MIMEDEFANG-PROTOCOL(7)

NAME
mimedefang-protocol - Conventions used by mimedefang(8) to communicate with filter programs.

DESCRIPTION
mimedefang(8) and mimedefang-multiplexor(8) provide a simplified mechanism for hooking scripts and programs into Sendmail's milter API. The milter API is multi-threaded and written in C; mimedefang lets you write single-threaded filters written in the language of your choice. Some of the flexibility and speed of milter is sacrificed, but the ease of writing filters more than compensates for this slight loss. This manual describes how mimedefang communicates with the filter program, and gives you enough information to write your own filter program as a replacement for mimedefang.pl if you wish.

PROTOCOL OVERVIEW
The protocol is a simple file-based protocol. For each invocation of a filter, mimedefang creates a unique working directory and populates it with files. It calls the filter, which is expected to populate the working directory with more files, which communicate the scan results back to mimedefang. This simple mechanism allows you to easily write filters in scripting languages without worrying about C-level details.

FILTER INVOCATION
The filter program may be invoked in one of five ways:

filter_prog directory
    If the program is invoked with a single argument which is an absolute path name (called the working directory, the program is expected to perform filtering in that directory and then exit.

filter_prog -server
    If the program is invoked with the single argument -server, it is expected to run as a server. See SERVER MODE for details.

filter_prog -serveru
    If the program is invoked with the single argument -serveru, it is expected to run as a server. In addition, anything it prints to file descriptor 3 is used to update the "worker status" field in the multiplexor. This lets the filter inform administrators exactly what it is doing. (See the -Z option to mimedefang-multiplexor.)

filter_prog -embserver
    Similar to -server, but used by the embedded Perl code. The program should run any initialization routines and then exit. The multiplexor will subsequently call the Perl routine do_main_loop when it is time for the worker to begin running in server mode.

filter_prog -embserveru
    Similar to -embserver with the additional magic of updating the worker status from data written to file descriptor 3.

INITIAL FILE LAYOUT
When the filter begins a scan, it should change directories to the working directory. In that directory, it will find the following files.

INPUTMSG
    A file containing the complete input e-mail message, including headers.

HEADERS
    A file containing just the headers, one per line. Headers which are continued over several lines in the original message are collapsed into a single line in this file.

COMMANDS
    A file containing a list of commands. Each command is a single letter and may be followed by arguments. Each command is on its own line.

THE COMMANDS FILE
All commands have their arguments encoded as follows: All characters outside the range 33 to 126 ASCII, as well as the characters "%", "\", "'" and double-quote, are replaced by a percent sign followed by two hex digits specifying the character's numerical value. The filter must un-escape the arguments when it reads the COMMANDS file. The commands from the C to Perl filters are:

Ssender
    The sender of the message.

sesmtp_arg
    An ESMTP argument associated with the sender (such as SIZE=54432). There is one s line for each ESMTP argument.

Usubject
    The message subject.

Xmessage_id
    The Message-ID.

Rrecipient mailer host addr
    A recipient. There is one R line for each recipient. The mailer, host and addr parts of the line are the values of the Sendmail {rcpt_mailer}, {rcpt_host} and {rcpt_addr} macros if they are available, or "?" if not.

resmtp_arg
    An ESMTP argument associated with the most recent recipient (such as NOTIFY=never). There is one r line for each SMTP argument.

!   If this command is present, there are suspicious characters in the message headers.

?   If this command is present, there are suspicious characters in the message body.

Ihost_addr
    The SMTP relay host's IP address in dotted-quad notation.

iidentifier
    An identifier generated by MIMEDefang. On a given host, this identifier is very likely to be unique over a timespan of about 24 years.

Jhost_addr
    The "real" SMTP relay host's IP address in dotted-quad notation. Multi-stage MIMEDefang relays can use a special IP validation header so that even the innermost MIMEDefang relay can see the "original" relay's IP address.

Hhost_name
    The SMTP relay host name.

Eargument
    The argument to the SMTP "EHLO" or "HELO" command.

Qqid
    The message's Sendmail queue-ID.

=macro val
    Set the value of the specified Sendmail macro to val. Both macro and val are percent-encoded, but the single space character between them is not.

FILTER OPERATION
When the filter performs a scan, it can make use of all the information in the files mentioned previously. If the filter needs temporary working files, it should create a subdirectory under the working directory for its own use. In this case, you do not have to clean up your working files, because mimedefang deletes the working directory when the filter returns.

FINAL FILE LAYOUT
The filter communicates the results of the scan back to mimedefang by creating additional files in the working directory. The most important file is called RESULTS, and it contains a list of one-letter, one-line commands back to the filter. As usual, command arguments are percent-escaped. The commands from the filter back to mimedefang are:

Bcode dsn reply_text
    Bounce (reject) the message with the specified SMTP reply code, DSN code and reply text.

D   Silently discard the message and pretend it was delivered.

Tcode dsn reply_text
    Return an SMTP temporary failure code with the specified SMTP code, DSN and reply text.

C   Replace the message body. If this command is present, the file NEWBODY must contain the new message body.

Mheader_val
    Replace the MIME Content-Type header with a new value. Used to change MIME boundaries or convert non-MIME to MIME messages.

Hheader val
    Add a new header header with value val. The header should not contain a colon. Each of header and val is percent-escaped, but the single space between them is not.

