Publishing DocBook Documents

| DocBook: The Definitive Guide Version 2.0.8 (Alpha)

# 4

# Publishing DocBook Documents

$Revision: 1.7 $

$Date: 2002/12/29 20:24:04 $

Creating and editing SGML/XML documents is usually only half the battle. After you've composed your document, you'll want to publish it. Publishing, for our purposes, means either print or web publishing. For SGML and XML documents, this is usually accomplished with some kind of stylesheet. In the (not too distant) future, you may be able to publish an XML document on the Web by simply putting it online with a stylesheet, but for now you'll probably have to translate your document into HTML.

There are many ways, using both free and commercial tools, to publish SGML documents. In this chapter, we're going to survey a number of possibilities, and then look at just one solution in detail: Jade and the Modular DocBook Stylesheets. We used jade to produce this book and to produce the online versions on the CD-ROM; it is also being deployed in other projects such as `<SGML>&tools;`, which originated with the Linux Documentation Project.

For a brief survey of other tools, see Appendix D.

## A Survey of Stylesheet Languages

Over the years, a number of attempts have been made to produce a standard stylesheet language and, failing that, a large number of proprietary languages have been developed.

FOSIs

  First, the U.S. Department of Defense, in an attempt to standardize stylesheets across military branches, created the Output Specification, which is defined in MIL-PRF-28001C, Markup Requirements and Generic Style Specification for Electronic Printed Output and Exchange of Text.[14]

  Commonly called FOSIs (for Formatting Output Specification Instances), they are supported by a few products including ADEPT Publisher by Arbortext and DL Composer by Datalogics.

DSSSL

  Next, the International Organization for Standardization (ISO) created DSSSL, the Document Style Semantics and Specification Language. Subsets of DSSSL are supported by Jade and a few other tools, but it never achieved widespread support.

CSS

  The W3C CSS Working Group created CSS as a style attachment language for HTML, and, more recently, XML.

XSL

  Most recently, the XML effort has identified a standard Extensible Style Language (XSL) as a requirement. The W3C XSL Working Group is currently pursuing that effort.

### Stylesheet Examples

By way of comparison, here's an example of each of the standard style languages. In each case, the stylesheet fragment shown contains the rules that reasonably formatted the following paragraph:

    <para>
    This is an example paragraph. It should be presented in a
    reasonable body font. <emphasis>Emphasized</emphasis> words
    should be printed in italics. A single level of
    <emphasis>Nested <emphasis>emphasis</emphasis> should also
    be supported.</emphasis>
    </para>

#### FOSI stylesheet

FOSIs are SGML documents. The element in the FOSI that controls the presentation of specific elements is the `e-i-c` (element in context) element. A sample FOSI fragment is shown in Example 4.1.

Example 4.1. A Fragment of a FOSI Stylesheet

    <e-i-c gi="para">
      <charlist>
        <textbrk startln="1" endln="1">
      </charlist>
    </e-i-c>

    <e-i-c gi="emphasis">
      <charlist inherit="1">
        <font posture="italic">
      </charlist>
    </e-i-c>

    <e-i-c gi="emphasis" context="emphasis">
      <charlist inherit="1">
        <font posture="upright">
      </charlist>
    </e-i-c>

#### DSSSL stylesheet

DSSSL stylesheets are written in a Scheme-like language (see the section called “Scheme” later in this chapter). It is the `element` function that controls the presentation of individual elements. See the example in Example 4.2.

Example 4.2. A Fragment of a DSSSL Stylesheet

    (element para
      (make paragraph
        (process-children)))

    (element emphasis
      (make sequence
        font-posture: 'italic
        (process-children)))

    (element (emphasis emphasis)
      (make sequence
        font-posture: 'upright
        (process-children)))

#### CSS stylesheet

CSS stylesheets consist of selectors and formatting properties, as shown in Example 4.3.

Example 4.3. A Fragment of a CSS Stylesheet

    para              { display: block }
    emphasis          { display: inline;
                        font-style: italic; }
    emphasis emphasis { display: inline;
                        font-style: upright; }

#### XSL stylesheet

XSL stylesheets are XML documents, as shown in Example 4.4. The element in the XSL stylesheet that controls the presentation of specific elements is the `xsl:template` element.

Example 4.4. A Fragment of an XSL Stylesheet

    <?xml version='1.0'?>
    <xsl:stylesheet xmlns:xsl="http://www.w3.org/XSL/Transform/1.0"
                    xmlns:fo="http://www.w3.org/XSL/Format/1.0">

    <xsl:template match="para">
      <fo:block>
        <xsl:apply-templates/>
      </fo:block>
    </xsl:template>

    <xsl:template match="emphasis">
      <fo:sequence font-style="italic">
        <xsl:apply-templates/>
      </fo:sequence>
    </xsl:template>

    <xsl:template match="emphasis/emphasis">
      <fo:sequence font-style="upright">
        <xsl:apply-templates/>
      </fo:sequence>
    </xsl:template>

    </xsl:stylesheet>

## Using Jade and DSSSL to Publish DocBook Documents

Jade is a free tool that applies DSSSL stylesheets to SGML and XML documents. As distributed, Jade can output RTF, TeX, MIF, and SGML. The SGML backend can be used for SGML to SGML transformations (for example, DocBook to HTML).

A complete set of DSSSL stylesheets for creating print and HTML output from DocBook is included on the CD-ROM. More information about obtaining and installing Jade appears in Appendix A.

## A Brief Introduction to DSSSL

DSSSL is a stylesheet language for both print and online rendering. The acronym stands for Document Style Semantics and Specification Language. It is defined by ISO/IEC 10179:1996. For more general information about DSSSL, see the DSSSL Page.

### Scheme

The DSSSL expression language is Scheme, a variant of Lisp. Lisp is a functional programming language with a remarkably regular syntax. Every expression looks like this:

    (operator [arg1] [arg2] ... [argn] )

This is called “prefix” syntax because the operator comes before its arguments.

In Scheme, the expression that subtracts 2 from 3, is `(- 3 2)`. And `(+ (- 3 2) (* 2 4))` is 9. While the prefix syntax and the parentheses may take a bit of getting used to, Scheme is not hard to learn, in part because there are no exceptions to the syntax.

### DSSSL Stylesheets

A complete DSSSL stylesheet is shown in Example 4.5. After only a brief examination of the stylesheet, you'll probably begin to have a feel for how it works. For each element in the document, there is an element rule that describes how you should format that element. The goal of the rest of this chapter is to make it possible for you to read, understand, and even write stylesheets at this level of complexity.

Example 4.5. A Complete DSSSL Stylesheet

    <!DOCTYPE style-sheet PUBLIC "-//James Clark//DTD DSSSL Style Sheet//EN">

    <style-sheet>
    <style-specification>
    <style-specification-body>

    (element chapter
      (make simple-page-sequence
        top-margin: 1in
        bottom-margin: 1in
        left-margin: 1in
        right-margin: 1in
        font-size: 12pt
        line-spacing: 14pt
        min-leading: 0pt
        (process-children)))

    (element title
      (make paragraph
        font-weight: 'bold
        font-size: 18pt
        (process-children)))

    (element para
      (make paragraph
        space-before: 8pt
        (process-children)))

    (element emphasis
      (if (equal? (attribute-string "role") "strong")
          (make sequence
        font-weight: 'bold
        (process-children))
          (make sequence
        font-posture: 'italic
        (process-children))))

    (element (emphasis emphasis)
      (make sequence
        font-posture: 'upright
        (process-children)))

    (define (super-sub-script plus-or-minus
                   #!optional (sosofo (process-children)))
      (make sequence
        font-size: (* (inherited-font-size) 0.8)
        position-point-shift: (plus-or-minus (* (inherited-font-size) 0.4))
        sosofo))

    (element superscript (super-sub-script +))
    (element subscript (super-sub-script -))

    </style-specification-body>
    </style-specification>
    </style-sheet>

This stylesheet is capable of formatting simple DocBook documents like the one shown in Example 4.6.

Example 4.6. A Simple DocBook Document

    <!DOCTYPE chapter PUBLIC "-//OASIS//DTD Docbook XML V4.1.2//EN"
                      "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd">
    <chapter><title>Test Chapter</title>
    <para>
    This is a paragraph in the test chapter. It is unremarkable in
    every regard. This is a paragraph in the test chapter. It is
    unremarkable in every regard. This is a paragraph in the test
    chapter. It is unremarkable in every regard.
    </para>
    <para>
    <emphasis role="bold">This</emphasis> paragraph contains
    <emphasis>some <emphasis>emphasized</emphasis> text</emphasis>
    and a <superscript>super</superscript>script
    and a <subscript>sub</subscript>script.
    </para>
    <para>
    This is a paragraph in the test chapter. It is unremarkable in
    every regard. This is a paragraph in the test chapter. It is
    unremarkable in every regard. This is a paragraph in the test
    chapter. It is unremarkable in every regard.
    </para>
    </chapter>

The result of formatting a simple document with this stylesheet can be seen in Figure 4.1.

