This file documents ne 3.1.2, a free text editor for UN*X.

   Copyright (C) 1993-1998 Sebastiano Vigna.  Copyright (C) 1999-2018
Todd M. Lewis and Sebastiano Vigna.

   Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.

   Permission is granted to copy and distribute modified versions of
this manual under the conditions for verbatim copying, provided that the
entire resulting derived work is distributed under the terms of a
permission notice identical to this one.

   Permission is granted to copy and distribute translations of this
manual into another language, under the above conditions for modified
versions, except that this permission notice may be stated in a
translation approved by the Free Software Foundation.

ne's manual
*************

This file describes ne version 3.1.2, a free text editor that runs (we
hope) on almost any UN*X machine.  ne is easy to use for the beginner,
but powerful and fully configurable for the wizard, and most sparing in
its resource use.

Copyright (C) 1993-1998 Sebastiano Vigna
Copyright (C) 1999-2018 Todd M. Lewis and Sebastiano Vigna

1 Introduction
**************

ne is a full screen text editor for UN*X (or, more precisely, for
POSIX: *note Motivations and Design::).  I came to the decision to write
such an editor after getting completely sick of 'vi', both from a
feature and user interface point of view.  I needed an editor that I
could use through a 'telnet' connection or a phone line and that
wouldn't fire off a full-blown LITHP(1) operating system just to do some
editing.

   A concise overview of the main features follows:

   * three user interfaces: control keystrokes, command line, and menus;
     keystrokes and menus are completely configurable;

   * syntax highlighting;

   * full support for UTF-8 files, including multiple-column characters;

   * 64-bit file/line length;

   * simple scripting language where scripts can be generated via an
     idiotproof record/play method;

   * unlimited undo/redo capability (can be disabled with a command);

   * automatic preferences system based on the extension of the file
     name being edited or regex content matching;

   * automatic completion of prefixes using words in your documents as
     dictionary;

   * a file requester with completion features for easy file retrieval;

   * extended regular expression search and replace a' la 'emacs' and
     'vi';

   * a very compact memory model--you can easily load and modify very
     large files, even if they do not fit your core memory;

   * editing of binary files.

   ---------- Footnotes ----------

   (1) This otherwise unremarkable language is distinguished by the
absence of an 's' in its character set; users must substitute 'th'.
LITHP is said to be useful in protheththing lithtth.

2 Basics
********

Simple things should be simple.  Complex things should be possible.
(Alan Kay)

   ne's user interface is essentially a compromise between the limits
of character driven terminals and the power of GUIs.  While _real_
editing is done without ever touching a mouse, it is also true that
editing should be doable without ever touching a manual.  These two
conflicting goals can be accommodated easily in a single program if we
can offer a series of interfaces that allow for differentiated use.

   In other words, it is unlikely that an ne wizard will ever have to
activate a menu, but to become an expert user you just have to use the
menus enough to learn by heart the most important keystrokes.  A good
manual is always invaluable when one comes to configuration and esoteric
features, but few users will ever need to change ne's menus or key
bindings.

   Another important thing is that powerful features should always be
accessible, at least in part, to every user.  The average user should be
able to record his actions, replay them, and save them in a humanly
readable format for further use and editing.

   In the following sections we shall take a quick tour of ne's
features.

2.1 Terminology
===============

In this section we explain and contrast some of the terms ne uses.
Understanding these distinctions will go a long way towards making the
rest of this manual make sense.

   A "file" is a group of bytes stored on disk.  This may seem rather
obvious, but the important distinction here is that ne does not edit
files; it edits "documents".

   A "document" is what ne calls one of the "text thingies" that you
can edit.  It is a sequence of lines of text in the computer's
memory--not on disk.(1)  Documents can be created, edited, saved in
files, loaded from files, discarded, et cetera.  When a document is
loaded from or saved to a file, it remains associated with that file by
name until the document is either closed or saved to a different file.
Interactions between documents and files are handled by the commands
under the 'File' menu.  The 'Documents' menu commands only deal with
documents.  *Note Menus::.

   Internally, ne holds its documents in "buffers".  A "buffer" is a
chunk of memory in which ne holds something.  For example, each
document is held in its own buffer, as are any loaded or recorded
macros, undo records, a copy of your last deleted line of text, a copy
of all your previous responses to long input, and several other things.

   ---------- Footnotes ----------

   (1) Actually, it can be in a region of the disk used to simulate a
larger memory.  ne will switch to such a simulation whenever the
computer's memory is not sufficient for editing a file.  This means, in
particular, that out-of-memory errors can be caused by insufficient disk
space, too.

2.2 Starting
============

To start ne, just type ne and press <Return>.  If you want to edit
some specific file(s), you can put their name(s) on the command line
just after the command name, as for any UN*X command.  The screen of
your terminal will be cleared (or filled with text loaded from the first
file you specified).  You can also pipe the result of a command directly
into ne: it will be loaded and opened as the first document.  See
*note Arguments:: for other command line options.

   Writing text is pretty straightforward: if your terminal is properly
configured, every key will (should) do what you expect.  Alphabetic
characters insert text, cursor keys move the cursor, and so on.  You can
use the <Delete> and <Backspace> key to perform corrections.  If your
keyboard has an <Insert> key, you can use it to "toggle" (switch from on
to off, or vice versa) insert mode.  In general, ne tries to squeeze
everything it can from your keyboard.  Function keys and special
movement keys should work flawlessly if your terminal is properly
configured.  If not, complain to your system administrator.  If that
doesn't help, see *note Key Bindings::.

   At the bottom of the screen, you will see a line containing some
numbers and letters.  This is called the "status bar" because it reports
to you part of the internal state of the editor.  At startup, the status
bar has the following form:

      L:       1 C:       1  12% ia----pvu-t------@A* <unnamed>

(the numbers could be different, and a file name could be shown as last
item instead of '<unnamed>').  You probably already guessed that the
numbers after 'L:' and 'C:' are your cursor's line and column numbers,
respectively, whereas the percentage indicates approximately your
position in the file.  The small letters represent user flags that you
can turn on and off.  In particular, 'i' tells you that insert mode is
on, while 'p' tells that the automatic preferences system is activated.
The '*' means this buffer has not been saved.  For a thorough
explanation of the meaning of the flags on the status bar, see *note The
Status Bar::.

   Once you are accustomed to cursor movement and line editing, it is
time to press <f1> (the first function key), or in case your keyboard
does not have such a key, <Escape>.  Immediately, the "menu bar" will
appear, and the first menu will be drawn.  (If you find yourself waiting
for the menu to appear, you can press <Escape> twice in a row.)  You can
now move around menus and menu items by pressing the cursor keys.
Moreover, a lower case alphabetic key will move to the next item in the
current menu whose name starts with that letter, and an upper case
alphabetic key will move to the next menu whose name starts with that
letter.

   Moving around the menus should give you an idea of the capabilities
of ne.  If you want to save your work, you should use the 'Save As...'
item from the 'File' menu.  Menus are fully discussed in *note Menus::.
When you want to exit from the menu system, press <f1> (or <Escape>)
again.  If instead you prefer to choose a command and execute it, move
to the respective menu item and press <Return>.

   At the end of several menu items you will find strange symbols like
'^A' or <f1>.  They represent "shortcuts" for the respective menu items.
In other words, instead of activating, selecting and executing a menu
item, which can take seconds, you can simply press a couple of keys.
The symbol '^' in front of a character denotes the shortcut produced by
the <Control> key plus that character (we assume here that you are
perfectly aware of the usage of the <Control> key: it is just as if you
had to type a capital letter with <Shift>).  The descriptions of the
form <f>N represent instead function keys.  Finally, the symbol '[' in
front of a character denotes the shortcut produced by <Control> plus
<Meta> (a.k.a.  <Alt>) plus that character, _or_ <Meta> plus that
character, depending on your terminal emulator--you must check for
yourself.  Moreover, these last bindings may not work with some
terminals, in which case you can replace them with a sequence: just
press the <Escape> key followed by the letter.  A few menu items are
bound to two control sequences (just in case one does not work, or it is
impractical).

   Note that under certain conditions (for instance, while using ne
through a 'telnet' connection) some of the shortcuts might not work
because they are trapped by the operating system for other purposes
(*note Hints and Tricks::).

   Finally, we have the third and last interface to ne's features: the
"command line".  If you press '<Control>-K', or <Escape> followed by ':'
(a la 'vi'), you will be requested to enter a command to execute.  Just
press <Return> for the time being (or, if you are really interested in
this topic, *note The Command Line::).

   In the sections that follow, when explaining how to use a command we
shall usually describe the corresponding menu item.  The related
shortcut and command can be found on the menu item itself, and in *note
Menus::.

2.3 Loading and Saving
======================

The first thing to learn about an editor is how to exit.  ne has a
'CloseDoc' command that can be activated by pressing '<Control>-Q', by
choosing the 'Close' item of the 'Document' menu, or by activating the
command line with '<Control>-K', writing 'cd' and pressing <Return>.
Its effect is to close the current document without saving any
modifications.  (You will be requested to confirm your choice in case
the current document has been modified since the last save.)

   There is also a 'Quit' command, which closes all the documents
without saving any modifications, and a 'Save&Exit' ('<Meta>-X')
command, which saves the modified documents before quitting.

   This choice of shortcuts could surprise you.  Wouldn't 'Quit' be a
much better candidate for '<Control>-Q'?  Well, experience shows that
the most common operation is closing a document rather than quitting the
editor.  If there is just one document, the two operations coincide
(this is typical, for instance, when you use ne for writing electronic
mail), and if there are many documents, it is far more common to close a
single document than all the existing documents.

   If you want to load a file, you may use the 'Open' command, which can
be activated by pressing '<Control>-O', by choosing the 'Open...' item
of the 'File' menu, or by typing it on the command line (as in the
previous case).  You will be prompted with a list of files and
directories in the current working directory.  (You can tell the
directory names because they end with a slash; they will also appear in
a bold face if your terminal allows it.)  You can select any of the file
names by using the cursor keys, or any other movement key.  Pressing an
alphabetic key will move the cursor to the first entry after the cursor
that starts with the given letter.  When the cursor is positioned over
the file you want to open, press <Return>, and the file will be opened.
If instead you move to a directory name, pressing <Return> will display
the contents of that directory.

   You can also escape with <f1>, <Escape> or <Escape>-<Escape> and
manually type the file name on the command line (or escape again, and
abort the 'Open' operation).  If you escape with <Tab> instead, the file
or directory under the cursor will be copied to the input line, where
you can modify it manually.  ne also has file name completion features
activated by <Tab> (*note The Input Line::).

   When you want to save a file, just use the command 'Save'
('<Control>-S').  It will use the current document name or will ask you
for one if the current document has no name.  'SaveAs', on the other
hand, will always ask for a new name before saving the file.  'SaveAll'
will save all modified documents.  If the file you are saving a document
to has changed since you last loaded or saved it, perhaps because
another user updated it while you were editing, ne will warn you
before overwriting the file.

   If ne is interrupted by an external signal (for instance, if your
terminal crashes), it will try to save your work in some emergency
files.  These files will have names similar to your current files, but
they will have a pound sign '#' prefixed to their names.  *Note
Emergency Save::.

2.4 Editing
===========

An editor is presumably used for editing text.  If you decide not to
edit text, you probably don't want to use ne, because that's all it
does--it edits text.  It does not play 'Tetris'.  It does not evaluate
recursive functions.  It does not solve your love problems.  It just
allows you to edit text.

   The design of ne makes editing extremely natural and
straightforward.  There is nothing special you have to do to start
editing once you've started ne.  Just start typing, and the text you
type shows up in your document.

   ne provides two ways of deleting characters: the <Backspace> key
(or '<Control>-H', if you have no such key) and the <Delete> key.  In
the former case you delete the character to the left of the cursor,
while in the latter case you delete the character just under the cursor.
This is in contrast with many UN*X editors, which for unknown reasons
decide to limit your ways of destroying things--something notoriously
much funnier than creating.  (See *note DeleteChar:: and *note
Backspace::.)

   If you want to delete a line, you can use the 'DeleteLine' command,
or '<Control>-Y'.  A very nice feature of ne is that each time a
nonempty line is deleted, it is stored in a temporary buffer from which
it can be undeleted via the 'UndelLine' command or '<Control>-U'.  (See
*note DeleteLine:: and *note UndelLine::.)

   If you want to copy, cut, paste, shift or erase a block of text, you
have to set a mark.  This is done via the 'Mark' command, activated by
choosing the 'Mark Block' item of the 'Edit' menu, or by pressing
'<Control>-B' (think "block").  This command sets the invisible mark at
the current cursor position.  Whenever the mark is set, the text between
the mark and the cursor can be cut, copied or erased.  Note that by
using '<Control>-@' you can set a _vertical_ mark instead, which allows
you to mark rectangles of text.  Whenever a mark has been set, either an
'M' appears on the command line or a 'V' appears if the mark is
vertical.  If you forget where the mark is currently, you can use the
'Goto Mark' menu item of the 'Search' menu to move the cursor to it.

   The block of text you cut or copy is saved in a "clip", which you can
'Paste' somewhere else in your document, or save it to a file with the
'Save Clip...' menu item of the 'Edit' menu.  You can also load a file
directly into a clip with 'Open Clip...', and 'Paste' it anywhere.  All
such operations act on the "current clip", which is by default the clip
0.  You can change the current clip number with the 'ClipNumber'
command.  *Note ClipNumber::.

   One of the most noteworthy features of ne is its "unlimited
undo/redo" capability.  Each editing action is recorded, and can be
played back and forth as much as you like.  Undo and redo are bound to
the function keys <f5> and <f6>.

   Another interesting feature of ne is its ability to load an
unlimited number of documents.  If you activate the 'NewDoc' command
(using the 'Document' menu or the command line), a new, empty document
will be created.  You can switch between your documents with <f2> and
<f3>, which are bound to the 'PrevDoc' and 'NextDoc' commands.  If you
have a lot of documents, the 'Select...' menu item (<f4>) prompts you
with the list of names of currently loaded documents and allows you to
choose directly which to edit.  In that list, names of documents with
unsaved changes will be bold.  You can also change their relative order
in that list with the <f2> and <f3> keys.

2.5 Basic Preferences
=====================

ne has a number of "flags" that specify alternative behaviors, the
most prototypical example being the "insert" flag, which specifies
whether the text you type is inserted into the existing text or replaces
it.  You can toggle this flag with the 'Insert' menu item of the 'Prefs'
menu, or with the <Insert> key of your keyboard.  ("Toggle" means to
change the value of a flag from true to false, or from false to true;
*note Insert::.)