Nheader index val
    Adds a new header header with value val in position index. An index of zero specifies that the new header should be prepended before all existing headers.

Iheader index val
    Replace the index'th occurrence of header with value val. The index is 1-based. The header should not contain a colon. Each of header, index and val is percent-escaped, but the single space between them is not.

Jheader index
    Delete the index'th occurrence of header.

Rrecip
    Add a new recipient recip to the message.

Srecip
    Delete recip from the list of message recipients.

fsender
    Change the envelope sender to sender. This is only supported by Sendmail 8.14.0 and higher.

F   Indicate that we have finished issuing commands. Anything after an F line is ignored.

SERVER MODE
In server mode, mimedefang-multiplexor runs the filter program continuously in a server loop. The filter program reads commands from standard input, and writes results to standard output. The filter program must exit shortly after it sees EOF on its standard input. If it does not exit within 10 seconds, it will be terminated with SIGTERM. If that still does not work, then after a further 10 seconds, it is killed with SIGKILL.

SERVER COMMANDS
    All server commands are single line commands. Each command is followed by a space-separated list of arguments; each argument is percent-encoded. The commands defined are:

ping
    Elicits a reply of "PONG" from the server.

scan queue_id dir
    Run a scan for the mail identiefied by the Sendmail queue-ID queue_id in the directory dir. The command is terminated with a newline. The server must write a newline-terminated "ok" if the scan completed successfully, or "error: msg" if something went wrong.

relayok ip_addr hostname client_port daemon_ip daemon_port
    Test whether or not to accept a connection from the specified host. The server must write "ok 1" if we will accept the connection, or "ok 0 error_message code dsn" if not. It can indicate a temporary failure by writing "ok -1 error_message code dsn". Note that even if the connection is accepted, a later scan can still reject the message based on other criteria. "ip_addr" is the IP address of the relay and "hostname" is the hostname (if it could be determined; otherwise, the IP address in square brackets).

helook ip_addr hostname helo_string client_port daemon_ip daemon_port
    Test whether or not to accept the HELO/EHLO command. The server must write "ok 1" if we will accept the mail attempt, or "ok 0 error_message code dsn" if not. "ok -1 error_message code dsn" indicates a temporary failure. helo_string is the argument to the HELO/EHLO command. The remaining arguments have the same meaning as in relayok.

senderok sender_addr ip_addr hostname helo_string dir queue_id [esmtp_args...]
    Test whether or not to accept mail from the specified sender. The server must write "ok 1" if we will accept the mail attempt, or "ok 0 error_message code dsn" if not. "ok -1 error_message code dsn" indicates a temporary failure. Note that even if the sender is accepted, a later scan can still reject the message based on other criteria. "sender_addr" is the sender's e-mail address. The "ip_addr" and "hostname" arguments are as in relayok. "helo_string" is the argument to the SMTP HELO/EHLO command. "dir" is the MIMEDefang spool directory, and "queue_id" is the Sendmail queue identifier. The optional "esmtp_args" are space-separated, percent-encoded ESMTP arguments supplied with the MAIL FROM: command.

recipok recip_addr sender_addr ip_addr hostname first_recip helo_string dir queue_id [esmtp_args...]
    Test whether or not to accept mail for the specified recipient. The server must write "ok 1" if we will accept it, or "ok 0 error_message code dsn" if not. ok -1 error_message code dsn" indicates a temporary-failure. "recip_addr" is the argument to the RCPT TO: command, and "first_recip" is the argument to the first RCPT TO: command for this message. Other arguments are as in senderok.

map map_name key
    If you are using a map socket (the -N option to mimedefang-multiplexor), then the server should look up the key key in the map map_name. The server should print a single line to standard output. The first word on the line should be one of OK, NOTFOUND, TEMP, TIMEOUT or PERM, indicating a successful lookup, absence of the key, a temporary failure, a timeout or a permanent failure, respectively. This should be followed by a space and a percent-encoded string representing the value of the key (if it was found) or an optional error message (if something went wrong.)

tick band
    The filter should run filter_tick with the specified band argument. It should print a single line to standard output: tock band

Additional Commands
    The filter can define a function filter_unknown_cmd that can extend the list of server commands. If you do this, make sure all of your commands start with an upper-case letter to avoid conflicts if more built-in commands are defined in the future.

SERVER REPLIES
    The reply codes are:

ok [return_code] [parameters]
    The operation completed successfully. Some operations have an associated return code, and possibly other parameters as well. See the source code for the gory details.

error: Message
    The operation failed. Message may give additional details.

In server mode, you should not write anything to standard output except reply codes, or the multiplexor will become confused. You should not terminate the program in server mode; simply echo an error: reply and return to the server loop. When you send a reply code back to the multiplexor, be sure to terminate it with a newline, and to flush standard output. If your program uses the Standard I/O library, standard output may not be flushed immediately, and mimedefang-multiplexor will wait forever for the filter's reply, and eventually kill the filter on the assumption it has hung up. In server mode, if the filter program receives a SIGINT signal, it must terminate. This is used by mimedefang-multiplexor to terminate workers after they have processed a given number of e-mail messages.

AUTHOR
mimedefang was written by Dianne Skoll <dfs@roaringpenguin.com>. The mimedefang home page is http://www.mimedefang.org/.

SEE ALSO
mimedefang.pl(8), mimedefang(8), mimedefang-multiplexor(8), mimedefang-filter(5)