Figure 4.1. The formatted simple document

We'll take a closer look at this stylesheet after you've learned a little more DSSSL.

### DSSSL Stylesheets Are SGML Documents

One of the first things that may strike you about DSSSL stylesheets (aside from all the parentheses), is the fact that the stylesheet itself is an SGML document! This means that you have all the power of SGML documents at your disposal in DSSSL stylesheets. In particular, you can use entities and marked sections to build a modular stylesheet.

In fact, DSSSL stylesheets are defined so that they correspond to a particular architecture. This means that you can change the DTD used by stylesheets within the bounds of the architecture. A complete discussion of document architectures is beyond the scope of this book, but we'll show you one way to take advantage of them in your DSSSL stylesheets in the section called “The DSSSL Architecture” later in the chapter.

### DSSSL Processing Model

A DSSSL processor builds a tree out of the source document. Each element in the source document becomes a node in the tree (processing instructions and other constructs become nodes as well). Processing the source tree begins with the root rule and continues until there are no more nodes to process.

### Global Variables and Side Effects

There aren't any global variables or side effects. It can be difficult to come to grips with this, especially if you're just starting out.

It is possible to define constants and functions and to create local variables with `let` expressions, but you can't create any global variables or change anything after you've defined it.

### DSSSL Expressions

DSSSL has a rich vocabulary of expressions for dealing with all of the intricacies of formatting. Many, but by no means all of them, are supported by Jade. In this introduction, we'll cover only a few of the most common.

#### Element expressions

Element expressions, which define the rules for formatting particular elements, make up the bulk of most DSSSL stylesheets. A simple element rule can be seen in Example 4.7. This rule says that a `para` element should be formatted by making a paragraph (see the section called “Make expressions”).

Example 4.7. A Simple DSSSL Rule

    (element para
      (make paragraph
        space-before: 8pt
        (process-children)))

An element expression can be made more specific by specifying an element and its ancestors instead of just specifying an element. The rule `(element title ...)` applies to all `Title` elements, but a rule that begins `(element (figure title) ...)` applies only to `Title` elements that are immediate children of `Figure` elements.

If several rules apply, the most specific rule is used.

When a rule is used, the node in the source tree that was matched becomes the “current node” while that element expression is being processed.

#### Make expressions

A make expression specifies the characteristics of a “flow object.” Flow objects are abstract representations of content (paragraphs, rules, tables, and so on). The expression:

    (make paragraph
      font-size: 12pt
      line-spacing: 14pt ...)

specifies that the content that goes “here” is to be placed into a paragraph flow object with a font-size of 12pt and a line-spacing of 14pt (all of the unspecified characteristics of the flow object are defaulted in the appropriate way).

They're called flow objects because DSSSL, in its full generality, allows you to specify the characteristics of a sequence of flow objects and a set of areas on the physical page where you can place content. The content of the flow objects is then “poured on to” (or flows in to) the areas on the page(s).

In most cases, it's sufficient to think of the make expressions as constructing the flow objects, but they really only specify the characteristics of the flow objects. This detail is apparent in one of the most common and initially confusing pieces of DSSSL jargon: the sosofo. Sosofo stands for a “specification of a sequence of flow objects.” All this means is that processing a document may result in a nested set of `make` expressions (in other words, the paragraph may contain a table that contains rows that contain cells that contain paragraphs, and so on).

The general form of a `make` expression is:

    (make flow-object-name
      keyword1: value1
      keyword2: value2
      ...
      keywordn: valuen
      (content-expression))

Keyword arguments specify the characteristics of the flow object. The specific characteristics you use depends on the flow object. The `content-expression` can vary; it is usually another make expression or one of the processing expressions.

Some common flow objects in the print stylesheet are:

`simple-page-sequence`

  Contains a sequence of pages. The keyword arguments of this flow object let you specify margins, headers and footers, and other page-related characteristics. Print stylesheets should always produce one or more `simple-page-sequence` flow objects.

  Nesting `simple-page-sequence` does not work. Characteristics on the inner sequences are ignored.

`paragraph`

  A paragraph is used for any block of text. This may include not only paragraphs in the source document, but also titles, the terms in a definition list, glossary entries, and so on. Paragraphs in DSSSL can be nested.

`sequence`

  A sequence is a wrapper. It is most frequently used to change inherited characteristics (like font style) of a set of flow objects without introducing other semantics (such as line breaks).

`score`

  A score flow object creates underlining, strike-throughs, or overlining.

`table`

  A table flow object creates a table of rows and cells.

The HTML stylesheet uses the SGML backend, which has a different selection of flow objects.

`element`

  Creates an element. The content of this `make` expression will appear between the start and end tags. The expression:

      (make element gi: "H1"
              (literal "Title"))

  produces `<H1>Title</H1>`.

`empty-element`

  Creates an empty element that may not have content. The expression:

      (make empty-element gi: "BR"
           attributes: '(("CLEAR" "ALL")))

  produces `<BR CLEAR="ALL">`.

`sequence`

  Produces no output in of itself as a wrapper, but is still required in DSSSL contexts in which you want to output several flow objects but only one object top-level object may be returned.

`entity-ref`

  Inserts an entity reference. The expression:

      (make entity-ref name: "nbsp")

  produces `&nbsp;`.

In both stylesheets, a completely empty flow object is constructed with `(empty-sosofo)`.

#### Selecting data

Extracting parts of the source document can be accomplished with these functions:

`(data `nd`)`

  Returns all of the character data from `nd` as a string.

`(attribute-string "`attr`" `nd`)`

  Returns the value of the `attr` attribute of `nd`.

`(inherited-attribute-string "`attr`" `nd`)`

  Returns the value of the `attr` attribute of `nd`. If that attribute is not specified on `nd`, it searches up the hierarchy for the first ancestor element that does set the attribute, and returns its value.

#### Selecting elements

A common requirement of formatting is the ability to reorder content. In order to do this, you must be able to select other elements in the tree for processing. DSSSL provides a number of functions that select other elements. These functions all return a list of nodes.

`(current-node)`

  Returns the current node.

`(children `nd`)`

  Returns the children of `nd`.

`(descendants `nd`)`

  Returns the descendants of `nd` (the children of `nd` and all their children's children, and so on).

`(parent `nd`)`

  Returns the parent of `nd`.

`(ancestor "`name`" `nd`)`

  Returns the first ancestor of `nd` named `name`.

`(element-with-id "`id`")`

  Returns the element in the document with the ID `id`, if such an element exists.

`(select-elements `node-list` "`name`")`

  Returns all of the elements of the `node-list` that have the name `name`. For example, `(select-elements (descendants (current-node)) "para")` returns a list of all the paragraphs that are descendants of the current node.

`(empty-node-list)`

  Returns a node list that contains no nodes.

Other functions allow you to manipulate node lists.

`(node-list-empty? `nl`)`

  Returns true if (and only if) `nl` is an empty node list.

`(node-list-length `nl`)`

  Returns the number of nodes in `nl`.

`(node-list-first `nl`)`

  Returns a node list that consists of the single node that is the first node in `nl`.

`(node-list-rest `nl`)`

  Returns a node list that contains all of the nodes in `nl` except the first node.

There are many other expressions for manipulating nodes and node lists.

#### Processing expressions

Processing expressions control which elements in the document will be processed and in what order. Processing an element is performed by finding a matching element rule and using that rule.

`(process-children)`

  Processes all of the children of the current node. In most cases, if no process expression is given, processing the children is the default behavior.

`(process-node-list `nl`)`

  Processes each of the elements in `nl`.

#### Define expressions

You can declare your own functions and constants in DSSSL. The general form of a function declaration is:

    (define (function args)
      function-body)

A constant declaration is:

    (define constant
      constant-function-body)

The distinction between constants and functions is that the body of a constant is evaluated when the definition occurs, while functions are evaluated when they are used.

#### Conditionals

In DSSSL, the constant `#t` represents true and `#f` false. There are several ways to test conditions and take action in DSSSL.

`if`

  The form of an `if` expression is:

      (if condition
        true-expression
        false-expression)

  If the condition is true, the `true-expression` is evaluated, otherwise the `false-expression` is evaluated. You must always provide an expression to be evaluated when the condition is not met. If you want to produce nothing, use `(empty-sosofo)`.

`case`

  `case` selects from among several alternatives:

      (case expression
        ((constant1) (expression1)
        ((constant2) (expression2)
        ((constant3) (expression3)
        (else else-expression))

  The value of the expression is compared against each of the constants in turn and the expression associated with the first matching constant is evaulated.

`cond`

  `cond` also selects from among several alternatives, but the selection is performed by evaluating each expression:

      (cond
        ((condition1) (expression1)
        ((condition2) (expression2)
        ((condition3) (expression3)
        (else else-expression))

  The value of each conditional is calculated in turn. The expression associated with the first condition that is true is evaluated.