   Another important flag is the "free form" flag, which specifies
whether the cursor can be moved beyond the right end of each line of
text or only to existing text (a la 'vi').  Programmers usually prefer
non free form editing; text writers seem to prefer free form.  See *note
FreeForm:: for some elaboration.  The free form flag can be set with the
'Free Form' menu item of the 'Prefs' menu.

   At this point, we suggest you explore by trial and error the other
flags of the 'Prefs' menu, or try the 'Flags' command (*note Flags::),
which explains all the flags and the commands that operate on them.  We
prefer spending a few words discussing "automatic preferences" or
"autoprefs", and "default preferences" or "defprefs".

   Having many flags ensures a high degree of flexibility, but it can
turn editing into a nightmare if you have to turn on and off dozens of
flags for each different kind of file you edit.  ne's solution is to
load your default preferences whenever ne is run before loading any
file, then additionally set your stated preferences automatically for
each "file type" as files are loaded.  A file's type is determined by
the "extension" of its file name, that is, the last group of letters
after the last dot.  For instance, the extension of 'ne.texinfo' is
'texinfo', the extension of 'source.c' is 'c', and the extension of
'my.txt' is 'txt'.

   Thus, when you select the 'Save Def Prefs' menu item or the
'SaveDefPrefs' command, a special preferences file named '.default#ap'
is saved.  In addition to other preferences, this file also includes a
small set of preferences which are global to ne rather than specific
to particular document types.  These preferences are: 'FastGUI',
'RequestOrder', 'StatusBar' and 'VerboseMacros'; *note FastGUI::, *Note
RequestOrder::, *Note StatusBar::, and *Note VerboseMacros::.  These
extra preferences are not saved by the 'SaveAutoPrefs' command.

   By contrast, whenever you select the 'Save AutoPrefs' menu item, ne
saves the flags of your current document to be used when you load other
files with the same extension.  These "autoprefs" are saved in a file in
your '~/.ne' directory.  This file has the same name as the extension of
the current document with '#ap' appended to it.  It contains all the
commands necessary to recreate your current document's flag settings.
Whenever you open a file with this file name extension, ne will
automagically recreate your preferred flag settings for that file type.
(There is a flag that inhibits the process; *note AutoPrefs::.)

   Similar to preference flags, the current syntax definition is
specific to the current document type, so it also is saved in autoprefs
files by the 'SaveAutoPrefs' command or 'Save AutoPrefs' menu; it is not
saved in the '.default#ap' file.

   Note that a preferences file--whether '.default#ap' or an AutoPrefs
file-- is just a macro (as described in the following section).  Thus,
it can be edited manually if necessary.

   Some files have no extension, but the file type can be discerned by
simple examination.  Consider for example a file named 'example' which
contains XML. You may reasonably expect it to be treated as an '.xml'
file rather than a generic file.  For the purposes of applying automatic
preferences and syntax definitions, ne provides a mechanism for
overriding a wrong or missing extension with a "virtual extension" based
on a document's contents.  You do this by creating a '~/.ne/.extensions'
file which is fully described in the *note Virtual Extensions:: section.

2.6 Basic Macros
================

Very often, the programmer or the text writer has to repeat some complex
editing action over a series of similar blocks of text.  This is where
"macros" come in.

   A "macro" is a stored sequence of commands.  Any sequence of commands
you find yourself repeating is an excellent candidate for being made
into a macro.  You could create a macro by editing a document that only
contains valid ne commands and saving it, but by far the easiest way
to create a macro is to have ne record your actions.  ne allows you
to record macros and then play them (execute the commands they contain)
many times.  You can save them on disk for future use, edit them, or
bind them to any key.  You could even reconfigure each key of your
keyboard to play a complex macro if you wanted to.

   ne can have any number of named macros loaded at the same time.  It
can also have one unnamed macro in its "current macro" buffer.  The
named macros are typically loaded from disk files, while the current
macro buffer is where your recorded macro is held before you save it or
record over it.

   Recording a macro is very simple.  The keystroke '<Control>-T' starts
and stops recording a macro.  When you start recording a macro, ne
clears the "current macro" buffer and starts recording all your actions
(with a few exceptions).  You can see that you are recording a macro if
an 'R' appears on the status bar.  After you stop the recording process
(again using '<Control>-T'), you can play the macro with the 'Play Once'
item of the 'Macros' menu or with the <f9> key.  If you want to repeat
the action many times, the 'Play' command allows you to specify a number
of times to repeat the macro.  You can always interrupt the macro's
execution with '<Control>-\'.

   A recorded macro has no name.  It's just an anonymous sequence of
commands in the "current macro" buffer, and it will go away when you
exit ne or record another macro.  If you want to save your recorded
macro for future use, you can give it a name and save it with the 'Save
Macro...' menu item or the 'SaveMacro' command.  The macro is saved as a
regular text file in your current directory by default or whatever
directory you specify when prompted for the macro's name.  If you save
it in your '~/.ne' directory then it will be easy to access it later
from any other directory.  The 'Open Macro...' menu item and the
'OpenMacro' command load a macro from a file into the current macro
buffer just as if you had just 'Record'ed it.

   The current setting of your 'VerboseMacros' flag determines whether
long or abbreviated command names are used when saving a macro.  For
your convenience, 'SaveMacro' will also convert sequences of
'InsertChar' commands into single--usually much more readable--
'InsertString' commands, but only if all the inserted characters are
simple printable characters, and only if there are no subsequent 'Undo'
commands or macro invocations.

   Any macro can be loaded from a file and played with the 'Play
Macro...' menu item or the 'Macro' command.  (This won't modify the
recorded anonymous macro that may be in the "current macro" buffer;
'OpenMacro' does that.)  Useful macros can be permanently bound to a
keystroke as explained in *note Key Bindings::.  Moreover, whenever a
command line does not specify one of ne's built in commands, it is
assumed to specify the name of a macro to execute.  Thus, you can
execute macros just by typing their file names.  Include a path if the
macro file's directory is different from your current directory or your
'~/.ne' directory.

   If the first attempt to open a macro fails, ne checks for a macro
with the given name in your '~/.ne' directory.  This allows you to
program simple extensions to ne's language.  For instance, all
automatic preferences macros--which are just specially named macros that
contain only commands to set preferences flags--can be executed just by
typing their names.  For example, if you have an automatic preference
for the 'doc' extension for example, you can set ne's flags exactly as
if you had loaded a file ending with '.doc' by typing the command
'doc#ap'.

   In general, it is a good idea to save frequently used macros in
'~/.ne' so that you can invoke them by name without specifying a path
regardless of your current directory.  On the other hand, if you have a
macro that is customized for one document or a set of documents that you
store in one directory, then you might want to save the macro in that
directory instead.  If you do, then you would want to 'cd' to that
directory before you start ne so that you can access that macro
without specifying a path.

   If your macro has the same name as one of ne's built-in commands,
you can only access it with the 'Macro NAME' command.  Built-in command
names are always searched before the ne command interpreter looks for
macros.

   The system administrator may make some macros available from the
'macros' subdirectory of ne's global directory.  *Note Arguments::.

   Since loading a macro each time it is invoked would be a rather slow
and expensive process, once a macro has been executed it is cached
internally.  Subsequent invocations of the macro will use the cached
version.

*Warning:* while path and file names are case sensitive when initially
loading macros, loaded macro names are _not_ case sensitive or path
sensitive.  ne only caches the file name of an already loaded macro,
not the path, and uses a case insensitive comparison when resolving
command names.  As such, if you invoke '~/foobar/MyMacro', ne
remembers it with the case-insensitive name 'mymacro'; a subsequent call
for '/usr/MYMACRO' will instead find and use the cached version of
'~/foobar/MyMacro'.  You can clear the cache by using the 'UnloadMacros'
command.  *Note UnloadMacros::.

   The behaviour of macros may vary with different preferences.  If the
user changes the 'AutoIndent' and 'WordWrap' flags, for example, new
lines and new text may not appear in the same way they would have when a
macro was recorded.  Good general purpose macros avoid such problems by
using the 'PushPrefs' command first.  This preserves the user's
preferences.  Then they set any preferences that could affect their
behaviour.  Once that is taken care of they get on with the actual work
for which they were intended.  Finally, they use the 'PopPrefs' command
to restore the user's preferences.  Note that if a macro is stopped
before it restores the preferences (either by the user pressing
'<Control>-\' or by a command failing) then dealing with the changed
preferences falls to the user.

   Any changes made to a document by a macro are recorded just as if you
had entered the commands yourself.  Therefore you can use the 'Undo'
command to roll back those changes one at a time.  This can be useful
especially when developing macros, but you may want to be able to undo
all the changes made by a macro with a single 'Undo' command.  The
'AtomicUndo' command makes this possible.  If you add 'AtomicUndo +' at
the start of your macro and 'AtomicUndo -' at the end, then the 'Undo'
and 'Redo' commands will handle all changes made by your macro
atomically, i.e., as if they had been made by a single command, even if
your macro calls other macros which could themselves contain matching
'AtomicUndo +' and 'AtomicUndo -' commands.  *Note AtomicUndo::.

   Finally, any line in a macro that starts with a non-alphabetical
character is considered a comment, so you can add comments to a macro by
starting a line with '#'.

2.7 More Advanced Features
==========================

2.7.1 UTF-8 support
-------------------

ne can load and manipulate UTF-8 files transparently, in particular on
systems that provide UTF-8 I/O. *Note UTF-8 Support::.

2.7.2 Bookmarks
---------------

It often happens that you have to browse through a file, switching
frequently between a small number of positions.  In this case, you can
use "bookmarks".  There are up to ten bookmarks per document, each
designated by a single digit, with the default being '0'.  You can set
them with the 'SetBookmark' command, and you can return to any set
bookmark with the 'GotoBookmark' command.  Also, ne sets an automatic
bookmark (designated by '-') at your current position in a document
whenever you use the 'GotoBookmark' command.  You can use a
'GotoBookmark -' command to return to the location of the previous
'GotoBookmark' command.  Doing so will reset the automatic bookmark, so
that subsequent 'GotoBookmark -' commands will switch between those two
locations.  The special parameters '+1' and '-1' indicate the next or
previous set bookmark in conjunction with 'GotoBookmark' and
'UnsetBookmark', but reference the next or previous unset bookmark when
used with 'SetBookmark'.  A sequence of 'GotoBookmark +1' commands lets
you easily cycle through all your set bookmarks.  Finally, the special
parameter '?' causes 'SetBookmark' and 'GotoBookmark' to prompt you for
a bookmark designation.  This prompt includes an indication of which
bookmarks are already set for the current document.  *Note
SetBookmark::, *note GotoBookmark::, and *note UnsetBookmark::.  Note
that in the default configuration no key binding is assigned to these
commands.  If you use them frequently, you may want to change the key
bindings.  *Note Key Bindings::.

2.7.3 Automatic Completion
--------------------------

The 'AutoComplete' command helps you extend a given prefix with matching
words from your open documents.  You can specify the 'AutoCompete'
command and prefix on the command line, or you can enter the prefix
directly into your document and activate the 'AutoComplete' command.
With the cursor at the right end of your prefix, activate the
'AutoComplete' command by entering either the <Escape>-<Tab> or the
<Escape>-<I> key sequence, or the '<Control>-<META>-<I>' key
combination, or by selecting 'AutoComplete' from the 'Extras' menu.

   If the prefix can be extended unambiguously, the extension will be
immediately inserted into your document (this is the case, for instance,
if only one word matches the prefix), and a message will tell you
whether the extension is an actual word or just the longest possible
extension (for instance, if you expand 'fo' and your document contains
'foobar' and 'foofoo' then the partial match will be 'foo').  Otherwise,
ne presents you with a list of all matching words: choose the one you
want and press <Return>, to select it; otherwise, press <f1>, <Escape>
or <Escape>-<Escape> to cancel the completion operation.

   The current state of the 'CaseSearch' flag determines whether the
prefix match is case sensitive.  Any matching words which only exist in
other open documents but not the current one are displayed in bold with
an asterisk; think of that as a warning that if you select one of these
bold words you will introduce a new word into your current document.
Plain words already exist somewhere in your current document.  *Note
AutoComplete::, and *note CaseSearch::.

2.7.4 Automatic Bracket Matching
--------------------------------

Unless you tell it not to (with the 'AutoMatchBracket' command), ne
will highlight any recognized bracket that matches the bracket your
cursor is on if that matching bracket is currently visible on your
screen.  Recognized bracket pairs are '{}', '()', '[]', '<>', and '`''.
*Note AutoMatchBracket::.

2.7.5 MS-DOS files
------------------

ne will detect automagically the presence of MS-DOS line terminators
(CR/LFs) and set the CR/LF flag.  When the file will be saved, the
terminators will be restored correctly.  You can change this behaviour
using the 'PreserveCR' and 'CRLF' commands.  *Note PreserveCR::, and
*note CRLF::.

2.7.6 Binary files
------------------

ne allows a simplified form of "binary editing".  If the binary flag
is set, only NULLs are considered newlines when loading or saving.
Thus, binary files can be safely loaded, modified and saved.  Inserting
a new line or joining two lines has the effect of inserting or deleting
a NULL. Be careful not to mismatch the state of the binary flag when
loading and saving the same file.

2.7.7 File requester
--------------------

The 'NoFileReq' command deactivates the file requester.  It is intended
for "tough guys" who always remember the names of their files and can
type them at the speed of light (maybe with the help of the completer,
which is activated by the <Tab> key; *note The Input Line::).

2.7.8 Executing UN*X commands
-----------------------------

There are three ways to execute UN*X commands from within ne.  The
'System' command can run any UN*X command; you will get back into ne
as soon as the command execution terminates.  *Note System::.  The
'Through' ('<Meta>-T') command (which can be found in the 'Edit' menu),
however, is much more powerful; it cuts the current block, passes it as
standard input to any UN*X command, and pastes the command's output at
the current cursor position.  This provides a neat way to pass a part of
your document through one of UN*X's many "filter commands" (commands
that read from standard input and write to standard output, e.g.,
'sort').  *Note Through::.  Finally, you can use the 'Suspend'
('<Control>-Z') command to temporarily stop ne and return to your
command shell.  *Note Suspend::.

2.7.9 Advanced key bindings
---------------------------

ne allows you to associate any keystroke with any command, both
built-in commands (with or without parameters) and macros.  These
associations are refered to as "key bindings", which you define in your
'~/.ne/.keys' file.  The 'KeyCode' command allows you to see the key
code ne sees in response to any key or key combination on your
keyboard.  It also shows the command string currently associated with
that key code.  This is described in *note Key Bindings::.

   The following chapters provide an exhaustive list of the remaining
features of ne.  *Note Reference::.

