opened file handle to the mailbox. 

Returns a reference to a Mail::Mbox::MessageParser object, or a string
describing the error.

=back


=head1 BUGS

No known bugs.

Contact david@coppit.org for bug reports and suggestions.


=head1 AUTHOR

David Coppit <david@coppit.org>.


=head1 LICENSE

This software is distributed under the terms of the GPL. See the file
"LICENSE" for more information.


=head1 HISTORY

This code was originally part of the grepmail distribution. See
http://grepmail.sf.net/ for previous versions of grepmail which included early
versions of this code.


=head1 SEE ALSO

Mail::Mbox::MessageParser

=cut