Any expression that returns `#f` is false; all other expressions are true. This can be somewhat counterintuitive. In many programming languages, it's common to assume that “empty” things are false (0 is false, a null pointer is false, an empty set is false, for example.) In DSSSL, this isn't the case; note, for example, that an empty node list is not `#f` and is therefore true. To avoid these difficulties, always use functions that return true or false in conditionals. To test for an empty node list, use `(node-list-empty?)`.

#### Let expressions

The way to create local variables in DSSSL is with `(let)`. The general form of a `let` expression is:

    (let ((var1 expression1)
          (var2 expression2)
          ...
          (varn expressionn))
      let-body)

In a `let`; expression, all of the variables are defined “simultaneously.” The expression that defines `var2` cannot contain any references to any other variables defined in the same `let` expression. A `let*` expression allows variables to refer to each other, but runs slightly slower.

Variables are available only within the `let-body`. A common use of `let` is within a `define` expression:

    (define (cals-rule-default nd)
       (let* ((table (ancestor "table" nd))
              (frame (if (attribute-string "frame" table)
                         (attribute-string "frame" table)
                         "all")))
        (equal? frame "all")))

This function creates two local variables `table` and `frame`. `let` returns the value of the last expression in the body, so this function returns true if the `frame` attribute on the table is `all` or if no `frame` attribute is present.

#### Loops

DSSSL doesn't have any construct that resembles the “for loop” that occurs in most imperative languages like C and Java. Instead, DSSSL employs a common trick in functional languages for implementing a loop: tail recursion.

Loops in DSSSL use a special form of `let`. This loop counts from 1 to 10:

    (let loopvar ((count 1))
      (if (> count 10)
        #t
        (loopvar (+ count 1))))

| This variable controls the loop. It is declared without an initial value, immediately after the `let` operand.
| Any number of additional local variables can be defined after the loop variable, just as they can in any other `let` expression.
| If you ever want the loop to end, you have to put some sort of a test in it.
| This is the value that will be returned.
| Note that you iterate the loop by using the loop variable as if it was a function name.
| The arguments to this “function” are the values that you want the local variables declared in to have in the next iteration.

### A Closer Look at Example 4.5

Example 4.5 is a style sheet that contains a style specification. Stylesheets may consist of multiple specifications, as we'll see in the section called “A Single Stylesheet for Both Print and HTML”.

The actual DSSSL code goes in the style specification body, within the style specification. Each construction rule processes different elements from the source document.

#### Processing chapters

`Chapter`s are processed by the `chapter` construction rule. Each `Chapter` is formatted as a `simple-page-sequence`. Every print stylesheet should format a document as one or more simple page sequences. Characteristics on the simple page sequence can specify headers and footers as well as margins and other page parameters.

One important note about simple page sequences: they cannot nest. This means that you cannot blindly process divisions (`Part`s, `Reference`) and the elements they contain (`Chapter`s, `RefEntry`s) as simple page sequences. This sometimes involves a little creativity.

#### Processing titles

The `make` expression in the `title` element rule ensures that `Title`s are formatted in large, bold print.

This construction rule applies equally to `Chapter` titles, `Figure` titles, and `Book` titles. It's unlikely that you'd want all of these titles to be presented in the same way, so a more robust stylesheet would have to arrange the processing of titles with more context. This might be achieved in the way that nested `Emphasis` elements are handled in the section called “Processing emphasis”.

#### Processing paragraphs

`Para` elements are simply formatted as paragraphs.

#### Processing emphasis

Processing `Emphasis` elements is made a little more interesting because we want to consider an attribute value and the possibility that `Emphasis` elements can be nested.

In the simple case, in which we're processing an `Emphasis` element that is not nested, we begin by testing the value of the `role` attribute. If the content of that attribute is the string `strong`, it is formatted in bold; otherwise, it is formatted in italic.

The nested case is handled by the `(emphasis emphasis)` rule. This rule simply formats the content using an upright (nonitalic) font. This rule, like the rule for `Title`s, is not robust. `Emphasis` nested inside `strong` `Emphasis` won't be distinguished, for example, and nestings more than two elements deep will be handled just as nestings that are two deep.

#### Processing subscripts and superscripts

Processing `Subscript` and `Superscript` elements is really handled by the `super-sub-script` function. There are several interesting things about this function:

The `plus-or-minus` argument

  You might ordinarily think of passing a keyword or boolean argument to the `super-sub-script` function to indicate whether subscripts or superscripts are desired. But with Scheme, it's possible to pass the actual function as an argument!

  Note that in the element construction rules for `Superscript` and `Subscript`, we pass the actual functions `+` and `-`. In the body of `super-sub-script`, we use the `plus-or-minus` argument as a function name (it appears immediately after an open parenthesis).

The optional argument

  `optional` arguments are indicated by `#!optional` in the function declaration. Any number of `optional` arguments may be given, but each must specify a default value. This is accomplished by listing each argument and default value (an expression) as a pair.

  In `super-sub-script`, the optional argument `sosofo` is initialized to `process-children`. This means that at the point where the function is called, `process-children` is evaluated and the resulting `sosofo` is passed to the function.

Use of inherited characteristics

  It is possible to use the “current” value of an inherited characteristic to calculate a new value. Using this technique, superscripts and subscripts will be presented at 80 percent of the current font size.

### Customizing the Stylesheets

The best way to customize the stylesheets is to write your own “driver” file; this is a stylesheet that contains your local modifications and then includes the appropriate stylesheet from the standard distribution by reference. This allows you to make local changes and extensions without modifying the distributed files, which makes upgrading to the next release much simpler.

#### Writing Your Own Driver

A basic driver file looks like this:

    <!DOCTYPE style-sheet PUBLIC "-//James Clark//DTD DSSSL Style Sheet//EN" [
    <!ENTITY dbstyle PUBLIC "-//Norman Walsh//DOCUMENT DocBook Print Stylesheet//EN" CDATA DSSSL>
    ]>

    <style-sheet>
    <style-specification use="docbook">
    <style-specification-body>

    ;; your changes go here...

    </style-specification-body>
    </style-specification>
    <external-specification id="docbook" document="dbstyle">
    </style-sheet>

There are two public identifiers associated with the Modular DocBook Stylesheets:

- `-//Norman Walsh//DOCUMENT DocBook Print Stylesheet//EN`

- `-//Norman Walsh//DOCUMENT DocBook HTML Stylesheet//EN`

The former selects the print stylesheet and the latter selects the HTML stylesheet. There is an SGML Open catalog file in the distribution that maps these public identifiers to the stylesheet files.

You can add your own definitions, or redefinitions, of stylesheet rules and parameters so that

    ;; your changes go here...

occurs in the previous example.

For a concrete example of a driver file, see `plain.dsl` in the `docbook/print` directory in the stylesheet distribution (or on the CD-ROM). This is a customization of the print stylesheet, which turns off title page and TOC generation.

#### Changing the Localization

As distributed, the stylesheets use English for all generated text, but other localization files are also provided. At the time of this writing, the stylesheets support Catalan, Czech, Danish, Dutch, English, Finnish, French, German, Greek, Italian, Japanese, Norwegian, Polish, Portuguese, Portuguese (Brazil), Romanian, Russian, Slovak, Spanish, and Swedish. (If you can write a localization for another language, please contribute it.)

There are two ways to switch languages: by specifying a `lang` attribute, or by changing the default language in a customization.

##### Using the `lang` attribute

One of the DocBook common attributes is `lang`. If you specify a language, the DocBook stylesheets will use that language (and all its descendants, if no other language is specified) for generated text within that element.

Table 4.1 summarizes the language codes for the supported languages.[15] The following chapter uses text generated in French:

    <chapter lang="fr"><title>Bêtises</title>
    <para>Pierre qui roule n'amasse pas de mousse.</para>
    </chapter>

Table 4.1. DocBook Stylesheet Language Codes

Language Code | Language
--- | ---
`af` | Afrikaans
`ca` | Catalan
`cs` | Czech
`da` | Danish
`de` | German
`el` | Greek
`en` | English
`es` | Spanish
`et` | Estonian
`eu` | Basque
`fi` | Finnish
`fr` | French
`he` | Hebrew
`hu` | Hungarian
`id` | Indonesian
`it` | Italian
`ja` | Japanese
`ko` | Korean
`nl` | Dutch
`nn` | Nyorsk
`no` | Norwegian
`pl` | Polish
`pt` | Portuguese
`pt-br` | Portuguese (Brazil)
`ro` | Romanian
`ru` | Russian
`sk` | Slovak
`sl` | Slovenian
`sv` | Swedish
`th` | Thai
`tr` | Turkish
`uk` | Ukranian
`xh` | Xhosa
`zh-cn` | Chinese (Continental)
`zh-tw` | Chinese (Traditional)

##### Changing the default language

If no `lang` attribute is specified, the default language is used. You can change the default language with a driver.