3 Reference
***********

In this chapter we shall methodically overview each part of ne.  It is
required reading for becoming an expert user because some commands and
features are not available through menus.

3.1 Arguments
=============

The main arguments you can give to ne are the names of files you want
to edit.  They will be loaded into separate documents.  If you specify
'--help' anywhere on the command line, a simple help text describing
ne's arguments will be printed.

   The '+N' option causes ne to advance to the Nth line of the next
document loaded.  This option is fairly common among editors and text
display programs like 'vi' and 'less'.  The N itself is optional.
Without it, a bare '+' on the command line causes ne to advance to the
last line of the first document.  You can specify a line and column as
'+N,M'.  Any non-digit can be used to separate the N from the M.  As it
only affects the next document loaded, it can appear multiple times on
the command line.

   The '--binary' option causes ne to load the next document in binary
mode.  Binary mode treats the normal line termination characters as any
other character and only breaks lines on NULL characters.  Like '+N,M',
'--binary' only affects the next document loaded, and it can appear
multiple times on the command line.  See *note Binary::.

   The '--read-only' option causes ne to load the next named file into
a read-only document.  You can still 'Save' (*note Save::) a read-only
document to a file if the file's permissions allow it, but you can't
modify a read-only document without taking special action such as
turning off the read-only flag first.  The '--read-only' option only
affects the next document loaded, so it can appear multiple times on the
command line.  A document's read-only flag is automatically set when a
file is loaded if the corresponding file is not writable (as determined
by the 'access()' system call) regardless of whether the '--read-only'
option is used.  See *note ReadOnly::.

   The '--no-config' option skips the reading of the key bindings and
menu configuration files (*note Configuration::).  This is essential if
you are experimenting with a new configuration and you make mistakes in
it.

   The '--prefs EXTENSION' option makes ne load a specified set of
automatic preferences, that is, those associated with the provided
extension, instead of the default ones, before loading the first file.
It can be useful, for instance, when piping a file into ne or when
reading from named pipes, as in those cases there is no file extension
from which ne can guess the correct preferences.  Note that
preferences are cloned from the current document when a new document is
created, so if you open a number of files without extension this option
will propagate to all of them.

   The '--macro FILENAME' option specifies the name of a macro that will
be started just after all documents have been loaded.  A typical macro
would move the cursor to a certain line.

   The '--keys FILENAME' option and the '--menus FILENAME' option
specify a name different from the default one ('.keys' and '.menus',
respectively) for the key bindings and the menu configuration files.
Note that ne searches for these files first in the current directory,
and then in your '~/.ne' directory.

   The '--ansi' and the '--no-ansi' options manage ne's built-in ANSI
sequences.  Usually ne tries to retrieve from your system some
information that is necessary to handle your terminal.  If for some
reason this is impossible, you can ask ne to use a built-in set of
sequences that will work on many terminals using the '--ansi' option (to
be true, ne can be even compiled so that it uses directly the built-in
set, but you need not know this).  If you want to be sure (usually for
debugging purposes) that ne is not using the built-in set, you can
specify '--no-ansi'.

   The '--no-syntax' option disables ne's normal syntax highlighting
capability.  For most editing situations, this would be unnecessary, but
for extremely large files it may be helpful.  Syntax highlighting incurs
small memory usage and processor overhead penalties for each line of
text.  The '--no-syntax' option eliminates that overhead.  Note that
files longer than ten million bytes will have syntax highlighting
disabled by default, but it is possible to re-enable it.  *Note Syntax
Highlighting::.

   The '--utf8' and '--no-utf8' options can be used to force or inhibit
UTF-8 I/O, overriding the choice imposed by the system locale.  Note,
however, that in general it is more advisable to set the 'LANG'
environment variable to a locale supporting UTF-8 (you can usually see
the locale list with 'locale -a').  *Note UTF-8 Support::.

   If you need to open a file whose name starts with '--', you can put
'--' before the filename, which will skip command recognition for the
next word.

   You can use I/O redirection to pipe the output of other commands into
your first document.  For example,

       ls -l | ne file1.txt --read-only file2.txt

   will open three documents: an unnamed document containing the output
of the 'ls -l' command, the contents of 'file1.txt', and the contents of
'file2.txt' with the read-only flag set.

   It's possible to apply the '--binary', '--read-only', and '+N,M'
options to the piped unnamed document by referencing it as a single '-'.
Only the first such file name will reference the piped document (even if
it isn't the first file name on the command line).  Subsequent dashes
will be considered normal file names.  If you want the first dash to be
treated like a normal file instead of a reference to the piped document,
prefix the dash with '--'.  Consider these two command lines:

       ls -l | ne --read-only +3,8 - file1.txt -
       ls -l | ne file1.txt -- - --read-only +3,8 -
       ls -l | ne --binary file1.txt --read-only -- -

   All three of these commands open ne with three documents: the
output of the 'ls -l' command will be in the first unnamed document, the
contents of 'file1.txt' will be in the second document, while the third
document will contain the contents of the file '-' (or an empty document
with that name if there is no such file).  The first and second commands
do exactly the same thing: the unnamed first document is marked
read-only and the cursor is positioned on line 3 column 8, while the
other two document are opened normally.  In the case of the third
command, 'file1.txt' is opened in binary mode, the document named '-' is
marked read-only, while the first, unnamed, document--which is not
referenced on the command line--with the output from 'ls -l' is opened
normally.

   Finally, ne has a "global directory" where the system administrator
can store macros, default preferences, and syntax definitions for all
users of the system.  The location of this directory is defined when
ne is built, but you can override it by creating and exporting the
'NE_GLOBAL_DIR' environment variable prior to invoking ne.  If you
load no files when you start ne, or if you invoke the 'About' command,
it will display a splash screen.  The last line on that screen shows the
global directory ne is using, if it exists, or an error message
otherwise.

3.2 The Status Bar
==================

The last line of the screen, the "status bar", is reserved by ne for
displaying some information about its internal state.  Note that on most
terminals it is physically impossible to write a character on the last
column of the last line, so we are not stealing precious editing space.

   The status bar looks more or less like this:

     L:      31  C:      25   12% iabcwfpvurtBMRPC*@8       20 /foo/bar

   The numbers after 'L:' and 'C:' are the line and column of the cursor
position.  The first line and the first column are both number 1.  Then,
ne shows the percentage of lines before the current line (it will be
0% on the first line, and 100% on the last line).

   Following that are a sequence of letters or dashes.  These indicate
the status of a series of flags which we shall look at later.

   The hexadecimal digits following the flags give the code for the
character at the cursor, and are displayed optionally (*note HexCode::).
If your cursor is at or beyond the right end of the current line, the
code disappears.

   The file name appearing after the character code is the file name of
the current document.  The left end of very long file names may be
truncated to keep the right end visible.  Of course, ne is keeping
track internally of the complete file name.  It is used by the 'Save'
command and as the default input for the 'SaveAs' command.  *Note
Save::, and *note SaveAs::.

   The displayed line and column numbers, the percentage indicator and
the character code change when the cursor moves.  This fact can really
slow down cursor movement if you are using ne through a slow
connection.  If you find this to be a problem, it is a good idea to turn
off the status bar using either the 'Status Bar' menu item of the
'Prefs' menu or the 'StatusBar' command.  *Note StatusBar::.
Alternatively you can turn on the fast GUI mode using either the 'Fast
GUI' menu item of the 'Prefs' menu or the 'FastGUI' command (*note
FastGUI::).  In fast GUI mode the status bar is not draw in reverse, so
some additional optimization can be done when refreshing it.

   The letters after the line and column number represent the status of
the flags associated with the current document.  Flags that are off
display a '-' instead of a letter.  Each flag also has an associated
command.  The 'Flags' command describes them all when you don't have
this manual handy.  Here's the list in detail:

'i'
     appears if the insert flag is true.  *Note Insert::.

'a'
     appears if the auto indent flag is true.  *Note AutoIndent::.

'b'
     appears if the back search flag is true.  *Note SearchBack::.

'c'
     appears if the case sensitive search flag is true.  *Note
     CaseSearch::.

'w'
     appears if the word wrap flag is true.  *Note WordWrap::.

'f'
     appears if the free form flag is true.  *Note FreeForm::.

'p'
     appears if the automatic preferences flag is true.  *Note
     AutoPrefs::.

'v'
     appears if the verbose macros flag is true.  *Note VerboseMacros::.

'u'
     appears if the undo flag is true.  *Note DoUndo::.

'r'
     appears if the read only flag is true.  *Note ReadOnly::.

't/T'
     appears as 't' if the tabs flag is true, 'T' if the shifttabs flag
     is also true.  *Note Tabs::, *note ShiftTabs::.

'd'
     appears if the deltabs flag is true.  *Note DelTabs::.

'B'
     appears if the binary flag is true.  *Note Binary::.

'!'
     appears in place of 'B' when not in binary mode and the last line
     of the document is not empty (i.e.  the last line of the saved file
     would not be terminated).

'M'
     appears if you are currently marking a block.  *Note Mark::.

'V'
     can appear in place of 'M' if you are currently marking a vertical
     block.  *Note MarkVert::.

'R'
     appears if you are currently recording a macro.  *Note Record::.

'P'
     appears if the PreserveCR flag is true.  *Note PreserveCR::.

'C'
     appears if the CRLF flag is true.  *Note CRLF::.

'@'
     appears if UTF-8 I/O is enabled.  *Note UTF8IO::.

'A/8/U'
     denotes the current document encoding--US-ASCII, 8-bit or UTF-8.
     *Note UTF8::.

'*'
     appears if the document has been modified since the last save, or
     if the 'Modified' command was issued to set this flag.  *Note
     Modified::.

   Note that sometimes ne needs to communicate some message to you.
The message is usually written over the status bar, where it stays until
you do something.  Any action such as moving the cursor or inserting a
character will restore the normal status bar.

3.3 The Input Line
==================

The bottom line of the screen is usually occupied by the status bar
(*note The Status Bar::).  However, whenever ne prompts you for a
command or file name or asks you to confirm some action, the bottom line
becomes the "input line".  You can see this because a "prompt" is
displayed at the start of the line, suggesting what kind of input is
required.  (Prompts always ends with a colon, so it is easy to
distinguish them from "error messages", which overwrite the status bar
from time to time.)

   ne uses the input line in two essentially different ways:
"immediate" input and "long" input.  You can easily distinguish between
these two modes because in immediate input mode the cursor is not on the
input line, while for long input mode it is.

   Immediate input is used whenever ne needs you to specify a simple
choice that can be expressed by one character (for example, 'y' or 'n').
When you type the character, ne will immediately accept and use your
input.  Most immediate inputs display a character just after the prompt.
This character is the default response, which is used if you just press
the <Return> key.  Note that immediate input is not case sensitive.
Moreover, if a yes/no choice is requested, _anything_ other than 'y'
will be considered a negative response.

   Long input is used when a whole string is required.  You can enter
and edit your response to long inputs like a line of text in a document.
Most key bindings related to line editing work on the command line
exactly as they do in a document.  This is true even of custom key
bindings.  Just edit as you are used to.  Moreover, the you can paste
the first line of the current clip using the keystroke that is bound to
the 'Paste' command, usually '<Control>-V'.  If your long input is
longer than the screen width, the input line scrolls to accommodate your
text so you can input very long lines even on small monitors.  (There is
a limit of 2048 characters.)

   The default response to a long input is the response you gave to the
previous long input.  Your _first action_ when presented with a long
input will either erase the default response or allow you to edit it.
If the first thing you type is a printing character, the default
response will be erased.  Anything else (cursor movement for example)
will allow you to edit it further.

   Long input also lets you access your previous long input responses
with the up and down cursor commands (or with wider movement commands,
such as start/end of file, page up/down, etc.).  Once you find a
previous input you like, you can edit it further.  Long input history is
not document specific, so you can recall any of your inputs regardless
of which document was active when you entered it.  Furthermore, ne
saves the most recent long inputs in '~/.ne/.history' when you end your
ne session and loads them again when you begin another ne session.

   When asked to input a number, you can choose between decimal, octal
and hexadecimal notation in the standard way: a number starting with '0'
is considered in octal, a number starting with '0x' is considered in
hexadecimal, and in all other cases decimal base is assumed.

   Whenever a file name is requested, you can type a partial file name
and "complete" it with the <Tab> key.  ne will scan the current
directory (or the directory that you partially specified) and search for
the files matching your partial suggestion.  The longest prefix common
to all such files will be copied to the input line (ne will beep if no
completion exists).  It's easier done than said--just try.  If you press
<Tab> again, you will be brought into the file requester: only the files
and directories matching your partial specification will appear, and as
usual you will be able to navigate and select a file or escape.  *Note
The Requester::.  Note that ne considers the _last word_ on the input
line the partial file name to complete, no matter where the cursor is
currently (you must use quotes if the name contains spaces, even if it
is the only item on the input line).

   Complete long input with the <Return> key.  You can cancel a long
input using <f1>, <Escape>, <Escape>-<Escape> or any key that is bound
to the 'Escape' command.  The effect will vary depending on what your
were requested to input, but the execution of the command requiring the
input will stop.

3.4 The Command Line
====================

The command line is a typical (topical) way of controlling an editor on
character driven systems.  It has some advantages over menus in terms of
access speed, but it is not desirable from a user interface point of
view.  ne has a command line that should be used whenever strange
features have to be accessed, or whenever you want to use a command that
you are familiar with and that is not bound to any key.

   You have two ways to access the command line: by activating the menu
and typing a colon (':') or by typing '<Control>-K' (or any key that is
bound to the 'Exec' command; *note Exec::).  The first method will work
regardless of any key binding configuration if you activate the menus
with the <Escape> key since that key cannot be reconfigured.  Of course,
there is also a menu entry that does the same job.

   Once you activate the command line, the status bar will turn into an
input line (*note The Input Line::) with a 'Command:' prompt waiting for
you to do a long input.  In other words, you can now type any command
(possibly with arguments), and when you press <Return>, the command will
be executed.

   If the command you specify does not appear in ne's internal tables,
it is considered to be the name of a macro.  *Note Basic Macros::, for
details.

3.5 The Requester
=================

In various situations, ne needs to ask you to choose one string from
several (where "several" can mean a lot).  For this kind of event, the
"requester" is issued.  The requester displays the strings in as many
columns as possible and lets you move with the cursor from one string to
another.  The strings can fill many screens, which are handled as
consecutive pages.  Most navigation keys work exactly as in normal
editing.  This is true even of custom key bindings.  Thus, for instance,
you can page up and down through the list with '<Control>-P' and
'<Control>-N' (in the standard keyboard configuration).

