# utlist: linked list macros for C structures

Troy D. Hanson
`<thanson@users.sourceforge.net>`
version 1.9.5, November 2011

## Introduction

A set of general-purpose linked list macros for C structures are included with uthash in `utlist.h`. To use these macros in your own C program, just copy `utlist.h` into your source directory and use it in your programs.

    #include "utlist.h"

These macros support the basic linked list operations: adding and deleting elements, sorting them and iterating over them.

### Download

To download the `utlist.h` header file, follow the link on the uthash home page.

### BSD licensed

This software is made available under the revised BSD license. It is free and open source.

### Platforms

The utlist macros have been tested on:

- Linux,

- Mac OS X, and

- Windows, using Visual Studio 2008, Visual Studio 2010, or Cygwin/MinGW.

## Using utlist

### Types of lists

Three types of linked lists are supported:

- singly-linked lists,

- doubly-linked lists, and

- circular, doubly-linked lists

#### Efficiency

For all types of lists, prepending elements and deleting elements are constant-time operations. Appending to a singly-linked list is an O(n) operation but appending to a doubly-linked list is constant time using these macros. (This is because, in the utlist implementation of the doubly-linked list, the head element’s `prev` member points back to the list tail, even when the list is non-circular). Sorting is an O(n log(n)) operation. Iteration and searching are `O(n)` for all list types.

### List elements

You can use any structure with these macros, as long as the structure contains a `next` pointer. If you want to make a doubly-linked list, the element also needs to have a `prev` pointer.

    typedef struct element {
        char *name;
        struct element *prev; /* needed for a doubly-linked list only */
        struct element *next; /* needed for singly- or doubly-linked lists */
    } element;

You can name your structure anything. In the example above it is called `element`. Within a particular list, all elements must be of the same type.

### List head

The list head is simply a pointer to your element structure. You can name it anything. It must be initialized to `NULL`.

    element *head = NULL;

### List operations

The lists support inserting or deleting elements, sorting the elements and iterating over them.

Singly-linked | Doubly-linked | Circular, doubly-linked
--- | --- | ---
`LL_PREPEND(head,add);` | `DL_PREPEND(head,add);` | `CDL_PREPEND(head,add;`
`LL_APPEND(head,add);` | `DL_APPEND(head,add);` | ``
`LL_CONCAT(head1,head2);` | `DL_CONCAT(head1,head2);` | ``
`LL_DELETE(head,del);` | `DL_DELETE(head,del);` | `CDL_DELETE(head,del);`
`LL_SORT(head,cmp);` | `DL_SORT(head,cmp);` | `CDL_SORT(head,cmp);`
`LL_FOREACH(head,elt) {…}` | `DL_FOREACH(head,elt) {…}` | `CDL_FOREACH(head,elt) {…}`
`LL_FOREACH_SAFE(head,elt,tmp) {…}` | `DL_FOREACH_SAFE(head,elt,tmp) {…}` | `CDL_FOREACH_SAFE(head,elt,tmp1,tmp2) {…}`
`LL_SEARCH_SCALAR(head,elt,mbr,val);` | `DL_SEARCH_SCALAR(head,elt,mbr,val);` | `CDL_SEARCH_SCALAR(head,elt,mbr,val);`
`LL_SEARCH(head,elt,like,cmp);` | `DL_SEARCH(head,elt,like,cmp);` | `CDL_SEARCH(head,elt,like,cmp);`

Prepend means to insert an element in front of the existing list head (if any), changing the list head to the new element. Append means to add an element at the end of the list, so it becomes the new tail element. Concatenate takes two properly constructed lists and appends the second list to the first. (Visual Studio 2008 does not support `LL_CONCAT` and `DL_CONCAT`, but VS2010 is ok.)

The sort operation never moves the elements in memory; rather it only adjusts the list order by altering the `prev` and `next` pointers in each element. Also the sort operation can change the list head to point to a new element.

The foreach operation is for easy iteration over the list from the head to the tail. A usage example is shown below. You can of course just use the `prev` and `next` pointers directly instead of using the foreach macros. The foreach_safe operation should be used if you plan to delete any of the list elements while iterating.

The search operation is a shortcut for iteration in search of a particular element. It is not any faster than manually iterating and testing each element. There are two forms: the "scalar" version searches for an element using a simple equality test on a given structure member, while the general version takes an element to which all others in the list will be compared using a `cmp` function.

The parameters shown in the table above are explained here:

head

  The list head (a pointer to your list element structure).

add

  A pointer to the list element structure you are adding to the list.

del

  A pointer to the list element structure you are deleting from the list.

elt

  A pointer that will be assigned to each list element in succession (see example) in the case of iteration macros; also, the output pointer from the search macros.

like

  An element pointer, having the same type as `elt`, for which the search macro seeks a match (if found, the match is stored in `elt`). A match is determined by the given `cmp` function.

cmp

  pointer to comparison function which accepts two arguments-- these are pointers to two element structures to be compared. The comparison function must return an `int` that is negative, zero, or positive, which specifies whether the first item should sort before, equal to, or after the second item, respectively. (In other words, the same convention that is used by `strcmp`). Note that under Visual Studio 2008 you may need to declare the two arguments as `void *` and then cast them back to their actual types.

tmp

  A pointer of the same type as `elt`. Used internally. Need not be initialized.

mbr

  In the scalar search macro, the name of a member within the `elt` structure which will be tested (using `==`) for equality with the value `val`.

val

  In the scalar search macro, specifies the value of (of structure member `field`) of the element being sought.

### Example

This example program reads names from a text file (one name per line), and appends each name to a doubly-linked list. Then it sorts and prints them.

A doubly-linked list

    #include <stdio.h>
    #include <stdlib.h>
    #include <string.h>
    #include "utlist.h"

    #define BUFLEN 20

    typedef struct el {
        char bname[BUFLEN];
        struct el *next, *prev;
    } el;

    int namecmp(el *a, el *b) {
        return strcmp(a->bname,b->bname);
    }

    el *head = NULL; /* important- initialize to NULL! */

    int main(int argc, char *argv[]) {
        el *name, *elt, *tmp, etmp;

        char linebuf[BUFLEN];
        FILE *file;

        if ( (file = fopen( "test11.dat", "r" )) == NULL ) {
            perror("can't open: ");
            exit(-1);
        }

        while (fgets(linebuf,BUFLEN,file) != NULL) {
            if ( (name = (el*)malloc(sizeof(el))) == NULL) exit(-1);
            strncpy(name->bname,linebuf,BUFLEN);
            DL_APPEND(head, name);
        }
        DL_SORT(head, namecmp);
        DL_FOREACH(head,elt) printf("%s", elt->bname);

        memcpy(&etmp.bname, "WES\n", 5);
        DL_SEARCH(head,elt,&etmp,namecmp);
        if (elt) printf("found %s\n", elt->bname);

        /* now delete each element, use the safe iterator */
        DL_FOREACH_SAFE(head,elt,tmp) {
          DL_DELETE(head,elt);
        }

        fclose(file);

        return 0;
    }