In the driver, define the default language. Table 4.1 summarizes the language codes for the supported languages. The following driver makes German the default language:

    <!DOCTYPE style-sheet PUBLIC "-//James Clark//DTD DSSSL Style Sheet//EN" [
    <!ENTITY dbstyle PUBLIC "-//Norman Walsh//DOCUMENT DocBook Print Stylesheet//EN" CDATA DSSSL>
    ]>

    <style-sheet>
    <style-specification use="docbook">
    <style-specification-body>

    (define %default-language% "dege")

    </style-specification-body>
    </style-specification>
    <external-specification id="docbook" document="dbstyle">
    </style-sheet>

There are two other settings that can be changed only in a driver. Both of these settings are turned off in the distributed stylesheet:

`%gentext-language%`

  If a language code is specified in `%gentext-language%`, then that language will be used for all generated text, regardless of any `lang` attribute settings in the document.

`%gentext-use-xref-language%`

  If turned on (defined as `#t`), then the stylesheets will generate the text associated with a cross reference using the language of the target, not the current language. Consider the following book:

      <book><title>A Test Book</title>
      <preface>
      <para>There are three chapters in this book: <xref linkend="c1">,
      <xref linkend="c2">, and <xref linkend="c3">.
      </para>
      </preface>
      <chapter lang="usen"><title>English</title> ... </chapter>
      <chapter lang="fr"><title>French</title> ... </chapter>
      <chapter lang="dege"><title>Deutsch</title> ... </chapter>
      </book>

  The standard stylesheets render the Preface as something like this:

  > There are three chapters in this book: Chapter 1, Chapter 2, and Chapter 3.

  With `%gentext-use-xref-language%` turned on, it would render like this:

  > There are are three chapters in this book: Chapter 1, Chapitre 2, and Kapitel 3.

#### A Single Stylesheet for Both Print and HTML

A DSSSL stylesheet consists of one or more “style specifications.” Using more than one style specification allows you to build a single stylesheet file that can format with either the print or SGML backends. Example 4.8 shows a stylesheet with two style specifications.

Example 4.8. `both.dsl`: A Stylesheet with Two Style Specifications

    <!DOCTYPE style-sheet PUBLIC "-//James Clark//DTD DSSSL Style Sheet//EN" [
    <!ENTITY html-ss
      PUBLIC "-//Norman Walsh//DOCUMENT DocBook HTML Stylesheet//EN" CDATA dsssl>
    <!ENTITY print-ss
      PUBLIC "-//Norman Walsh//DOCUMENT DocBook Print Stylesheet//EN" CDATA dsssl>
    ]>
    <style-sheet>
    <style-specification id="print" use="print-stylesheet">
    <style-specification-body>

    ;; customize the print stylesheet

    </style-specification-body>
    </style-specification>
    <style-specification id="html" use="html-stylesheet">
    <style-specification-body>

    ;; customize the html stylesheet

    </style-specification-body>
    </style-specification>
    <external-specification id="print-stylesheet" document="print-ss">
    <external-specification id="html-stylesheet"  document="html-ss">
    </style-sheet>

Once you have stylesheets with more than one style specification, you have to be able to indicate which style specification you want to use. In Jade, you indicate this by providing the ID of the style specification after the stylesheet filename, separated with a hash mark: `#`.

Using the code from Example 4.8, you can format a document using the print stylesheet by running:

    jade -t rtf -d both.dsl#print file.sgm

and using the HTML stylesheet by running:

    jade -t sgml -d both.dsl#html file.sgm

### Dealing with Multiple Declarations

The DocBook SGML DTD and the DocBook DSSSL Stylesheets happen to use the same SGML declaration. This makes it very easy to run Jade with DocBook. However, you may sometimes wish to use Jade with other document types, for example the DocBook XML DTD, which has a different declaration. There are a couple of ways to do this.

#### Pass the Declaration Explicitly

If your stylesheets parse fine with the default declaration, but you want to use an alternate declaration with a particular document, just pass the declaration on the command line:

    jade options the-declaration the-document

Note that there's no option required before the declaration; it simply occurs before the first filename. Jade concatenates all of the files that you give it together, and parses them as if they were one document.

#### Use the Catalogs

The other way to fix this is with a little catalog trickery.

First, note that Jade always looks in the file called `catalog` in the same directory as the document that it is loading, and uses settings in that file in preference to settings in other catalogs.

With this fact, we can employ the following trick:

- Put a `catalog` file in the directory that contains your stylesheets, which contain an `SGMLDECL` directive. Jade understands the directive, which points to the SGML declaration that you should use when parsing the stylesheets. For the DocBook stylesheets, the DocBook declaration works fine.

- In the directory that contains the document you want to process, create a `catalog` file that contains an `SGMLDECL` directive that points to the SGML declaration that should be used when parsing the document.

There's no easy way to have both the stylesheet and the document in the same directory if they must be processed with different declarations. But this is usually not too inconvenient.

### The DSSSL Architecture

The concept of an architecture was promoted by HyTime. In some ways, it takes the standard SGML/XML notions of the role of elements and attributes and inverts them. Instead of relying on the name of an element to assign its primary semantics, it uses the values of a small set of fixed attributes.

While this may be counterintuitive initially, it has an interesting benefit. An architecture-aware processor can work transparently with many different DTDs. A small example will help illustrate this point.

### Note

The following example demonstrates the concept behind architectures, but for the sake of simplicity, it does not properly implement an architecture as defined in HyTime.

Imagine that you wrote an application that can read an SGML/XML document containing a letter (conforming to some letter DTD), and automatically print an envelope for the letter. It's easy to envision how this works. The application reads the content of the letter, extracts the address and return address elements from the source, and uses them to generate an envelope:

    <?xml version='1.0'>
    <!DOCTYPE letter "/share/sgml/letter/letter.dtd" [
    <!ENTITY myaddress "/share/sgml/entities/myaddress.xml">
    ]>
    <letter>
    <returnaddress>&myaddress;</returnaddress>
    <address>
    <name>Leonard Muellner</name>
    <company>O'Reilly &amp; Associates</company>
    <street>90 Sherman Street</street>
    <city>Cambridge</city><state>MA</state><zip>02140</zip>
    </address>
    <body>
    <salutation>Hi Lenny</salutation>
    ...
    </body>

The processor extracts the `Returnaddress` and `Address` elements and their children and prints the envelope accordingly.

Now suppose that a colleague from payroll comes by and asks you to adapt the application to print envelopes for mailing checks, using the information in the payroll database, which has a different DTD. And a week later, someone from sales comes by and asks if you can modify the application to use the contact information DTD. After a while, you would have 11 versions of this program to maintain.

Suppose that instead of using the actual element names to locate the addresses in the documents, you asked each person to add a few attributes to their DTD. By forcing the attributes to have fixed values, they'd automatically be present in each document, but authors would never have to worry about them.

For example, the address part of the letter DTD might look like this:

    <!ELEMENT address (name, company? street*, city, state, zip)>
    <!ATTLIST address
        ADDRESS CDATA   #FIXED "START"
    >

    <!ELEMENT name (#PCDATA)*>
    <!ATTLIST name
        ADDRESS CDATA   #FIXED "NAME"
    >

    <!ELEMENT company (#PCDATA)*>
    <!ATTLIST company
        ADDRESS CDATA   #FIXED "COMPANY"
    >

    <!ELEMENT street (#PCDATA)*>
    <!ATTLIST street
        ADDRESS CDATA   #FIXED "STREET"
    >

    <!ELEMENT city (#PCDATA)*>
    <!ATTLIST city
        ADDRESS CDATA   #FIXED "CITY"
    >

    <!ELEMENT state (#PCDATA)*>
    <!ATTLIST state
        ADDRESS CDATA   #FIXED "STATE"
    >

    <!ELEMENT zip (#PCDATA)*>
    <!ATTLIST zip
        ADDRESS CDATA   #FIXED "ZIP"
    >

Effectively, each address in a letter would look like this:

    <address ADDRESS="START">
    <name ADDRESS="NAME">Leonard Muellner</name>
    <company ADDRESS="COMPANY">O'Reilly &amp;amp; Associates</company>
    <street> ADDRESS="STREET">90 Sherman Street</street>
    <city ADDRESS="CITY">Cambridge</city><state ADDRESS="STATE">MA</state>
    <zip ADDRESS="ZIP">02140</zip>
    </address>

In practice, the author would not include the `ADDRESS` attributes; they are automatically provided by the DTD because they are `#FIXED`.[16]

Now the address portion of the payroll DTD might look like this:

    <!ELEMENT employee (name, mailingaddress)>

    <!ELEMENT name (#PCDATA)*>
    <!ATTLIST name
        ADDRESS CDATA   #FIXED "NAME"
    >

    <!ELEMENT mailingaddress (addrline1, addrline2,
                              city, state.or.province, postcode)>
    <!ATTLIST mailingaddress
        ADDRESS CDATA   #FIXED "START"
    >

    <!ELEMENT addrline1 (#PCDATA)*>
    <!ATTLIST addrline1
        ADDRESS CDATA   #FIXED "STREET"
    >

    <!ELEMENT addrline2 (#PCDATA)*>
    <!ATTLIST addrline2
        ADDRESS CDATA   #FIXED "STREET"
    >

    <!ELEMENT city (#PCDATA)*>
    <!ATTLIST city
        ADDRESS CDATA   #FIXED "CITY"
    >

    <!ELEMENT state.or.province (#PCDATA)*>
    <!ATTLIST state.or.province
        ADDRESS CDATA   #FIXED "STATE"
    >

    <!ELEMENT postcode (#PCDATA)*>
    <!ATTLIST postcode
        ADDRESS CDATA   #FIXED "ZIP"
    >

The employee records will look like this:

    <employee><name ADDRESS="NAME">Leonard Muellner</name>
    <mailingaddress ADDRESS="START">
    <addrline1 ADDRESS="STREET">90 Sherman Street</addrline1>
    <city ADDRESS="CITY">Cambridge</city>
    <state.or.province ADDRESS="STATE">MA</state.or.province>
    <postcode ADDRESS="ZIP">02140</postcode>
    </mailingaddress>
    </employee>

Your application no longer cares about the actual element names. It simply looks for the elements with the correct attributes and uses them. This is the power of an architecture: it provides a level of abstraction that processing applications can use to their advantage. In practice, architectural forms are a bit more complex to set up because they have facilities for dealing with attribute name conflicts, among other things.