   A special feature is bound to printing characters: the requester
progressively advances to entries that match the characters you type
without regard to case.  You can use <Backspace> to incrementally undo
your matched characters.  This progressive matching works in two modes
which you can switch between on the fly with either the <Insert> or
<Delete> key.  In the default mode, the cursor indicating your current
selection simply advances to the next matching entry (if there is one).
In the other mode, all entries which don't match the characters you've
entered are removed from the list so you only see the matching entries.
The <Backspace> key incrementally returns them to your list as your
match becomes less specific.  You can switch between the two modes as
often as you wish while searching for your desired entry.  This lets you
quickly navigate large lists to get to the entries you really want.

   One example of a requester is the list of commands appearing when you
use the 'Help' command.  Another is the list of document words matching
a prefix given to the 'AutoComplete' command.  A third example is the
file requester that ne issues whenever a file operation is going to
take place.  In this case, pressing <Return> while on a directory name
will enter that directory and refresh the requester with that
directory's entries.  Note also that, should the requester take too long
to appear, you can interrupt the directory scanning with '<Control>-\'.
However, the listing will likely be incomplete.

   Yet another example of a requester is the list of documents you
currently have open.  This requester is displayed when you use the
'Select...' entry from the 'Documents' menu, or invoke the 'SelectDoc'
command with the <f4> key.  Documents with unsaved changes will be bold
(if your terminal supports bold) and marked with an asterisk.  These
documents are generally listed in the order they were opened.  However,
in this requester you can reorder these documents by using the keys
bound to the 'NextDoc' and 'PrevDoc' commands, usually <f2> and <f3>.
Any document reordering and selection will only take effect if you exit
the requester with the <Return> key.  You can also close unmodified
documents without leaving the 'SelectDoc' requester by using the key
bound to the 'CloseDoc' command, usually '<Control>-Q'.  Closing the
last document this way will cause ne to exit.

   Regardless of the type of requester, you can confirm your selection
with <Return> just as with the input line (*note The Input Line::), or
you can escape the requester without making a selection with <f1> or the
<Escape> key (or whatever has been bound to the 'Escape' command).

   Moreover, if you are selecting a file name through the requester
there is a third possibility: by escaping with the <Tab> key, the file
or directory name that the cursor is currently on will be copied to the
input line.  This allows you to choose an existing name with <Tab> and
modify the name on the input line before hitting <Return>.

   Note that there are two items that always appear at the top of a file
requester: './' and '../'.  The first one represents the current
directory and can be used to force a reread of the directory.  The
second one represents the parent directory and can be used to move up by
one directory level.

   The path to file names and directories selected through the requester
will be relative to the current directory, i.e.  the directory you were
in when you invoked ne.  The exception is when you've entered a path
on the command line that starts with a </>, then hit <Tab> to invoke the
requester.  In that case the path eventually returned by the requester
will be an absolute path.  (Note that you can change the current
document's name from relative to absolute or absolute to relative with
the 'NameConvert' command either on the command line or from the
'Extras' menu.)

   All requesters present their selections by default in "row major
order," which means the second string is on the same row as the first
but to its right, at the top of the second column, and so on across each
row before filling in the next row down.  If you prefer your lists
displayed in "column major order"--the first, second, and third strings
are in the same column and each column is filled before starting on the
next column to the right--then use the 'RequestOrder' command to switch
that preference.  The setting will be stored in your default preferences
the next time you save them.  See *note Preferences Commands::.

3.6 Syntax Highlighting
=======================

Syntax highlighting is particularly useful for programming language text
or other types of documents which have a strictly defined syntax.
Colors indicate different syntactic categories of text according to the
syntax definition in use.

   Syntax definitions are stored in separate files.  ne comes with a
suite of syntax definitions for many popular programming languages and
other common text file types.  When you load a file, ne selects the
appropriate syntax definition as determined by the filename extension in
much the same way autoprefs are loaded.  (See *note Virtual Extensions::
for ways to override a file's extension based on file contents.)  It
also contains a built-in table of common filename extensions that share
the same syntax definitions.  For example, both 'cbl', and 'cob' files
use the 'cobol' definition.  See the *note Syntax:: command for the
complete list of built-in extension mappings.

   If there is no matching syntax definition for the filename extension,
or if the document you are editing has no filename yet, or you just want
to try a different syntax definition, you can load and use the syntax
definition of your choice with the 'Syntax' command.  It takes the
syntax name as a parameter.  For example, the name "'c'" works for C
syntax files with extensions '.c', '.h', 'c++', etc.  ne searches for
the specified syntax definition file in the 'syntax' subdirectory of
your '~/.ne' directory first.  If not found there, ne then looks in
the 'syntax' subdirectory of ne's global directory for the syntax
definition file.  *Note Arguments::.

   With no parameter, the 'Syntax' command prompts you for a syntax to
load, the offered default being the currently loaded syntax if there is
one.  Use the <Tab> key at that prompt to get a list of available syntax
recognizers.

   One syntax definition you may find useful for any type of text file
is called simply 'tabs'.  It highlights the TABs in your text so you can
distinguish them from regular spaces.

   You can create your own syntax definitions and store them in your
'~/.ne/syntax' directory (actually, modifying the colors of an existing
definition is much easier; *note Hints and Tricks::).  A complete
explanation of syntax specifications is beyond the scope of this
document, but the existing definition files should prove to be useful
examples.  In particular, the 'syntax/c.jsf' file contains some
particularly helpful comments.  Syntax definition files have a '.jsf'
extension.  Do not include that extension when using the 'Syntax'
command.

   Your own syntax recognizers will be preferred over the global
recognizers.  If you use the <Tab> key at the syntax prompt to display
the requester of extant recognizers, yours will be marked with an
asterisk and bold if your terminal supports that.

   Syntax highlighting does incur a slight penalty in memory used per
line of text, and it also consumes some CPU resources.  For small to
medium sized files you'll probably never notice.  But for extremely
large files--on the order of the size of your system's RAM--the
difference could be significant.  If you invoke ne with the
'--no-syntax' parameter, ne will disable the syntax highlighting
mechanism entirely, freeing up the memory and CPU otherwise consumed.
(Note that if you are that tight on memory, you may need to disable the
undo buffer as well.  *Note DoUndo::.)  On the other hand, ne will
silently disable syntax highlighting on files longer than ten million
bytes, but you can force it using the 'Syntax' command.

   Note that there is a basic difference between these two cases: when
you use the '--no-syntax' parameter, the additional memory is not
allocated at all, and syntax highlighting cannot be enabled without
restarting ne.  On the contrary, the automatic disabling for long
files keeps only ne from computing the actual highlighting, and it can
be overriden as explained above.

   ne uses code from another editor--the GPL-licensed 'joe'--for its
syntax highlighting capabilities.  Because of this fact, the syntax
definition files are identical, even to the '.jsf' extension, which is
an acronym for "Joe's Syntax File".  It's possible that if both 'joe'
and ne are installed on your system that they share the same syntax
file directory.

3.7 Menus
=========

ne's menus are extremely straightforward.  The suggested way of
learning their use is by trial and error, with a peek here and there at
this manual when some doubts arise.

   You activate menus with the <f1> key, or in case your keyboard does
not have such a key, <Escape>, <Escape>-<Escape> or any key that is
bound to the 'Escape' command.  Move around the menus pressing with the
cursor keys, the <Page Up> and <Page Down> keys (which move to the first
or last menu item in a menu), and the <Home> and <End> keys (which move
to the first or last menus).  You can also move around menus and menu
items by pressing the alphabetic keys; a lower case letter will move to
the first item in the current menu whose name starts with the given
letter; an upper case letter will move to the first menu whose name
starts with the given letter.

   If you've activated the menus and you want to switch immediately to
the command line, press the <:> key.  The menus will clear and you'll
find yourself on the command line.  *Note The Command Line::.

   Each menu item of ne's standard menu corresponds to a single
command.  In explaining what each menu item allows you to do, we shall
simply refer you to the section that explains the command relative to
the menu item.

   If you plan to change ne's menu (*note Changing Menus::), you
should take a look at the file 'default.menus' that comes with ne's
distribution.  It contains a complete menu configuration that clones the
standard one.

3.7.1 File
----------

The File menu contains standard items that allow loading and saving
files.  Quitting ne (which doesn't save changes) or exiting ne
(which does save changes) is also possible.

'Open...'
     *Note Open::.

'Open New...'
     *Note OpenNew::.

'Save'
     *Note Save::.

'Save As...'
     *Note SaveAs::.

'Save All'
     *Note SaveAll::.

'Quit Now'
     *Note Quit::.

'Save&Exit'
     *Note Exit::.

'About'
     *Note About::.

3.7.2 Documents
---------------

The Documents menu contains commands that create new documents, destroy
them, and browse through them.

'New'
     *Note NewDoc::.

'Clear'
     *Note Clear::.

'Close'
     *Note CloseDoc::.

'Next'
     *Note NextDoc::.

'Prev'
     *Note PrevDoc::.

'Select...'
     *Note SelectDoc::.

3.7.3 Edit
----------

The Edit menu contains commands related to cutting and pasting text.

'Mark Block'
     *Note Mark::.

'Cut'
     *Note Cut::.

'Copy'
     *Note Copy::.

'Paste'
     *Note Paste::.

'Erase'
     *Note Erase::.

'Through'
     *Note Through::.

'Delete Line'
     *Note DeleteLine::.

'Delete EOL'
     *Note DeleteEOL::.

'Mark Vert'
     *Note MarkVert::.

'Paste Vert'
     *Note PasteVert::.

'Open Clip...'
     *Note OpenClip::.

'Save Clip...'
     *Note SaveClip::.

3.7.4 Search
------------

The Search menu contains commands related to searching for specific
contents or locations within a document.

'Find...'
     *Note Find::.

'Find RegExp...'
     *Note FindRegExp::.

'Replace...'
     *Note Replace::.

'Replace Once...'
     *Note ReplaceOnce::.

'Replace All...'
     *Note ReplaceAll::.

'Repeat Last'
     *Note RepeatLast::.

'Goto Line...'
     *Note GotoLine::.

'Goto Col...'
     *Note GotoColumn::.

'Goto Mark...'
     *Note GotoMark::.

'Match Bracket'
     *Note MatchBracket::.

'Set Bookmark'
     *Note SetBookmark::.

'Unset Bookmark'
     *Note UnsetBookmark::.

'Goto Bookmark'
     *Note GotoBookmark::.

3.7.5 Macros
------------

The Macros menu contains commands related to creating and using macros.

'Record'
     *Note Record::.

'Stop'
     *Note Record::.

'Replace...'
     *Note Replace::.

'Play Once'
'Play Many...'
     *Note Play::.

'Play Macro...'
     *Note Macro::.

'Open Macro...'
     *Note OpenMacro::.

'Save Macro...'
     *Note SaveMacro::.

3.7.6 Extras
------------

This menu contains a few special items that don't fit in obvious ways
into other menus.

'Exec...'
     *Note Exec::.

'Suspend'
     *Note Suspend::.

'Help...'
     *Note Help::.

'Refresh'
     *Note Refresh::.

'Undo'
     *Note Undo::.

'Redo'
     *Note Redo::.

'Undel Line'
     *Note UndelLine::.

'Center'
     *Note Center::.

'Shift Right'
'Shift Left'
     *Note Shift::.

'Paragraph'
     *Note Paragraph::.

'Adjust View'
'Center View'
     *Note AdjustView::.

'ToUpper'
     *Note ToUpper::.

'ToLower'
     *Note ToLower::.

'Capitalize'
     *Note Capitalize::.

3.7.7 Navigation
----------------

The Navigation menu contains commands related moving around in a
document.

'Move Left'
     *Note MoveLeft::.

'Move Right'
     *Note MoveRight::.

'Line Up'
     *Note LineUp::.

'Line Down'
     *Note LineDown::.

'Prev Page'
     *Note PrevPage::.

'Next Page'
     *Note NextPage::.

'Page Up'
     *Note PageUp::.

'Page Down'
     *Note PageDown::.

'Start Of File'
     *Note MoveSOF::.

'End Of File'
     *Note MoveEOF::.

'Start Of Line'
     *Note MoveSOL::.

'End Of Line'
     *Note MoveEOL::.

'Top Of Screen'
     *Note MoveTOS::.

'Bottom Of Screen'
     *Note MoveBOS::.

'Incr Up'
     *Note MoveIncUp::.

'Incr Down'
     *Note MoveIncDown::.

'Prev Word'
     *Note PrevWord::.

'Next Word'
     *Note NextWord::.

3.7.8 Prefs
-----------

The Prefs menu contains commands related to setting, storing, and using
your preferred document flags.

'Tab Size...'
     *Note TabSize::.

'Tabs as Spaces'
     *Note Tabs::.

'Insert/Over'
     *Note Insert::.

'Free Form'
     *Note FreeForm::.

'Status Bar'
     *Note StatusBar::.

'Hex Code'
     *Note HexCode::.

'Fast GUI'
     *Note FastGUI::.

'Word Wrap'
     *Note WordWrap::.

'Right Margin'
     *Note RightMargin::.

'Auto Indent'
     *Note AutoIndent::.

'Request Order'
     *Note RequestOrder::.

'Preserve CR'
     *Note PreserveCR::.

'Save CR/LF'
     *Note CRLF::.

'Load Prefs...'
     *Note LoadPrefs::.

'Save Prefs...'
     *Note SavePrefs::.

'Load AutoPrefs'
     *Note LoadAutoPrefs::.

'Save AutoPrefs'
     *Note SaveAutoPrefs::.

'Save Def Prefs'
     *Note SaveDefPrefs::.

3.8 Regular Expressions
=======================

Regular expressions are a powerful way of specifying complex search and
replace operations.  ne supports the full regular expression syntax on
US-ASCII and 8-bit documents, but has to impose a restriction on
character sets when searching in UTF-8 text.  *Note UTF-8 Support::.

3.8.1 Syntax
------------

The following section is taken (with minor modifications) from the GNU
regular expression library documentation and is Copyright (C) Free
Software Foundation.

   A regular expression describes a set of strings.  The simplest case
is one that describes a particular string; for example, the string 'foo'
when regarded as a regular expression matches 'foo' and nothing else.
Nontrivial regular expressions use certain special constructs so that
they can match more than one string.  For example, the regular
expression 'foo|bar' matches either the string 'foo' or the string
'bar'; the regular expression 'c[ad]*r' matches any of the strings 'cr',
'car', 'cdr', 'caar', 'cadddar' and all other such strings with any
number of 'a''s and 'd''s.