Why have we told you all this? Because DSSSL is an architecture. This means you can modify the stylesheet DTD and still run your stylesheets through Jade.

Consider the case presented earlier in Example 4.8. In order to use this stylesheet, you must specify three things: the backend you want to use, the stylesheet you want to use, and the style specification you want to use. If you mismatch any of the parameters, you'll get the wrong results. In practice, the problem is compounded further:

- Some stylesheets support several backends (RTF, TeX, and SGML).

- Some stylesheets support only some backends (RTF and SGML, but not TeX or MIF).

- Some stylesheets support multiple outputs using the same backend (several kinds of HTML output, for example, using the SGML backend: HTML, HTMLHelp, JavaHelp, and so on).

- If you have complex stylesheets, some backends may require additional options to define parameter entities or stylesheet options.

None of this complexity is really necessary, after all, the options don't change—you just have to use the correct combinations. The mental model is really something like this: “I want a certain kind of output, TeX say, so I have to use this combination of parameters.”

You can summarize this information in a table to help keep track of it:

Desired Output | Backend | Style specification | Options | Supported?
--- | --- | --- | --- | ---
rtf | rtf | print | -V rtf-backend | yes
tex | tex | print | -V tex-backend -i tex | yes
html | sgml | htmlweb | -i html | yes
javahelp | sgml | help | -i help | yes
htmlhelp |  |  |  | no

Putting this information in a table will help you keep track of it, but it's not the best solution. The ideal solution is to keep this information on your system, and let the software figure it all out. You'd like to be able to run a command, tell it what output you want from what stylesheet, what file you want to process, and then let it figure everything else out. For example:

    format html mybook.dsl mydoc.sgm

One way to do this is to put the configuration data in a separate file, and have the format command load it out of this other file. The disadvantage of this solution is that it introduces another file that you have to maintain and it's independent from the stylesheet so it isn't easy to keep it up-to-date.

In the DSSSL case, a better alternative is to modify the stylesheet DTD so you can store the configuration data in the stylesheet. Using this alternate DTD, your `mybook.dsl` stylesheets might look like this:

    <!DOCTYPE style-sheet
      PUBLIC "-//Norman Walsh//DTD Annotated DSSSL Style Sheet V1.2//EN" [
    <!-- perhaps additional declarations here -->
    ]>
    <style-sheet>
    <title>DocBook Stylesheet</title>
    <doctype pubid="-//OASIS//DTD DocBook V3.1//EN">
    <doctype pubid="-//Davenport//DTD DocBook V3.0//EN">
    <doctype pubid="-//Norman Walsh//DTD Website V1.4//EN">
    <backend name="rtf"  backend="rtf"  fragid="print"
             options="-V rtf-backend" default="true">
    <backend name="tex"  backend="tex"  fragid="print"
             options="-V tex-backend -i tex">
    <backend name="html" backend="sgml" fragid="htmlweb" options="-i html">
    <backend name="javahelp" backend="sgml" fragid="help"  options="-i help">
    <backend name="htmlhelp" supported="no">
    <style-specification id="print" use="docbook">
    <style-specification-body>
    .
    .
    .

In this example, the stylesheet has been annotated with a title, a list of the public IDs to which it is applicable, and a table that provides information about the output formats that it supports.

Using this information, the format command can get all the information it needs to construct the appropriate call to Jade. To make HTML from `myfile.sgm`, format would run the following:

    jade -t sgml -d mybook.dsl#htmlweb -i html myfile.sgm

The additional information, titles and public IDs, can be used as part of a GUI interface to simplify the selection of stylesheets for an author.

The complete annotated stylesheet DTD, and an example of the format command script, are provided on the CD-ROM.

## A Brief Introduction to XSL

### Bob Stayton

### Using XSL tools to publish DocBook documents

There is a growing list of tools to process DocBook documents using XSL stylesheets. Each tool implements parts or all of the XSL standard, which actually has several components:

Extensible Stylesheet Language (XSL)

  A language for expressing stylesheets written in XML. It includes the formatting object language, but refers to separate documents for the transformation language and the path language.

XSL Transformation (XSLT)

  The part of XSL for transforming XML documents into other XML documents, HTML, or text. It can be used to rearrange the content and generate new content.

XML Path Language (XPath)

  A language for addressing parts of an XML document. It is used to find the parts of your document to apply different styles to. All XSL processors use this component.

To publish HTML from your XML documents, you just need an XSLT engine. To get to print, you need an XSLT engine to produce formatting objects (FO), which then must be processed with a formatting object processor to produce PostScript or PDF output.

James Clark's XT was the first useful XSLT engine, and it is still in wide use. It is written in Java, so it runs on many platforms, and it is free ( http://www.jclark.com). XT comes with James Clark's nonvalidating parser XP, but you can substitute a different Java parser. Here is a simple example of using XT from the Unix command line to produce HTML: You'll need to alter your `CLASSPATH` environment variable to include the path to where you put the `.jar` files from the XT distribution.

    CLASSPATH=xt.jar:xp.jar:sax.jar
    export CLASSPATH
    java  com.jclark.xsl.sax.Driver filename.xml docbook/html/docbook.xsl > output.html

If you replace the HTML stylesheet with a formatting object stylesheet, XT will produce a formatting object file. Then you can convert that to PDF using FOP, a formatting object processor available for free from the Apache XML Project ( http://xml.apache.org). Here is an example of that two stage processing:

    CLASSPATH=xt.jar:xp.jar:sax.jar:fop.jar
    export CLASSPATH
    java  com.jclark.xsl.sax.Driver filename.xml docbook/fo/docbook.xsl > output.fo
    java  org.apache.fop.apps.CommandLine output.fo output.pdf

As of this writing, some other XSLT processors to choose from include:

- 4XSLT, written in Python, from FourThought LLC ( http://www.fourthought.com)

- Sablotron, written in C++, from Ginger Alliance ( http://www.gingerall.com)

- Saxon, written in Java, from Michael Kay ( http://users.iclway.co.uk/mhkay/saxon)

- Xalan, written in Java, from the Apache XML Project ( http://xml.apache.org)

- XML::XSLT,written in Perl, from Geert Josten and Egon Willighagen ( http://www.cpan.org)

For print output, these additional tools are available for processing formatting objects:

- XEP (written in Java) from RenderX ( http://www.renderx.com).

- PassiveTeX from Sebastian Rahtz (http://users.ox.ac.uk/~rahtz/passivetex/).

### A brief introduction to XSL

XSL is both a transformation language and a formatting language. The XSLT transformation part lets you scan through a document's structure and rearrange its content any way you like. You can write out the content using a different set of XML tags, and generate text as needed. For example, you can scan through a document to locate all headings and then insert a generated table of contents at the beginning of the document, at the same time writing out the content marked up as HTML. XSL is also a rich formatting language, letting you apply typesetting controls to all components of your output. With a good formatting backend, it is capable of producing high quality printed pages.

An XSL stylesheet is written using XML syntax, and is itself a well-formed XML document. That makes the basic syntax familiar, and enables an XML processor to check for basic syntax errors. The stylesheet instructions use special element names, which typically begin with `xsl:` to distinguish them from any XML tags you want to appear in the output. The XSL namespace is identified at the top of the stylesheet file. As with other XML, any XSL elements that are not empty will require a closing tag. And some XSL elements have specific attributes that control their behavior. It helps to keep a good XSL reference book handy.

Here is an example of a simple XSL stylesheet applied to a simple XML file to generate HTML output.