   Regular expressions have a syntax in which a few characters are
special constructs and the rest are "ordinary".  An ordinary character
is a simple regular expression which matches that character and nothing
else.  The special characters are '$', '^', '.', '*', '+', '?', '[', ']'
, '(', ')' and '\'.  Any other character appearing in a regular
expression is ordinary, unless a '\' precedes it.

   For example, 'f' is not a special character, so it is ordinary, and
therefore 'f' is a regular expression that matches the string 'f' and no
other string.  (It does _not_ match the string 'ff'.)  Likewise, 'o' is
a regular expression that matches only 'o'.

   Any two regular expressions A and B can be concatenated.  The result
is a regular expression that matches a string if A matches some amount
of the beginning of that string and B matches the rest of the string.

   As a simple example, we can concatenate the regular expressions 'f'
and 'o' to get the regular expression 'fo', which matches only the
string 'fo'.  Still trivial.

   Note: special characters are treated as ordinary ones if they are in
contexts where their special meanings make no sense.  For example,
'*foo' treats '*' as ordinary since there is no preceding expression on
which the '*' can act.  It is poor practice to depend on this behaviour;
better to quote the special character anyway, regardless of where is
appears.

   The following are the characters and character sequences that have
special meaning within regular expressions.  Any character not mentioned
here is not special; it stands for exactly itself for the purposes of
searching and matching.

'.'
     is a special character that matches anything except a newline.
     Using concatenation, we can make regular expressions like 'a.b',
     which matches any three-character string which begins with 'a' and
     ends with 'b'.

'*'
     is not a construct by itself; it is a suffix, which means the
     preceding regular expression is to be repeated as many times as
     possible.  In 'fo*', the '*' applies to the 'o', so 'fo*' matches
     'f' followed by any number of 'o''s.

     The case of zero 'o''s is allowed: 'fo*' does match 'f'.

     '*' always applies to the _smallest_ possible preceding expression.
     Thus, 'fo*' has a repeating 'o', not a repeating 'fo'.

'+'
     '+' is like '*' except that at least one match for the preceding
     pattern is required for '+'.  Thus, 'c[ad]+r' does not match 'cr'
     but does match anything else that 'c[ad]*r' would match.

'?'
     '?' is like '*' except that it allows either zero or one match for
     the preceding pattern.  Thus, 'c[ad]?r' matches 'cr' or 'car' or
     'cdr', and nothing else.

'[ ... ]'
     '[' begins a "character set", which is terminated by a ']'.  In the
     simplest case, the characters between the two form the set.  Thus,
     '[ad]' matches either 'a' or 'd', and '[ad]*' matches any string of
     'a''s and 'd''s (including the empty string), from which it follows
     that 'c[ad]*r' matches 'car', et cetera.

     Character ranges can also be included in a character set, by
     writing two characters with a '-' between them.  Thus, '[a-z]'
     matches any lower-case letter.  Ranges may be intermixed freely
     with individual characters, as in '[a-z$%.]', which matches any
     lower case letter or '$', '%' or period.

     Note that the usual special characters are not special any more
     inside a character set.  A completely different set of special
     characters exists inside character sets: ']', '-' and '^'.  As '\'
     is not special inside character sets, you cannot use the shortcuts
     '\s' or '\w' there.

     To include a ']' in a character set, you must make it the first
     character.  For example, '[]a]' matches ']' or 'a'.  To include a
     '-', you must use it in a context where it cannot possibly indicate
     a range: that is, as the first character, or immediately after a
     range.

     Note that when searching in UTF-8 text, a character set may contain
     US-ASCII characters only.

'[^ ... ]'
     '[^' begins a "complement character set", which matches any
     character except the ones specified.  Thus, '[^a-z0-9A-Z]' matches
     all characters _except_ letters and digits.  Also in this case,
     when searching in UTF-8 text a complemented character set may
     contain US-ASCII characters only.

     '^' is not special in a character set unless it is the first
     character.  The character following the '^' is treated as if it
     were first (it may be a '-' or a ']').

'^'
     is a special character that matches the empty string - but only if
     at the beginning of a line in the text being matched.  Otherwise it
     fails to match anything.  Thus, '^foo' matches a 'foo' that occurs
     at the beginning of a line.

'$'
     is similar to '^' but matches only at the end of a line.  Thus,
     'xx*$' matches a string of one or more 'x''s at the end of a line.

'\'
     has two functions: it quotes the above special characters
     (including '\'), and it introduces additional special constructs.

     Because '\' quotes special characters, '\$' is a regular expression
     that matches only '$', and '\[' is a regular expression that
     matches only '[', and so on.

     For the most part, '\' followed by any character matches only that
     character.  However, there are several exceptions: characters
     which, when preceded by '\', are special constructs.  Such
     characters are always ordinary when encountered on their own.

'|'
     specifies an alternative.  Two regular expressions A and B with '|'
     in between form an expression that matches anything that either A
     or B will match.

     Thus, 'foo|bar' matches either 'foo' or 'bar' but no other string.

     '|' applies to the largest possible surrounding expressions.  Only
     a surrounding '( ... )' grouping can limit the grouping power of
     '|'.

'( ... )'
     is a grouping construct that serves three purposes:

       1. To enclose a set of '|' alternatives for other operations.
          Thus, '(foo|bar)x' matches either 'foox' or 'barx'.

       2. To enclose a complicated expression for the postfix '*' to
          operate on.  Thus, 'ba(na)*' matches 'bananana' et cetera,
          with any (zero or more) number of 'na''s.

       3. To mark a matched substring for future reference.

     This last application is not a consequence of the idea of a
     parenthetical grouping; it is a separate feature that happens to be
     assigned as a second meaning to the same '( ... )' construct
     because there is no conflict in practice between the two meanings.
     Here is an explanation of this feature:

'\DIGIT'
     After the end of a '( ... )' construct, the matcher remembers the
     beginning and end of the text matched by that construct.  Then,
     later on in the regular expression, you can use '\' followed by
     DIGIT to mean "match the same text matched the DIGIT'th time by the
     '( ... )' construct."  The '( ... )' constructs are numbered in
     order of commencement in the regexp.

     The strings matching the first nine '( ... )' constructs appearing
     in a regular expression are assigned numbers 1 through 9 in order
     of their beginnings.  '\1' through '\9' may be used to refer to the
     text matched by the corresponding '( ... )' construct.

     For example, '(.+)\1' matches any non empty string that is composed
     of two identical halves.  The '(.+)' matches the first half, which
     may be anything non empty, but the '\1' that follows must match the
     same exact text.

'\b'
     matches the empty string, but only if it is at the beginning or end
     of a word.  Thus, '\bfoo\b' matches any occurrence of 'foo' as a
     separate word.  '\bball(s|)\b' matches 'ball' or 'balls' as a
     separate word.

'\B'
     matches the empty string, provided it is _not_ at the beginning or
     end of a word.

'\<'
     matches the empty string, but only if it is at the beginning of a
     word.

'\>'
     matches the empty string, but only if it is at the end of a word.

'\s'
     matches any white-space character in US-ASCII. These are <tab>,
     '<Control>-J' (line feed), '<Control>-k' (vertical tab),
     '<Control>-L' (form feed), '<Control>-M' (carriage return), and
     space.

'\w'
     matches any word-constituent character.  These are US-ASCII
     letters, numbers and the underscore, independently of the document
     encoding.

'\W'
     matches any character that is not a word-constituent.

3.8.2 Replacing regular expressions
-----------------------------------

Also the replacement string has some special feature when doing a
regular expression search and replace.  Exactly as during the search,
'\' followed by DIGIT stands for "the text matched the DIGIT'th time by
the '( ... )' construct in the search expression".  Moreover, '\0'
represent the whole string matched by the regular expression.  Thus, for
instance, the replace string '\0\0' has the effect of doubling any
string matched.

   Another example: if you search for '(a+)(b+)', replacing with
'\2x\1', you will match any string composed by a series of 'a''s
followed by a series of 'b''s, and you will replace it with the string
obtained by moving the 'a' in front of the 'b''s, adding moreover 'x'
inbetween.  For instance, 'aaaab' will be matched and replaced by
'bxaaaa'.

   Note that the backslash character can escape itself.  Thus, to put a
backslash in the replacement string, you have to use '\\'.

3.9 Automatic Preferences
=========================

Automatic preferences let you set up a custom configuration that is
automatically used whenever you open a file with a given extension.  For
instance, you may prefer a TAB size of three when editing C sources, but
eight could be more palatable when writing electronic mail.

   The use of autoprefs is definitely straightforward.  You simply use
the 'Save AutoPrefs' menu item (or the 'SaveAutoPrefs' command; *note
SaveAutoPrefs::) when the current document has the given extension and
the current configuration suits your tastes.  The internal state of a
series of options will be recorded as a macro containing commands that
reproduce the current configuration.  The macro is then saved in the
'~/.ne' directory (which is created if necessary) with the name given by
the extension, postfixed with '#ap'.  Thus, the C sources automatic
preferences file will be named 'c#ap', the one for TeX files 'tex#ap',
and so on.

   Macros are generated with short or long command names depending on
the status of the verbose macros flag.  *Note VerboseMacros::.

   Automatic preferences files are loaded and executed whenever a file
with a known extension is opened.  Note that you can manually edit such
files, and even insert commands, but any command that does something
other than setting a flag will be rejected, and an error message will be
issued.

3.10 Emergency Save
===================

When ne is interrupted by an abnormal event (for instance, the crash
of your terminal), it will try to save all unsaved documents in its
current directory.  Named documents will have their names prefixed with
a '#'.  Unnamed documents will be given names made up of hexadecimal
numbers obtained by some addresses in memory that will make them unique.

3.11 UTF-8 Support
==================

ne can manipulate UTF-8 files and supports UTF-8 when communicating
with the user.  At startup, ne fetches the system locale description,
and checks whether it contains the string 'utf8' or 'utf-8'.  In this
case, it starts communicating with the user using UTF-8.  This behaviour
can be modified either using a suitable command line option (see *note
Arguments::), or using *note UTF8IO::.  This makes it possible to
display and read from the keyboard a wide range of characters.

   Independently of the input/output encoding, ne keeps track of the
encoding of each document.  ne does not try to select a particular
coding on a document, unless it is forced to do so, for instance because
a certain character is inserted.  Once a document has a definite
encoding, however, it keeps it forever.

   More precisely, every document may be in one of three _encoding
modes_: US-ASCII, when it is entirely composed of US-ASCII characters;
8-bit, if it contains also other characters, but it is not UTF-8
encoded; and finally, UTF-8, if it is UTF-8-encoded.

   The behaviour of ne in US-ASCII and 8-bit mode is similar to
previous versions: each byte in the document is considered a separate
character.

   There are, however, two important differences: first, if I/O is not
UTF-8 encoded, _any_ encoding of the ISO-8859 family will work
flawlessly, as ne merely reads bytes from the keyboard and displays
bytes on the screen.  On the contrary, in the case of UTF-8 input/output
ne must take a decision as to which encoding is used for non-UTF-8
documents, and presently this is hardwired to ISO-8859-1.  Second, 8-bit
documents use localized casing and character type functions.  This means
that case-insensitive searches or case foldings will work with, say,
Cyrillic characters, provided that your locale is set correctly.

   In UTF-8 mode, instead, ne interprets the bytes in the document in
a different way--several bytes may encode a single character.  The whole
process is completely transparent to the user, but if you really want to
look at the document content, you can switch to 8-bit mode (see *note
UTF8::).

   For most operations, UTF-8 support should be transparent.  However,
in some cases, in particular when mixing documents with different
encodings, ne will refuse to perform certain operations because of
incompatible encodings.

   The main limitation of UTF-8 documents is that when searching for a
regular expression in a UTF-8 text, character sets may only contain
US-ASCII characters (see *note Regular Expressions::).  You can, of
course, partially emulate a full UTF-8 character set implementation
specifying the possible alternatives using '|' (but you have no ranges).

4 Commands
**********

Everything ne can do is specified through a command.  Commands can be
manually typed on the command line, bound to a key, to a menu item, or
grouped into macros for easier manipulation.  If you want to fully
exploit the power of ne, you will be faced sooner or later with using
commands directly.

4.1 General Guidelines
======================

Every command in ne has a long and a short name.  Except in a very few
cases, the short name is given by two or three letters that are the
initials of the words that form the long name.  For instance,
'SearchBack' has short name 'SB', 'SaveDefPrefs' has the short name
'SDP', and 'AdjustView''s short name is 'AV'.  There are some exceptions
however.  The most frequently used commands such as 'Exit' have
one-letter short names ('X').  Also some commands use a different short
name to avoid clashes with a more common command's short name.  For
example, 'StatusBar''s short name is 'ST' rather than 'SB' to avoid
clashes with 'SearchBack''s short name.

   A command always has at most one argument.  This is a chosen
limitation that allows ne's parsing of commands and macros to be very
fast.  Moreover, it nullifies nearly all problems related to delimiters,
escape characters, and the like.  The unique argument can be a number, a
string, or a flag modifier.  You can easily distinguish these three
cases even without this manual by looking at what the 'Help' command
says about the given command.  Note that when a command's argument is
enclosed in square brackets, it is optional.

   Strings are general purpose arguments.  Numbers are used to modify
internal parameters, such as the size of a TAB.  A flag modifier is an
optional number that is interpreted as follows:

   * 0 means clearing the flag;

   * 1 (or any positive number) means setting the flag;

   * no number means toggling the flag.

   Thus, 'StatusBar 1' will activate that status bar, while 'I' will
toggle insert/overstrike.  This design choice is due to the fact that
most of the time during interactive editing you need to _change_ a flag.
For instance, you may be in insert mode and you want to overstrike, or
vice versa.  Absolute settings (those with a number) are useful
essentially for macros.  It is reasonable to use the fastest approach
for the most frequent interactive event.  When a number or a string is
required and the argument is optional, most of the time you will be
prompted to type the argument on the command line.

   As for the input line, for numeric arguments you can choose between
decimal, octal and hexadecimal notation in the standard way: a number
starting with '0' is considered in octal, a number starting with '0x' is
considered in hexadecimal, and in all other cases decimal base is
assumed.

   When a number represents how many times ne should repeat an action,
it is always understood that the command will terminate when the
conditions for applying it are no longer true.  For instance, the
'Paragraph' command accepts the number of paragraphs to format.  But if
not enough paragraphs exists in the text, only the available ones will
be formatted.

   This easily allows performing operations on an entire document by
specifying preposterously huge numbers as arguments.  'ToUpper
200000000' will make all the words in the document upper case.  (At
least, one would hope so!)  Note that this is much faster than recording
a macro with the command 'ToUpper' in it and playing it many times
because in the former case the command has to be parsed just one time.