Example 4.9. Simple XML file

    <?xml version="1.0"?>
    <document>
    <title>Using a mouse</title>
    <para>It's easy to use a mouse. Just roll it
    around and click the buttons.</para>
    </document>

Example 4.10. Simple XSL stylesheet

    <?xml version='1.0'?>
    <xsl:stylesheet
              xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version='1.0'>
    <xsl:output method="html"/>

    <xsl:template match="document">
      <HTML><HEAD><TITLE>
        <xsl:value-of select="./title"/>
      </TITLE>
      </HEAD>
      <BODY>
        <xsl:apply-templates/>
      </BODY>
      </HTML>
    </xsl:template>

    <xsl:template match="title">
      <H1><xsl:apply-templates/></H1>
    </xsl:template>

    <xsl:template match="para">
      <P><xsl:apply-templates/></P>
    </xsl:template>

    </xsl:stylesheet>

Example 4.11. HTML output

    <HTML>
    <HEAD>
    <TITLE>Using a mouse</TITLE>
    </HEAD>
    <BODY>
    <H1>Using a mouse</H1>
    <P>It's easy to use a mouse. Just roll it
    around and click the buttons.</P>
    </BODY>
    </HTML>

### XSL processing model

XSL is a template language, not a procedural language. That means a stylesheet specifies a sample of the output, not a sequence of programming steps to generate it. A stylesheet consists of a mixture of output samples with instructions of what to put in each sample. Each bit of output sample and instructions is called a template.

In general, you write a template for each element type in your document. That lets you concentrate on handling just one element at a time, and keeps a stylesheet modular. The power of XSL comes from processing the templates recursively. That is, each template handles the processing of its own element, and then calls other templates to process its children, and so on. Since an XML document is always a single root element at the top level that contains all of the nested descendent elements, the XSL templates also start at the top and work their way down through the hierarchy of elements.

Take the DocBook `<para>` paragraph element as an example. To convert this to HTML, you want to wrap the paragraph content with the HTML tags `<<p>>` and `</</p>>`. But a DocBook `<para>` can contain any number of in-line DocBook elements marking up the text. Fortunately, you can let other templates take care of those elements, so your XSL template for `<para>` can be quite simple:

    <xsl:template match="para">
      <p>
        <xsl:apply-templates/>
      </p>
    </xsl:template>

The `<xsl:template>` element starts a new template, and its `match` attribute indicates where to apply the template, in this case to any `<para>` elements. The template says to output a literal `<<p>>` string and then execute the `<xsl:apply-templates/>` instruction. This tells the XSL processor to look among all the templates in the stylesheet for any that should be applied to the content of the paragraph. If each template in the stylesheet includes an `<xsl:apply-templates/>` instruction, then all descendents will eventually be processed. When it is through recursively applying templates to the paragraph content, it outputs the `</</p>>` closing tag.

#### Context is important

Since you aren't writing a linear procedure to process your document, the context of where and how to apply each modular template is important. The `match` attribute of `<xsl:template>` provides that context for most templates. There is an entire expression language, XPath, for identifying what parts of your document should be handled by each template. The simplest context is just an element name, as in the example above. But you can also specify elements as children of other elements, elements with certain attribute values, the first or last elements in a sequence, and so on. Here is how the DocBook `<formalpara>` element is handled:

    <xsl:template match="formalpara">
      <p>
        <xsl:apply-templates/>
      </p>
    </xsl:template>

    <xsl:template match="formalpara/title">
      <b><xsl:apply-templates/></b>
      <xsl:text> </xsl:text>
    </xsl:template>

    <xsl:template match="formalpara/para">
      <xsl:apply-templates/>
    </xsl:template>

There are three templates defined, one for the `<formalpara>` element itself, and one for each of its children elements. The `match` attribute value `formalpara/title` in the second template is an XPath expression indicating a `<title>` element that is an immediate child of a `<formalpara>` element. This distinguishes such titles from other `<title>` elements used in DocBook. XPath expressions are the key to controlling how your templates are applied.

In general, the XSL processor has internal rules that apply templates that are more specific before templates that are less specific. That lets you control the details, but also provides a fallback mechanism to a less specific template when you don't supply the full context for every combination of elements. This feature is illustrated by the third template, for `formalpara/para`. By including this template, the stylesheet processes a `<para>` within `<formalpara>` in a special way, in this case by not outputting the HTML `<p>` tags already output by its parent. If this template had not been included, then the processor would have fallen back to the template specified by `match="para"` described above, which would have output a second set of `<p>` tags.

You can also control template context with XSL modes, which are used extensively in the DocBook stylesheets. Modes let you process the same input more than once in different ways. A `mode` attribute in an `<xsl:template>` definition adds a specific mode name to that template. When the same mode name is used in `<xsl:apply-templates/>`, it acts as a filter to narrow the selection of templates to only those selected by the `match` expression and that have that mode name. This lets you define two different templates for the same element match that are applied under different contexts. For example, there are two templates defined for DocBook `<listitem>` elements:

    <xsl:template match="listitem">
      <li><xsl:apply-templates/></li>
    </xsl:template>

    <xsl:template match="listitem" mode="xref">
      <xsl:number format="1"/>
    </xsl:template>

The first template is for the normal list item context where you want to output the HTML `<li>` tags. The second template is called with `<xsl:apply-templates select="$target" mode="xref"/>` in the context of processing `<xref>` elements. In this case the `select` attribute locates the ID of the specific list item and the `mode` attribute selects the second template, whose effect is to output its item number when it is in an ordered list. Because there are many such special needs when processing `<xref>` elements, it is convenient to define a mode name `xref` to handle them all. Keep in mind that mode settings do not automatically get passed down to other templates through `<xsl:apply-templates/>`.

#### Programming features

Although XSL is template-driven, it also has some features of traditional programming languages. Here are some examples from the DocBook stylesheets.

    Assign a value to a variable:
    <xsl:variable name="refelem" select="name($target)"/>

    If statement:
    <xsl:if test="$show.comments">
        <i><xsl:call-template name="inline.charseq"/></i>
    </xsl:if>

    Case statement:
    <xsl:choose>
        <xsl:when test="@columns">
            <xsl:value-of select="@columns"/>
        </xsl:when>
        <xsl:otherwise>1</xsl:otherwise>
    </xsl:choose>

    Call a template by name like a subroutine, passing parameter values and accepting a return value:
    <xsl:call-template name="xref.xreflabel">
       <xsl:with-param name="target" select="$target"/>
    </xsl:call-template>

However, you can't always use these constructs as you do in other programming languages. Variables in particular have very different behavior.

##### Using variables and parameters

XSL provides two elements that let you assign a value to a name: `<xsl:variable>` and `<xsl:param>`. These share the same name space and syntax for assigning names and values. Both can be referred to using the `$name` syntax. The main difference between these two elements is that a param's value acts as a default value that can be overridden when a template is called using a `<xsl:with-param>` element as in the last example above.

Here are two examples from DocBook:

    <xsl:param name="cols">1</xsl:param>
    <xsl:variable name="segnum" select="position()"/>

In both elements, the name of the parameter or variable is specified with the `name` attribute. So the name of the `param` here is `cols` and the name of the `variable` is `segnum`. The value of either can be supplied in two ways. The value of the first example is the text node "1" and is supplied as the content of the element. The value of the second example is supplied as the result of the expression in its `select` attribute, and the element itself has no content.

The feature of XSL variables that is odd to new users is that once you assign a value to a variable, you cannot assign a new value within the same scope. Doing so will generate an error. So variables are not used as dynamic storage bins they way they are in other languages. They hold a fixed value within their scope of application, and then disappear when the scope is exited. This feature is a result of the design of XSL, which is template-driven and not procedural. This means there is no definite order of processing, so you can't rely on the values of changing variables. To use variables in XSL, you need to understand how their scope is defined.

Variables defined outside of all templates are considered global variables, and they are readable within all templates. The value of a global variable is fixed, and its global value can't be altered from within any template. However, a template can create a local variable of the same name and give it a different value. That local value remains in effect only within the scope of the local variable.

Variables defined within a template remain in effect only within their permitted scope, which is defined as all following siblings and their descendants. To understand such a scope, you have to remember that XSL instructions are true XML elements that are embedded in an XML family hierarchy of XSL elements, often referred to as parents, children, siblings, ancestors and descendants. Taking the family analogy a step further, think of a variable assignment as a piece of advice that you are allowed to give to certain family members. You can give your advice only to your younger siblings (those that follow you) and their descendents. Your older siblings won't listen, neither will your parents or any of your ancestors. To stretch the analogy a bit, it is an error to try to give different advice under the same name to the same group of listeners (in other words, to redefine the variable). Keep in mind that this family is not the elements of your document, but just the XSL instructions in your stylesheet. To help you keep track of such scopes in hand-written stylesheets, it helps to indent nested XSL elements. Here is an edited snippet from the DocBook stylesheet file `pi.xsl` that illustrates different scopes for two variables:

     1 <xsl:template name="dbhtml-attribute">
     2 ...
     3    <xsl:choose>
     4       <xsl:when test="$count>count($pis)">
     5          <!-- not found -->
     6       </xsl:when>
     7       <xsl:otherwise>
     8          <xsl:variable name="pi">
     9             <xsl:value-of select="$pis[$count]"/>
    10          </xsl:variable>
    11          <xsl:choose>
    12             <xsl:when test="contains($pi,concat($attribute, '='))">
    13                <xsl:variable name="rest" select="substring-after($pi,concat($attribute,'='))"/>
    14                <xsl:variable name="quote" select="substring($rest,1,1)"/>
    15                <xsl:value-of select="substring-before(substring($rest,2),$quote)"/>
    16             </xsl:when>
    17             <xsl:otherwise>
    18             ...
    19             </xsl:otherwise>
    20          </xsl:choose>
    21       </xsl:otherwise>
    22    </xsl:choose>
    23 </xsl:template>

The scope of the variable `pi` begins on line 8 where it is defined in this template, and ends on line 20 when its last sibling ends.[17] The scope of the variable `rest` begins on line 13 and ends on line 15. Fortunately, line 15 outputs an expression using the value before it goes out of scope.