   In any case, if a macro or a repeated operation takes too long, you
can stop it using the interrupt key ('<Control>-\').

   To handle situations such as an argument string starting with a
space, ne implements a simple mechanism whereby you can enclose any
string argument in double quotes.  If the first non-blank character
after the command and last character of the command line are double
quotes, the quotes will be removed and whatever is left will be used as
the string argument.  For example, the 'Find' command to find a space
could be entered on the command line or in a macro as 'Find " "'.  The
only case needing special treatment is when a string starts and ends
with double quotes.  The command 'Find ""quote""' would locate the next
occurrence of the string '"quote"' (including the double quotes).
However, 'Find onequote"' wouldn't require special treatment because the
command argument doesn't both start and end with a double quote.

4.2 File Commands
=================

These commands allow opening and saving files.  They all act in the
context of the current document (i.e., the document displayed when the
command is issued).

4.2.1 Open
----------

Syntax: 'Open [FILENAME]'
Abbreviation: 'O'

loads the file specified by the FILENAME string into the current
document.

   If the optional FILENAME argument is not specified, the file
requester is opened, and you are prompted to select a file.  (You can
inhibit the file requester opening by using the 'NoFileReq' command; see
*note NoFileReq::.)

   If you escape from the file requester, you can input the file name on
the command line, the default being the current document name, if
available.

   If the current document is marked as modified at the time the command
is issued, you have to confirm the action.

4.2.2 OpenNew
-------------

Syntax: 'OpenNew [FILENAME]'
Abbreviation: 'ON'

is the same as 'Open', but loads the file specified by the FILENAME
string into a new document.  See *note Open::.

4.2.3 Save
----------

Syntax: 'Save'
Abbreviation: 'S'

saves the current document using its default file name.

   If the current document is unnamed, the file requester will open and
you will be prompted to select a file.  (You can inhibit the file
requester opening by using the 'NoFileReq' command; see *note
NoFileReq::.)

   If you escape from the file requester, you can input the file name on
the command line.

   If the file has been modified since the current document was loaded
or last saved (perhaps by another user), ne will warn you before
overwriting the updated file.

4.2.4 SaveAs
------------

Syntax: 'SaveAs [FILENAME]'
Abbreviation: 'SA'

saves the current document using the specified string as the file name.

   If the optional FILENAME argument is not specified, the file
requester will open and you will be prompted to select a file.  (You can
inhibit the file requester opening by using the 'NoFileReq' command; see
*note NoFileReq::.)

   If you escape from the file requester, you can enter the file name on
the input line, the default being the current document name, if
available.

   If the file has been modified since the current document was loaded
or last saved (perhaps by another user), ne will warn you before
overwriting the updated file.

4.2.5 SaveAll
-------------

Syntax: 'SaveAll'
Abbreviation: 'SL'

saves all modified documents.  If any modified documents cannot be
saved, the action is suspended and an error message is issued.  Note
that only named documents can be saved, so 'SaveAll' will report an
error if you have any modified unnamed documents, or if any of the
modified documents' corresponding files have been updated since they
were loaded or last saved.

4.3 Document Commands
=====================

These commands allow manipulation of the circular list of documents in
ne.

4.3.1 Quit
----------

Syntax: 'Quit'
Abbreviation: 'Q'

closes all documents and exits.  If any documents are modified, you have
to confirm the action.

4.3.2 Exit
----------

Syntax: 'Exit'
Abbreviation: 'X'

saves all modified documents, closes them and exits.  If any documents
cannot be saved, the action is suspended and an error message is issued
and no documents are closed.  Note that only named documents can be
saved, so 'Exit' will report an error if you have any modified unnamed
documents.  Like 'SaveAll', 'Exit' will not save a document if its
corresponding file has been modified since the document was loaded or
last saved, in which case an error is reported and no documents are
closed.

4.3.3 NewDoc
------------

Syntax: 'NewDoc'
Abbreviation: 'N'

creates a new, empty, unnamed document that becomes the current
document.  The position of the document in the document list is just
after the current document.  The preferences of the new document are a
copy of the preferences of the current document.

4.3.4 Clear
-----------

Syntax: 'Clear'
Abbreviation: 'CL'

destroys the contents of the current document and of its undo buffer.
Moreover, the document becomes unnamed.  If your current document is
marked as modified, you have to confirm the action.

4.3.5 CloseDoc
--------------

Syntax: 'CloseDoc'
Abbreviation: 'CD'

closes the current document.  The document is removed from ne's list
and, if it is the only existing document, ne exits.  If the document
was modified since it was last saved, you have to confirm the action.

4.3.6 NextDoc
-------------

Syntax: 'NextDoc'
Abbreviation: 'ND'

sets as current document the next document in the document list.

4.3.7 PrevDoc
-------------

Syntax: 'PrevDoc'
Abbreviation: 'PD'

sets as current document the previous document in the document list.

4.3.8 SelectDoc
---------------

Syntax: 'SelectDoc'
Abbreviation: 'SD'

displays a requester containing the names of all the documents in
memory.  Your cursor will be on your current document's name, and
documents with unsaved changes will be indicated with asterisks (and
bold if your terminal supports that).  You select whichever document you
want to become the current document by moving your cursor to its name
and hitting <Return>..

   While the list of documents is displayed, you can close unmodified
documents with your 'CloseDoc' key ('<Control>-Q'), and you can alter
their relative order using your 'NextDoc' and 'PrevDoc' keys (<f2> and
<f3>), which have the effect of swapping your currently selected
document with the next or previous document in the list, respectively.

   If you escape from the requester, the requester goes away, you are
returned to your original current document (unless you closed it!), and
no reordering of documents takes place.

   'SelectDoc' is especially useful if you have a large number of
documents open or if you want to quickly see which documents contain
unsaved changes.  See *note NextDoc::, and *note PrevDoc::.

4.4 Clip Commands
=================

These commands control the clipping system.  A "clip" is a snippet of
text separate from any document, which you can save to a file or insert
into a document.  You can select text in a document and copy it to a
clip, optionally deleting it from your text.  You can also load text
directly from a file into a clip.  ne can have any number of clips,
which are distinguished by an integer.  Most clip commands act on the
current clip, which can be selected with 'ClipNumber'.  Clips can be
copied and pasted in two ways--normally (as lines of text) or vertically
(as a rectangular block of characters).

   Note that by using the 'Through' command you can automatically pass a
(possibly vertical) block of text through any filter (such as 'sort'
under UN*X).

4.4.1 Mark
----------

Syntax: 'Mark [0|1]'
Abbreviation: 'M'

sets the mark at the current position or cancels the previous mark.  The
mark and cursor together define the range of text over which clips
('Cut', 'Copy', 'Erase') and left and right shifts operate .

   If you invoke 'Mark' with no arguments, it will set the mark.  If you
specify 0 or 1, the mark will be canceled or set to the current
position, respectively.  A capital 'M' appears on the status bar, if the
mark is active.

4.4.2 MarkVert
--------------

Syntax: 'MarkVert [0|1]'
Abbreviation: 'MV'

is the same as 'Mark', but the region manipulated by the cut/paste
commands is the rectangle having as vertices the cursor and the mark.
If you invoke 'MarkVert' with no arguments, it will set the mark.  If
you specify 0 or 1, the mark will be canceled or set to the current
position, respectively.  Moreover, a capital 'V', rather than a capital
'M', will appear on the status bar.

   For example, if you have the following text:
        aaaBbbccc
        aaabbbccc
        aaabbbCcc
and you set a vertical mark at 'B' then move the cursor to 'C', you can
cut or copy all of the 'B's.

   If you have made a vertical cut or copy, it's very likely you will
want to use 'PasteVert' rather than the usual 'Paste' to reinsert the
text in a rectangle.  See *note PasteVert::.

4.4.3 Copy
----------

Syntax: 'Copy [N]'
Abbreviation: 'C'

copies the contents of the characters lying between the cursor and the
mark into the clip specified by the optional numeric argument, the
default clip being the current clip, which can be set with the
'ClipNumber' command; see *note ClipNumber::.  If the current mark was
vertical, the rectangle of characters defined by the cursor and the mark
is copied instead.

4.4.4 Cut
---------

Syntax: 'Cut [N]'
Abbreviation: 'CU'

acts just like 'Copy', but also deletes the block being copied.

4.4.5 Paste
-----------

Syntax: 'Paste [N]'
Abbreviation: 'P'

pastes the contents of specified clip into the current document at the
cursor position.  If you don't specify the clip number, the current clip
is used; Specify which clip is current with *note ClipNumber::.

4.4.6 PasteVert
---------------

Syntax: 'PasteVert [N]'
Abbreviation: 'PV'

vertically pastes the contents of the specified clip, the default being
the current clip.  Each line of the clip is inserted on consecutive
lines at the horizontal cursor position.

4.4.7 Erase
-----------

Syntax: 'Erase'
Abbreviation: 'E'

acts like 'Cut', but the block is just deleted and not copied into any
clip.

4.4.8 Shift
-----------

Syntax: 'Shift [<|>][n][t|s]]'
Abbreviation: 'SH'

shifts the text on lines between the mark and the cursor either right
('>', the default) or left ('<') by adding or removing white space on
each line.  The adjustment size, specified as an unsigned integer 'n',
is in units of the current tab size ('t') or spaces ('s').  The default
is 1.  Adjustments start at the left edge of a vertical mark, or column
1 otherwise.  If the mark is not currently set, only the current line is
affected.

   'Shift' will insert tab characters only if the document's 'Tabs' flag
and the 'ShiftTabs' flag are both set--in which case an upper case 'T'
will appear in the status bar.  If either of the 'Tabs' or 'ShiftTabs'
flags is unset (i.e there is no upper case 'T' in the status bar)
'Shift' will only insert spaces.

   In the case of left shifts, if any indicated line has insufficient
leading white space for the requested adjustment to be made, then
'Shift' reports an error and makes no changes.

4.4.9 OpenClip
--------------

Syntax: 'OpenClip [FILENAME]'
Abbreviation: 'OC'

loads the given file name as the current clip, just as if you cut or
copied it from the current document; see *note Copy::.

   If the optional FILENAME argument is not specified, the file
requester will open and you will be prompted to select a file.  (You can
inhibit the file requester opening by using the 'NoFileReq' command; see
*note NoFileReq::.)

   If you escape from the file requester, you can enter the file name on
the input line.

4.4.10 SaveClip
---------------

Syntax: 'SaveClip [FILENAME]'
Abbreviation: 'SC'

saves the current clip to the given file name.

   If the optional FILENAME argument is not specified, the file
requester will open and you will be prompted to select a file.  (You can
inhibit the file requester opening by using the 'NoFileReq' command; see
*note NoFileReq::.)

   If you escape from the file requester, you can enter the file name on
the input line.

4.4.11 ClipNumber
-----------------

Syntax: 'ClipNumber [N]'
Abbreviation: 'CN'

sets the current clip number.  This number is used by 'OpenClip' and
'SaveClip', and by 'Copy', 'Cut' and 'Paste' if they are called without
any argument.  Its default value is zero.  N is limited only by the
integer size of the machine ne is running on.

   If the optional argument N is not specified, you can enter it on the
input line, the default being the current clip number.

4.4.12 Through
--------------

Syntax: 'Through [COMMAND]'
Abbreviation: 'T'

asks the shell to execute COMMAND, piping the current block in the
standard input, and replacing it with the output of the command.  This
command is most useful with filters, such as 'sort'.  Its practical
effect is to pass the block through the specified filter.

   Note that by selecting an empty block (or equivalently by having the
mark unset) you can use 'Through' to insert the output of any UN*X
command in your file.

   If the optional argument COMMAND is not specified, you can enter it
on the input line.

4.5 Search Commands
===================

These commands control the search system.  ne offers two complementary
searching techniques: a simple, fast exact matching search (optionally
ignoring case), and a very flexible and powerful, but slower, regular
expression search based on the GNU 'regex' library (again, optionally
case insensitive).

4.5.1 Find
----------

Syntax: 'Find [PATTERN]'
Abbreviation: 'F'

searches for the given pattern.  The cursor is positioned on the first
occurrence of the pattern, or an error message is given.  The direction
and the case sensitivity of the search are established by the value of
the back search and case sensitive search flags.  See *note
SearchBack::, and *note CaseSearch::.

   If the optional argument PATTERN is not specified, you can enter it
on the input line, the default being the last pattern used.

4.5.2 FindRegExp
----------------

Syntax: 'FindRegExp [PATTERN]'
Abbreviation: 'FX'

searches the current document for the given extended regular expression
(*note Regular Expressions::) .  The cursor is positioned on the first
string matching the expression.  The direction and the kind of search
are established by the value of the back search and case sensitive
search flags.  See *note SearchBack::, and *note CaseSearch::.

   If the optional argument PATTERN is not specified, you can enter it
on the input line, the default being the last pattern used.

4.5.3 Replace
-------------

Syntax: 'Replace [STRING]'
Abbreviation: 'R'

moves to the first match of the most recent find string or regular
expression and prompts you for which action to perform.  You can choose
among:

   * replacing the string found with the given string and moving to the
     next match ('Yes');

   * moving to the next match ('No');

   * replacing the string found with the given string, and stopping the
     search ('Last');

   * stopping the search immediately ('Quit');

   * replacing _all_ occurrences of the find string with the given
     string ('All');

   * reversing the search direction ('Backward' or 'Forward'); this
     choice will also modify the value of the back search flag.  See
     *note SearchBack::.

   'Replace' is mainly useful for interactive editing.  'ReplaceOnce',
'ReplaceAll' and 'RepeatLast' are more suited to macros.

   If no find string was ever specified, you can enter it on the input
line.  If the optional argument STRING is not specified, you can enter
it on the input line, the default being the last string used.  When the
last search was a regular expression search, there are some special
features you can use in the replace string (*note Regular Expressions::)
.  See *note FindRegExp::.

   Note that normally a search starts just one character after the
cursor.  However, when 'Replace' is invoked, the search starts at the
character just _under_ the cursor, so that you can safely 'Find' a
pattern and 'Replace' it without having to move back.

*Warning:* when recording a macro with *note Record::, there is no trace
in the macro of your interaction with ne during the replacement
process.  When the macro is played, you will again have to choose which
actions to perform.  If you want to apply automatic replacement of
strings for a certain number of times, you should look at *note
ReplaceOnce::, *note ReplaceAll::, and *note RepeatLast::.

4.5.4 ReplaceOnce
-----------------

Syntax: 'ReplaceOnce [STRING]'
Abbreviation: 'R1'

acts just like 'Replace', but without any interaction with you (unless
there is no find string).  The first string matched by the last search
pattern, if it exists, is replaced by the given replacement string.

   If the optional argument STRING is not specified, you can enter it on
the input line, the default being the last string used.

4.5.5 ReplaceAll
----------------

Syntax: 'ReplaceAll [STRING]'
Abbreviation: 'RA'

is similar to 'ReplaceOnce', but replaces _all_ occurrences of the last
search pattern between the cursor position and the end of the document
(in the direction indicated by the 'SearchBack' flag) with the given
replacement string.

   If the optional argument STRING is not specified, you can enter it on
the input line, the default being the last string used.

   Note that a slingle 'Undo' will restore _all_ the occurrences of the
search pattern replaced by 'ReplaceAll'.  See *note Undo::.

4.5.6 RepeatLast
----------------

Syntax: 'RepeatLast [TIMES] [F|Find|R|Replace]'
Abbreviation: 'RL'

repeats for the given number of times the last find or replace operation
(with replace we mean here a single replace, even if the last 'Replace'
operation ended with a global substitution).  If you don't specify
either FIND or REPLACE, it will repeat whichever one was last performed.

   If any find or replace operation runs into the end of the document
(in the direction indicated by the 'SearchBack' flag) and stops, then
and only then will a 'RepeatLast' command "wrap around" to the other end
of the document to continue the find or replace operation.

   'RepeatLast' is especially useful for researching a given number of
times, or replacing something a given number of times.  The standard
technique for accomplishing this is:

  1. 'Find' (or 'FindRegExp') the string you are interested in;

  2. if you want to repeat a replace operation, 'ReplaceOnce' with the
     replacement string you are interested in;

  3. now issue a 'RepeatLast N-1' command, where N is the number of
     occurrences you wanted to skip over, or replace.

   The important thing about this sequence of actions is that it will
work this way even in a macro.  The 'Replace' command cannot be used in
a macro unless you really want to interact with ne during the macro
execution.  Avoiding interaction during macros is the primary reason the
commands 'ReplaceAll' and 'ReplaceOnce' are provided.

4.5.7 MatchBracket
------------------

Syntax: 'MatchBracket'
Abbreviation: 'MB'

moves the cursor to the bracket associated with the bracket the cursor
is on.  If the cursor is not on a bracket, or there is no bracket
associated with the current one, an error message is issued.  Recognized
brackets are '{}', '()', '[]' '<>', and '`''.  See *note
AutoMatchBracket::.

4.5.8 AutoMatchBracket
----------------------

Syntax: 'AutoMatchBracket [0..15]'
Abbreviation: 'AMB'

sets the auto match bracket mode.  When the cursor is on a recognized
bracket ('{}', '()', '[]', '<>', or '`'') and the associated matching
bracket is on the screen, that matching bracket will be indicated
according to the mode.  The mode is either zero for no bracket matching,
or the sum of 1 (altered foreground and background brightness), 2
(inverse), 4 (bold), and 8 (underline).  If no mode is specified, ne
prompts you for one.  The default mode is 1.  See *note MatchBracket::.

4.5.9 SearchBack
----------------

Syntax: 'SearchBack [0|1]'
Abbreviation: 'SB'

sets the back search flag.  When this flag is true, every search or
replacement command is performed backwards.

   If you invoke 'SearchBack' with no arguments, it will toggle the
flag.  If you specify 0 or 1, the flag will be set to false or true,
respectively.  A lower case 'b' will appear on the status bar if the
flag is true.

   Note that this flag also can be set through interactions with the
'Replace' command.  See *note Replace::.

4.5.10 CaseSearch
-----------------

Syntax: 'CaseSearch [0|1]'
Abbreviation: 'CS'

sets the case sensitivity flag.  When this flag is true, the search
commands distinguish between the upper and lower case letters.  By
default the flag is false.

   If you invoke 'CaseSearch' with no arguments, it will toggle the
flag.  If you specify 0 or 1, the flag will be set to false or true,
respectively.  A lower case 'c' will appear on the status bar if the
flag is true.

4.5.11 AutoComplete
-------------------

Syntax: 'AutoComplete [PREFIX]'
Abbreviation: 'AC'

attempts to extend the PREFIX using matching words from your open
documents, and inserts the extended text into your document.  If the
PREFIX can be extended unambiguously, the matching text is immediately
inserted into your document.  Otherwise, ne displays a selection of
all words in open documents that match PREFIX, and inserts the word you
select into the current document.  Matching words from the current
document display normally; those which only exist in other open
documents are bold and with a trailing asterisk.  If no PREFIX is given
on the command line, or if 'AutoComplete' is selected from the 'Extras'
menu or using a keyboard shortcut, the word characters to the immediate
left of the cursor in the current document are used as the PREFIX.  Note
that if no word characters are to the left of the cursor, or the PREFIX
given on the command line is an empty string ('""'), then all words in
all your open documents are displayed.  Prefix matches may be case
sensitive or not depending on the current document's 'CaseSearch' flag
state.  See *note CaseSearch::.

4.6 Macros Commands
===================

Macros are lists of commands.  Any series of operations that has to be
performed frequently is a good candidate for being a macro.

   Macros can be written manually: they are just ASCII files, each
command occupying a line (lines starting with '#' are considered
comments; lines starting with other nonalphabetical characters are
presently ignored).  But the real power of macros is that they be
recorded during the normal usage of ne.  When the recording
terminates, the operations that have been recorded can be saved for
later use.  Note that each document has a current macro (the last macro
that has been opened or recorded).

4.6.1 Record
------------

Syntax: 'Record [0|1]'
Abbreviation: 'REC'

sets the recording state flag.  When this flag becomes true, ne starts
recording your actions in a new macro.  When it becomes false, the macro
recording is stopped, and the macro can be played or saved via *note
Play::, or *note SaveMacro::.

   If you invoke 'Record' with no arguments, it will toggle the flag.
If you specify 0 or 1, the flag will be set to false or true,
respectively.  An upper case 'R' will appear on the status bar if the
flag is true.

   The reason for providing a flag instead of an explicit start/stop
recording command pair is that this way it is possible to bind both
starting and stopping macro recording to a single key while still being
able to specify "absolute" menu items (by using 'Record 0' and 'Record
1').  For instance, the default key binding for '<Control>-T' is simply
'Record', which means that this shortcut can be used both for initiating
and for terminating a macro recording.

4.6.2 Play
----------

Syntax: 'Play [TIMES]'
Abbreviation: 'PL'

plays the current macro for the given number of times.  If the optional
argument TIMES is not specified, you can enter it on the input line.

   A (possibly iterated) macro execution terminates as soon as its
stream of instructions is exhausted, or one of its commands returns an
error.  This means that, for instance, you can perform some complex
operation on all the lines containing a certain pattern by recording a
macro that searches for the pattern and performs the operation, and then
playing it a preposterously huge number of times.

   Execution of a macro can be interrupted by '<Control>-\'.

4.6.3 Macro
-----------

Syntax: 'Macro [FILENAME]'
Abbreviation: 'MA'

executes the given file name as a macro.

   If the optional FILENAME argument is not specified, the file
requester is opened, and you are prompted to select a file.  (You can
inhibit the file requester opening by using the 'NoFileReq' command; see
*note NoFileReq::.)

   If you escape from the file requester, you can input the file name on
the command line.

   Note that macros whose names do not conflict with a command can be
called without using 'Macro'.  Whenever ne is required to perform a
command it cannot find in its internal tables, it will look for a macro
by that name in the current directory.  If this search also fails, ne
looks in '~/.ne' and finally in the 'macros' subdirectory of ne's
global directory (defined when ne was built, or in a place specified
by your 'NE_GLOBAL_DIR' environment variable) for a macro file by that
name.

*Warning:* the first time a macro is executed it is cached into a hash
table and is kept _forever_ in memory unless the 'UnloadMacros' command
is issued; see *note UnloadMacros::.  The next time a macro with the
same file name is invoked, the cached list is searched for it before
accessing the file using a case insensitive string comparison.  That is,
if you call '~/foobar/macro', a subsequent call for '/usr/MACRO' or even
just 'MaCrO' will use the cached version of '~/foobar/macro'.  Note that
the cache table is global to ne and not specific to any single
document.  This greatly improves efficiency when macros are used
repeatedly.

4.6.4 OpenMacro
---------------

Syntax: 'OpenMacro [FILENAME]'
Abbreviation: 'OM'

loads the given file name as the current macro just as if you 'Record'ed
it; see *note Record::.

   If the optional FILENAME argument is not specified, the file
requester is opened, and you are prompted to select a file.  (You can
inhibit the file requester opening by using the 'NoFileReq' command; see
*note NoFileReq::.)

   If you escape from the file requester, you can input the file name on
the command line.

4.6.5 SaveMacro
---------------

Syntax: 'SaveMacro [FILENAME]'
Abbreviation: 'SM'

saves the current macro in a file with the given name.

   If the optional FILENAME argument is not specified, the file
requester is opened, and you are prompted to select a file.  (You can
inhibit the file requester opening by using the 'NoFileReq' command; see
*note NoFileReq::.)

   If you escape from the file requester, you can input the file name on
the command line.

   'SaveMacro' is of course most useful for saving macros you just
recorded.  The macros can then be loaded as normal text files for
further editing, if necessary.  Note that 'SaveMacro' converts
'InsertChar' commands into a possibly smaller number of 'InsertString'
commands.  This makes macros easier to read and edit.  See *note
InsertChar::, and *note InsertString::.

4.6.6 UnloadMacros
------------------

Syntax: 'UnloadMacros'
Abbreviation: 'UM'

frees the macro cache list.  After this command, the 'Macro' command
will be forced to search for the file containing the macros it has to
play.

   'UnloadMacros' is especially useful if you are experimenting with a
macro bound to some keystroke, and you are interactively modifying it
and playing it.  'UnloadMacros' forces ne to look for the newer
version available.

4.7 Undo Commands
=================

The following commands control the undo system.

4.7.1 Undo
----------

Syntax: 'Undo [N]'
Abbreviation: 'U'

undoes the last N actions.  If N is not specified, it is assumed to be
one.  After you undo a number of actions, you can 'Redo' all or some of
them; see *note Redo::.  However, if you take any new actions after
having 'Undo'ne some, you can no longer 'Redo' those 'Undo'ne actions.
See *note Redo::.

4.7.2 Redo
----------

Syntax: 'Redo [N]'
Abbreviation: 'RE'

redoes the last N actions undone by 'Undo' (as long as you don't take
any actions that change the text between the 'Undo' and 'Redo'
commands).  If N is not specified, it is assumed to be one.  You can
only 'Redo' actions that have been 'Undo'ne.  See *note Undo::.

4.7.3 UndelLine
---------------

Syntax: 'UndelLine [N]'
Abbreviation: 'UL'

inserts at the cursor position for N times the last non-empty line that
was deleted with the 'DeleteLine' command.  If N is not specified, it is
assumed to be one.

   'UndelLine' is most useful in that it allows a very fast way of
moving one line around.  Just delete it, and undelete it somewhere else.
It is also an easy way to replicate a line without getting involved with
clips.

   Note that 'UndelLine' works independently of the status of the undo
flag.  See *note DoUndo::.

4.7.4 DoUndo
------------

Syntax: 'DoUndo [0|1]'
Abbreviation: 'DU'

sets the flag that enables or disables the undo system.  When you turn
the undo system off, all the recorded actions are discarded, and the
undo buffers are reset.

   If you invoke 'DoUndo' with no arguments, it will toggle the flag.
If you specify 0 or 1, the flag will be set to false or true,
respectively.  A lower case 'u' will appear on the status bar if the
flag is true.  (The 'U' will be upper case if the flag is true and the
'AtomicUndo' level is non-zero.)

   The usefulness of this option relies in the fact that the undo system
is a major memory eater.  If you plan to do massive editing (say,
cutting and pasting megabytes of text) it is a good idea to disable the
undo system, both for improving (doubling) performance and for using
less (half) memory.  Except for this, on a virtual memory system we see
no reason to not keep the undo flag always true, and this is indeed the
default.

4.7.5 AtomicUndo
----------------

Syntax: 'AtomicUndo [0|+|-]'
Abbreviation: 'AU'

increases, decreases, sets or clears the 'AtomicUndo' level.  The normal
level is zero.  All current document changes made while the 'AtomicUndo'
level is above zero are treated as a single change by the 'Undo' and
'Redo' commands.  If no parameter is given, a level of 0 is set to 1;
otherwise the current non-zero level is decremented.  If 0 is given, the
level is reset to zero.  Parameters of '+' and '-' respectively
increment and decrement the level, which in no case can be negative.  If
the level is above zero, the 'DoUndo' flag in the status bar, which is
normally a lower-case 'u', becomes upper case 'U'.

   Two other actions will reset the 'AtomicUndo' level to zero: invoking
the 'Undo' command, and disabling the undo system with the 'DoUndo'
command.  You cannot set a non-zero 'AtomicUndo' level unless the undo
system is enabled.

   Note: macros that you wish to undo and redo atomically--i.e., as if
they were single commands--should begin with 'AtomicUndo +' and end with
'AtomicUndo -' so that they can call and/or be called by other macros.

4.8 Formatting Commands
=======================

The following commands allow simple formatting operations on the text.
Note that for ne a paragraph is delimited by an empty line or a line
with leading white space incongruous with that of preceeding lines.

4.8.1 Center
------------

Syntax: 'Center [N]'
Abbreviation: 'CE'

centers N lines from the cursor position onwards.  If N is not
specified, it is assumed to be one.  The lines are centered with spaces,
relatively to the value of the right margin as set by the 'RightMargin'
command.  See *note RightMargin::.

4.8.2 Paragraph
---------------

Syntax: 'Paragraph [N]'
Abbreviation: 'PA'

reformats N paragraphs from the cursor position onwards.  If N is not
specified, it is assumed to be one.  The paragraphs are formatted
relatively to the value of the right margin as set by the 'RightMargin'
command.  See *note RightMargin::.

   ne's notion of a paragraph includes the current non-blank line
(regardless of its leading white space) and all subsequent non-blank
lines that have identical (to each other's--not to the first line's)
leading white space.  Therefore your paragraphs can have various first
line indentations and left margins.  'Paragraph' also takes into account
characters commonly used at the left edge of block comments ('/', '*',
'#', spaces, and tabs) or quoted email ('>'), and attempts to preserve
those on the left edge when possible.

   After the 'Paragraph' command completes, your cursor will be
positioned on the first non-blank character after the last reformatted
paragraph (or, if there is no such character, at the end of the
document).

   'Paragraph' does not insert "smart" spaces after full stops and
colons, nor does it do other "smart" things such as justification.  If
you need such facilities, you should consider using a text formatter.
TeX for example is usually an excellent choice.