What happens when an `<xsl:apply-templates/>` element is used within the scope of a local variable? Do the templates that are applied to the document children get the variable? The answer is no. The templates that are applied are not actually within the scope of the variable. They exist elsewhere in the stylesheet and are not following siblings or their descendants.

To pass a value to another template, you pass a parameter using the `<xsl:with-param>` element. This parameter passing is usually done with calls to a specific named template using `<xsl:call-template>`, although it works with `<xsl:apply-templates>` too. That's because the called template must be expecting the parameter by defining it using a `<xsl:param>` element with the same parameter name. Any passed parameters whose names are not defined in the called template are ignored.

Here is an example of parameter passing from `docbook.xsl`:

    <xsl:call-template name="head.content">
       <xsl:with-param name="node" select="$doc"/>
    </xsl:call-template>

Here a template named `head.content` is being called and passed a parameter named `node` whose content is the value of the `$doc` variable in the current context. The top of that template looks like this:

    <xsl:template name="head.content">
       <xsl:param name="node" select="."/>

The template is expecting the parameter because it has a `<xsl:param>` defined with the same name. The value in this definition is the default value. This would be the parameter value used in the template if the template was called without passing that parameter.

#### Generating HTML output.

You generate HTML from your DocBook XML files by applying the HTML version of the stylesheets. This is done by using the HTML driver file `docbook/html/docbook.xsl` as your stylesheet. That is the master stylesheet file that uses `<xsl:include>` to pull in the component files it needs to assemble a complete stylesheet for producing HTML.

The way the DocBook stylesheet generates HTML is to apply templates that output a mix of text content and HTML elements. Starting at the top level in the main file `docbook.xsl`:

    <xsl:template match="/">
      <xsl:variable name="doc" select="*[1]"/>
      <html>
      <head>
        <xsl:call-template name="head.content">
          <xsl:with-param name="node" select="$doc"/>
        </xsl:call-template>
      </head>
      <body>
        <xsl:apply-templates/>
      </body>
      </html>
    </xsl:template>

This template matches the root element of your input document, and starts the process of recursively applying templates. It first defines a variable named `doc` and then outputs two literal HTML elements `<html>` and `<head>`. Then it calls a named template `head.content` to process the content of the HTML `<head>`, closes the `<head>` and starts the `<body>`. There it uses `<<xsl:apply-templates/>/>` to recursively process the entire input document. Then it just closes out the HTML file.

Simple HTML elements can generated as literal elements as shown here. But if the HTML being output depends on the context, you need something more powerful to select the element name and possibly add attributes and their values. Here is a fragment from `sections.xsl` that shows how a heading tag is generated using the `<xsl:element>` and `<xsl:attribute>` elements:

     1 <xsl:element name="h{$level}">
     2   <xsl:attribute name="class">title</xsl:attribute>
     3   <xsl:if test="$level<3">
     4     <xsl:attribute name="style">clear: all</xsl:attribute>
     5   </xsl:if>
     6   <a>
     7     <xsl:attribute name="name">
     8       <xsl:call-template name="object.id"/>
     9     </xsl:attribute>
    10     <b><xsl:copy-of select="$title"/></b>
    11   </a>
    12 </xsl:element>

This whole example is generating a single HTML heading element. Line 1 begins the HTML element definition by identifying the name of the element. In this case, the name is an expression that includes the variable `$level` passed as a parameter to this template. Thus a single template can generate `<h1>`, `<h2>`, etc. depending on the context in which it is called. Line 2 defines a `class="title"` attribute that is added to this element. Lines 3 to 5 add a `style="clear all"` attribute, but only if the heading level is less than 3. Line 6 opens an `<a>` anchor element. Although this looks like a literal output string, it is actually modified by lines 7 to 9 that insert the `name` attribute into the `<a>` element. This illustrates that XSL is managing output elements as active element nodes, not just text strings. Line 10 outputs the text of the heading title, also passed as a parameter to the template, enclosed in HTML boldface tags. Line 11 closes the anchor tag with the literal `</</a>>` syntax, while line 12 closes the heading tag by closing the element definition. Since the actual element name is a variable, it couldn't use the literal syntax.

As you follow the sequence of nested templates processing elements, you might be wondering how the ordinary text of your input document gets to the output. In the file `docbook.xsl` you will find this template that handles any text not processed by any other template:

    <xsl:template match="text()">
      <xsl:value-of select="."/>
    </xsl:template>

This template's body consists of the "value" of the text node, which is just its text. In general, all XSL processors have some built-in templates to handle any content for which your stylesheet doesn't supply a matching template. This template serves the same function but appears explicitly in the stylesheet.

#### Generating formatting objects.

You generate formatting objects from your DocBook XML files by applying the fo version of the stylesheets. This is done by using the fo driver file `docbook/fo/docbook.xsl` as your stylesheet. That is the master stylesheet file that uses `<xsl:include>` to pull in the component files it needs to assemble a complete stylesheet for producing formatting objects. Generating a formatting objects file is only half the process of producing typeset output. You also need a formatting object processor such as the Apache XML Project's FOP as described in an earlier section.

The DocBook fo stylesheet works in a similar manner to the HTML stylesheet. Instead of outputting HTML tags, it outputs text marked up with `<fo:`something`>` tags. For example, to indicate that some text should be kept in-line and typeset with a monospace font, it might look like this:

    <fo:inline-sequence font-family="monospace">/usr/man</fo:inline-sequence>

The templates in `docbook/fo/inline.xsl` that produce this output for a DocBook `<filename>` element look like this:

    <xsl:template match="filename">
      <xsl:call-template name="inline.monoseq"/>
    </xsl:template>

    <xsl:template name="inline.monoseq">
      <xsl:param name="content">
        <xsl:apply-templates/>
      </xsl:param>
      <fo:inline-sequence font-family="monospace">
        <xsl:copy-of select="$content"/>
      </fo:inline-sequence>
    </xsl:template>

There are dozens of fo tags and attributes specified in the XSL standard. It is beyond the scope of this document to cover how all of them are used in the DocBook stylesheets. Fortunately, this is only an intermediate format that you probably won't have to deal with very much directly unless you are writing your own stylesheets.

### Customizing DocBook XSL stylesheets

The DocBook XSL stylesheets are written in a modular fashion. Each of the HTML and FO stylesheets starts with a driver file that assembles a collection of component files into a complete stylesheet. This modular design puts similar things together into smaller files that are easier to write and maintain than one big stylesheet. The modular stylesheet files are distributed among four directories:

common/

  contains code common to both stylesheets, including localization data

fo/

  a stylesheet that produces XSL FO result trees

html/

  a stylesheet that produces HTML/XHTML result trees

lib/

  contains schema-independent functions

The driver files for each of HTML and FO stylesheets are `html/docbook.xsl` and `fo/docbook.xsl`, respectively. A driver file consists mostly of a bunch of `<xsl:include>` instructions to pull in the component templates, and then defines some top-level templates. For example:

    <xsl:include href="../VERSION"/>
    <xsl:include href="../lib/lib.xsl"/>
    <xsl:include href="../common/l10n.xsl"/>
    <xsl:include href="../common/common.xsl"/>
    <xsl:include href="autotoc.xsl"/>
    <xsl:include href="lists.xsl"/>
    <xsl:include href="callout.xsl"/>
    ...
    <xsl:include href="param.xsl"/>
    <xsl:include href="pi.xsl"/>

The first four modules are shared with the FO stylesheet and are referenced using relative pathnames to the common directories. Then the long list of component stylesheets starts. Pathnames in include statements are always taken to be relative to the including file. Each included file must be a valid XSL stylesheet, which means its root element must be `<xsl:stylesheet>`.

#### Stylesheet inclusion vs. importing

XSL actually provides two inclusion mechanisms: `<xsl:include>` and `<xsl:import>`. Of the two, `<xsl:include>` is the simpler. It treats the included content as if it were actually typed into the file at that point, and doesn't give it any more or less precedence relative to the surrounding text. It is best used when assembling dissimilar templates that don't overlap what they match. The DocBook driver files use this instruction to assemble a set of modules into a stylesheet.

In contrast, `<xsl:import>` lets you manage the precedence of templates and variables. It is the preferred mode of customizing another stylesheet because it lets you override definitions in the distributed stylesheet with your own, without altering the distribution files at all. You simply import the whole stylesheet and add whatever changes you want.

The precedence rules for import are detailed and rigorously defined in the XSL standard. The basic rule is that any templates and variables in the importing stylesheet have precedence over equivalent templates and variables in the imported stylesheet. Think of the imported stylesheet elements as a fallback collection, to be used only if a match is not found in the current stylesheet. You can customize the templates you want to change in your stylesheet file, and let the imported stylesheet handle the rest.

### Note

Customizing a DocBook XSL stylesheet is the opposite of customizing a DocBook DTD. When you customize a DocBook DTD, the rules of XML and SGML dictate that the first of any duplicate declarations wins. Any subsequent declarations of the same element or entity are ignored. The architecture of the DTD provides slots for inserting your own custom declarations early enough in the DTD for them to override the standard declarations. In contrast, customizing an XSL stylesheet is simpler because your definitions have precedence over imported ones.

You can carry modularization to deeper levels because module files can also include or import other modules. You'll need to be careful to maintain the precedence that you want as the modules get rolled up into a complete stylesheet.

#### Customizing with `<xsl:import>`

There is currently one example of customizing with `<xsl:import>` in the HTML version of the DocBook stylesheets. The `xtchunk.xsl` stylesheet modifies the HTML processing to output many smaller HTML files rather than a single large file per input document. It uses XSL extensions defined only in the XSL processor XT. In the driver file `xtchunk.xsl`, the first instruction is `<xsl:import href="docbook.xsl"/>`. That instruction imports the original driver file, which in turn uses many `<xsl:include>` instructions to include all the modules. That single import instruction gives the new stylesheet the complete set of DocBook templates to start with.

After the import, `xtchunk.xsl` redefines some of the templates and adds some new ones. Here is one example of a redefined template:

    Original template in autotoc.xsl
    <xsl:template name="href.target">
      <xsl:param name="object" select="."/>
      <xsl:text>#</xsl:text>
      <xsl:call-template name="object.id">
        <xsl:with-param name="object" select="$object"/>
      </xsl:call-template>
    </xsl:template>

    New template in xtchunk.xsl
    <xsl:template name="href.target">
      <xsl:param name="object" select="."/>
      <xsl:variable name="ischunk">
        <xsl:call-template name="chunk">
          <xsl:with-param name="node" select="$object"/>
        </xsl:call-template>
      </xsl:variable>

      <xsl:apply-templates mode="chunk-filename" select="$object"/>

      <xsl:if test="$ischunk='0'">
        <xsl:text>#</xsl:text>
        <xsl:call-template name="object.id">
          <xsl:with-param name="object" select="$object"/>
        </xsl:call-template>
      </xsl:if>
    </xsl:template>

The new template handles the more complex processing of HREFs when the output is split into many HTML files. Where the old template could simply output `#`object.id``, the new one outputs ``filename`#`object.id``.

#### Setting stylesheet variables

You may not have to define any new templates, however. The DocBook stylesheets are parameterized using XSL variables rather than hard-coded values for many of the formatting features. Since the `<xsl:import>` mechanism also lets you redefine global variables, this gives you an easy way to customize many features of the DocBook stylesheets. Over time, more features will be parameterized to permit customization. If you find hardcoded values in the stylesheets that would be useful to customize, please let the maintainer know.

Near the end of the list of includes in the main DocBook driver file is the instruction `<xsl:include href="param.xsl"/>`. The `param.xsl` file is the most important module for customizing a DocBook XSL stylesheet. This module contains no templates, only definitions of stylesheet variables. Since these variables are defined outside of any template, they are global variables and apply to the entire stylesheet. By redefining these variables in an importing stylesheet, you can change the behavior of the stylesheet.

To create a customized DocBook stylesheet, you simply create a new stylesheet file such as `mystyle.xsl` that imports the standard stylesheet and adds your own new variable definitions. Here is an example of a complete custom stylesheet that changes the depth of sections listed in the table of contents from two to three:

    <?xml version='1.0'?>
    <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
                    version='1.0'
                    xmlns="http://www.w3.org/TR/xhtml1/transitional"
                    exclude-result-prefixes="#default">

    <xsl:import href="docbook.xsl"/>

    <xsl:variable name="toc.section.depth">3</xsl:variable>
    <!-- Add other variable definitions here -->

    </xsl:stylesheet>

Following the opening stylesheet element are the import instruction and one variable definition. The variable `toc.section.depth` was defined in `param.xsl` with value "2", and here it is defined as "3". Since the importing stylesheet takes precedence, this new value is used. Thus documents processed with `mystyle.xsl` instead of `docbook.xsl` will have three levels of sections in the tables of contents, and all other processing will be the same.

Use the list of variables in `param.xsl` as your guide for creating a custom stylesheet. If the changes you want are controlled by a variable there, then customizing is easy.

#### Writing your own templates

If the changes you want are more extensive than what is supported by variables, you can write new templates. You can put your new templates directly in your importing stylesheet, or you can modularize your importing stylesheet as well. You can write your own stylesheet module containing a collection of templates for processing lists, for example, and put them in a file named `mylists.xsl`. Then your importing stylesheet can pull in your list templates with a `<xsl:include href="mylists.xsl"/>` instruction. Since your included template definitions appear after the main import instruction, your templates will take precedence.

You'll need to make sure your new templates are compatible with the remaining modules, which means:

- Any named templates should use the same name so calling templates in other modules can find them.

- Your template set should process the same elements matched by templates in the original module, to ensure complete coverage.

- Include the same set of `<xsl:param>` elements in each template to interface properly with any calling templates, although you can set different values for your parameters.

- Any templates that are used like subroutines to return a value should return the same data type.

#### Writing your own driver

Another approach to customizing the stylesheets is to write your own driver file. Instead of using `<xsl:import href="docbook.xsl"/>`, you copy that file to a new name and rewrite any of the `<xsl:include/>` instructions to assemble a custom collection of stylesheet modules. One reason to do this is to speed up processing by reducing the size of the stylesheet. If you are using a customized DocBook DTD that omits many elements you never use, you might be able to omit those modules of the stylesheet.

#### Localization

The DocBook stylesheets include features for localizing generated text, that is, printing any generated text in a language other than the default English. In general, the stylesheets will switch to the language identified by a `lang` attribute when processing elements in your documents. If your documents use the `lang` attribute, then you don't need to customize the stylesheets at all for localization.

As far as the stylesheets go, a `lang` attribute is inherited by the descendents of a document element. The stylesheet searches for a `lang` attribute using this XPath expression:

    <xsl:variable name="lang-attr"
             select="($target/ancestor-or-self::*/@lang
                      |$target/ancestor-or-self::*/@xml:lang)[last()]"/>

This locates the attribute on the current element or its most recent ancestor. Thus a `lang` attribute is in effect for an element and all of its descendents, unless it is reset in one of those descendents. If you define it in only your document root element, then it applies to the whole document:

    <?xml version="1.0"?>
    <!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.0//EN" "docbook.dtd">
    <book lang="fr">
    ...
    </book>

When text is being generated, the stylesheet checks the most recent `lang` attribute and looks up the generated text strings for that language in a localization XML file. These are located in the `common` directory of the stylesheets, one file per language. Here is the top of the file `fr.xml`:

    <localization language="fr">

    <gentext key="abstract"                 text="R&#x00E9;sum&#x00E9;"/>
    <gentext key="answer"                   text="R:"/>
    <gentext key="appendix"                 text="Annexe"/>
    <gentext key="article"                  text="Article"/>
    <gentext key="bibliography"             text="Bibliographie"/>
    ...

The stylesheet templates use the gentext key names, and then the stylesheet looks up the associated text value when the document is processed with that lang setting. The file `l10n.xml` (note the `.xml` suffix) lists the filenames of all the supported languages.

You can also create a custom stylesheet that sets the language. That might be useful if your documents don't make appropriate use of the `lang` attribute. The module `l10n.xsl` defines two global variables that can be overridden with an importing stylesheet as described above. Here are their default definitions:

    <xsl:variable name="l10n.gentext.language"></xsl:variable>
    <xsl:variable name="l10n.gentext.default.language">en</xsl:variable>

The first one sets the language for all elements, regardless of an element's `lang` attribute value. The second just sets a default language for any elements that haven't got a `lang` setting of their own (or their ancestors).

[14] See Formally Published CALS Standards for more information.

[15] Language codes should conform to IETF RFC 3066.

[16] The use of uppercase names here is intentional. These are not attributes that an author is ever expected to type. In XML, which is case-sensitive, using uppercase for things like this reduces the likelihood of collision with “real” attribute names in the DTD.

[17] Technically, the scope extends to the end tag of the parent of the `<xsl:variable>` element. That is effectively the last sibling.

Parsing DocBook Documents |  | Customizing DocBook

Copyright © 1999, 2000, 2001, 2002 O'Reilly & Associates, Inc. All rights reserved.