4.8.3 ToUpper
-------------

Syntax: 'ToUpper [N]'
Abbreviation: 'TU'

shifts to upper case the letters from the cursor position up to the end
of a word, and moves to the first letter of next word for N times.

   The description of the command may seem a little bit cryptic.  What
is really happening is that there are situations where you only want to
upper case the last part of a word.  In this case, you just have to
position the cursor in the first character you want to upper case, and
use 'ToUpper' with no argument.

   If you apply 'ToUpper' on the first character of a word, it will just
upper case N words.

4.8.4 ToLower
-------------

Syntax: 'ToLower [N]'
Abbreviation: 'TL'

acts exactly like 'ToUpper', but lowers the case.  See *note ToUpper::.

4.8.5 Capitalize
----------------

Syntax: 'Capitalize [N]'
Abbreviation: 'CA'

acts exactly like 'ToUpper', but capitalizes, that is, makes the first
letter upper case and the other ones lower case.  See *note ToUpper::.

4.8.6 RightMargin
-----------------

Syntax: 'RightMargin [N]'
Abbreviation: 'RM'

sets the right margin for all formatting operations, and for 'WordWrap'.
See *note WordWrap::.

   If the optional argument N is not specified, you can enter it on the
input line, the default being the current value of the right margin.

   A value of zero for N will force ne to use (what it thinks it is)
the current screen width as right margin.

4.8.7 WordWrap
--------------

Syntax: 'WordWrap [0|1]'
Abbreviation: 'WW'

sets the word wrap flag.  When this flag is true, ne will
automatically break lines of text when you attempt to insert characters
beyond the right margin.  See *note RightMargin::.  ne will attempt to
preserve certain invariant characters at the left edge of paragraphs
typically used to indicate comments in source code or quoted passages in
email text.  See *note Paragraph::.

   If you invoke 'WordWrap' with no arguments, it will toggle the flag.
If you specify 0 or 1, the flag will be set to false or true,
respectively.  A lower case 'w' will appear on the status bar if the
flag is true.

4.8.8 AutoIndent
----------------

Syntax: 'AutoIndent [0|1]'
Abbreviation: 'AI'

sets the auto indent flag.  When this flag is true, ne will
automatically insert TABs and spaces on a new line (created by an
'InsertLine' command, or by automatic word wrapping) in such a way to
replicate the initial spaces of the previous line.  Most useful for
indenting programs.

   If you invoke 'AutoIndent' with no arguments, it will toggle the
flag.  If you specify 0 or 1, the flag will be set to false or true,
respectively.  A lower case 'a' will appear on the status bar if the
flag is true.

   'AutoIndent' features a nice interaction with 'Undo'.  Whenever a new
line is created, the insertion of spaces is recorded as a separate
action in the undo buffer (with respect to the line creation).  If you
are not satisfied with the indentation, just give the 'Undo' command and
the indentation will disappear (but the new line will remain in place,
since its creation has been recorded as a separate action).  See *note
Undo::.

4.9 Preferences Commands
========================

These commands allow you to set your preferences, that is, the value of
a series of flags that modify the behaviour of ne.  (Some of the flag
commands, like the command for the indent flag, appear in other
sections.)  The status of the flags can be saved and restored later
either by writing them out to a file (saved as a macro that suitably
sets the flags) or by pushing them onto a "preferences stack".  The back
search and the read only flags are not saved, because they do not
represent a preference, but rather a temporary state.  The escape time
and the turbo parameter are global to ne, and are not saved.  However,
you can add manually to a preferences file any preferences command (such
as 'EscapeTime' or 'Turbo'); usually, this will be done to the default
preferences file '~/.ne/.default#ap'.

   Note that there is an automatic preferences system, which
automagically loads a preferences file related to the extension of the
file name.  Automatic preferences files are kept in your '~/.ne'
directory.  They are named as an extension postfixed with '#ap'.  Each
time you open a file whose name has an extension for which there is an
automatic preferences file, the latter is executed.  Opening a file
which has no extension causes the prefs from '~/.ne/.default#ap' to be
loaded.  If you want to inhibit this process, you can clear the
automatic preferences flag.  See *note AutoPrefs::.

4.9.1 Flags
-----------

Syntax: 'Flags'
Abbreviation: 'FLAG'

displays a list of all the status flags for ne and their associated
commands.  It is not recorded when recording a macro.

     FLAG COMMAND      ABBR  DESCRIPTION
       i   Insert        I    inserts new characters (vs. replacing)
       a   AutoIndent    AI   aligns cursor under previous line after <Return>
       b   SearchBack    SB   searches search backward rather than forward
       c   CaseSearch    CS   searches are case sensitive
       w   WordWrap      WW   breaks long lines as you type
       f   FreeForm      FF   allows cursor to move beyond the end of lines
       p   AutoPrefs     AP   use automatic preferences based on file extension
       v   VerboseMacros VM   record macros using use long command names
       u   DoUndo        DU   record edits for later undoing
       r   ReadOnly      RO   changes are not allowed
       t/T Tabs          TAB  TAB key inserts TABs instead of spaces
       T   ShiftTabs     ST   Shift may insert TABs (only if 't' is also set)
       d   DelTabs       DT   BS and DEL may remove tabs worth of space
       B/! Binary        B    affects file loading/saving
       M   Mark          M    mark set for line-oriented block operations
       V   MarkVert      MV   like mark, but block is rectangle
       R   Record        REC  actions are being recorded in a macro
       P   PreserveCR    PCR  affects how <CR> chars are loaded from files
       C   CRLF          CRLF use CR/LF as line terminator
       *   Modified      MOD  document has been modified since last saved
       @   UTF8IO        U8IO I/O (keyboard and terminal) are UTF-8 encoded
     A/8/U UTF8          U8   the document encoding (ASCII, 8-bit or UTF-8)

   The 'RequestOrder' and 'AutoMatchBracket' flags' states are not
indicated on the status bar.  See *note RequestOrder:: and *note
AutoMatchBracket:: respectively.  A '!' indicates the last line is not
terminated.

4.9.2 AutoPrefs
---------------

Syntax: 'AutoPrefs [0|1]'
Abbreviation: 'AP'

sets the automatic preferences flag.  If this flag is true, each time an
'Open' command is executed and a file is loaded, ne will look for an
automatic preferences file in your '~/.ne' directory.  The preferences
file name is given by the extension of the file loaded, postfixed with
'#ap'.  Thus, for instance, C sources have an associated 'c#ap' file.
*Note Automatic Preferences::.

   If you invoke 'AutoPrefs' with no arguments, it will toggle the flag.
If you specify 0 or 1, the flag will be set to false or true,
respectively.  A lower case 'p' will appear on the status bar if the
flag is true.

4.9.3 Binary
------------

Syntax: 'Binary [0|1]'
Abbreviation: 'B'

sets the binary flag.  When this flag is true, loading and saving a
document is performed in a different way.  On loading, only nulls are
considered newlines; on saving, nulls are saved instead of newlines.
This allows you to edit a binary file, fix some text in it, and save it
without modifying anything else.  Normally, line feeds, carriage returns
and nulls are considered newlines, so that what you load will have all
nulls and carriage returns substituted by newlines when saved.

   Note that since usually binary files contain a great number of nulls,
and every null will be considered a line terminator, the memory
necessary for loading a binary file can be several times bigger than the
length of the file itself.  Thus, binary editing within ne should be
considered not a normal activity, but rather an exceptional one.

   If you invoke 'Binary' with no arguments, it will toggle the flag.
If you specify 0 or 1, the flag will be set to false or true,
respectively.  An upper case 'B' will appear on the status bar if the
flag is true.  If false, a '-' or '!' will indicate whether the last
line of the document is empty, which will determine whether the
resulting file will have a normal line termination when the document is
saved.

4.9.4 Insert
------------

Syntax: 'Insert [0|1]'
Abbreviation: 'I'

sets the insert flag.  If this flag is true, the text you type is
inserted, otherwise it overwrites the existing characters.  This also
governs the behaviour of the 'InsertChar' and 'InsertString' commands.

   If you invoke 'Insert' with no arguments, it will toggle the flag.
If you specify 0 or 1, the flag will be set to false or true,
respectively.  A lower case 'i' will appear on the status bar if the
flag is true.

4.9.5 FastGUI
-------------

Syntax: 'FastGUI [0|1]'
Abbreviation: 'FG'

sets the fast graphical user interface flag.  When this flag is true,
ne tries to print as little as possible while displaying menus and the
status bar.  In particular, menu items are highlighted by the cursor
only, the status bar is not highlighted (which allows printing it with
fewer characters) and the hexadecimal code is not displayed.  This
option is only (but very) useful if you are using ne through a slow
connection.

   If you invoke 'FastGUI' with no arguments, it will toggle the flag.
If you specify 0 or 1, the flag will be set to false or true,
respectively.

   The 'FastGUI' setting is saved in your '~/.ne/.default#ap' file when
you use the 'SaveDefPrefs' command or the 'Save Def Prefs' menu.  It is
not saved by the 'SaveAutoPrefs' command.

4.9.6 FreeForm
--------------

Syntax: 'FreeForm [0|1]'
Abbreviation: 'FF'

sets the free form flag.  When this flag is true, you can move with the
cursor anywhere on the screen, even where there is no text present
(however, you cannot move inside the space expansion of a TAB
character).

   If you invoke 'FreeForm' with no arguments, it will toggle the flag.
If you specify 0 or 1, the flag will be set to false or true,
respectively.  A lower case 'f' will appear on the status bar if the
flag is true.

   The issue free-form-versus-non-free-form is a major religious war
that has engaged users from day one.  The due of the implementor is to
allow both choices, and to set as default the correct one (in his humble
opinion).  In this case, non-free-form.

4.9.7 NoFileReq
---------------

Syntax: 'NoFileReq [0|1]'
Abbreviation: 'NFR'

sets the file requester flag.  When this flag is true, the file
requester is never opened, under any circumstances.

   If you invoke 'NoFileReq' with no arguments, it will toggle the flag.
If you specify 0 or 1, the flag will be set to false or true,
respectively.

4.9.8 RequestOrder
------------------

Syntax: 'RequestOrder [0|1]'
Abbreviation: 'RQO'

sets the request order flag.  When this flag is true, the requester
displays entries in column order.  Otherwise entries are displayed by
rows.

   If you invoke 'RequestOrder' with no arguments, it will toggle the
flag.  If you specify 0 or 1, the flag will be set to false or true,
respectively.

   The 'RequestOrder' setting is saved in your '~/.ne/.default#ap' file
when you use the 'SaveDefPrefs' command or the 'Save Def Prefs' menu.
It is not saved by the 'SaveAutoPrefs' command.

4.9.9 StatusBar
---------------

Syntax: 'StatusBar [0|1]'
Abbreviation: 'ST'

sets the status bar flag.  When this flag is true, the status bar is
displayed at the bottom of the screen.  There are only two reasons to
turn off the status bar we are aware of:

   * if you are using ne through a slow connection, updating the
     line/column indicator can really slow down editing;

   * scrolling caused by cursor movement on terminals that do not allow
     to set a scrolling region can produce annoying flashes at the
     bottom of the screen.

   If you invoke 'StatusBar' with no arguments, it will toggle the flag.
If you specify 0 or 1, the flag will be set to false or true,
respectively.

   The 'StatusBar' setting is saved in your '~/.ne/.default#ap' file
when you use the 'SaveDefPrefs' command or the 'Save Def Prefs' menu.
It is not saved by the 'SaveAutoPrefs' command.

4.9.10 HexCode
--------------

Syntax: 'HexCode [0|1]'
Abbreviation: 'HC'

sets the hex code flag.  When this flag is true, the hexadecimal code of
the character currently under the cursor is displayed on the status bar.

4.9.11 ReadOnly
---------------

Syntax: 'ReadOnly [0|1]'
Abbreviation: 'RO'

sets the read only flag.  When this flag is true, no editing can be
performed on the document (any such attempt produces an error message).
This flag is automatically set whenever you open a file that you cannot
write to.  See *note Open::.

   If you invoke 'ReadOnly' with no arguments, it will toggle the flag.
If you specify 0 or 1, the flag will be set to false or true,
respectively.  A lower case 'r' will appear on the status bar if the
flag is true.

4.9.12 EscapeTime
-----------------

Syntax: 'EscapeTime [N]'
Abbreviation: 'ET'

sets the escape time.  The <Escape> key is recognized as such after N
tenths of second.  (*note Motivations and Design::.)  Along slow
connections, it can happen that the default value of 10 is too low: in
this case, escape sequences (e.g., those of the arrow keys) could be
erroneously broken into an escape and some spurious characters.  Rising
the escape time usually solves this problem.  Allowed values range from
0 to 255.  Note that you can accelerate the recognition of the <Escape>
key by hitting it twice in a row.

   Note that the escape time is global to ne, and it is not saved.
However, you can add an 'EscapeTime' command manually to a preferences
file.

4.9.13 TabSize
--------------

Syntax: 'TabSize [SIZE]'
Abbreviation: 'TS'

sets the number of spaces ne will use when expanding a TAB character.

   If the optional argument SIZE is not specified, you can enter it on
the input line, the default being the current TAB size.  Allowed values
are strictly between 0 and half the width of the screen.

4.9.14 Tabs
-----------

Syntax: 'Tabs [0|1]'
Abbreviation: 'TAB'

sets the 'Tabs' flag.  When this flag is set, <Tab> key and the
'InsertTab' command will insert literal TAB characters.  Otherwise it
will insert enough spaces to have the same visual effect.

   In normal editing, the <Tab> key invokes the command "'InsertTab' 1".
Unlike most others, the <Tab> key cannot be mapped to other commands.
Thus the 'Tabs' flag provides the only customization ne offers for the
<Tab> key.

   If set, either a lower case 't' or upper case 'T' will appear in the
status bar depending on the state of the 'ShiftTabs' flag.  (The
'ShiftTabs' flag is irrelevant if the 'Tabs' flag is off.)  See *note
ShiftTabs::.

4.9.15 DelTabs
--------------

Syntax: 'DelTabs [0|1]'
Abbreviation: 'DT'

sets the 'DelTabs' flag.  When this flag is set, a 'd' will appear on
the status bar, and the <BackSpace> and <Del> keys will remove a tab's
worth of SPACE characters if a TAB character could have occupied the
same whitespace in the current line as the removed spaces.  This is the
deletion counterpart to the 'Tabs' flag.  See *note Tabs::.

4.9.16 ShiftTabs
----------------

Syntax: 'ShiftTabs [0|1]'
Abbreviation: 'SHT'

sets the 'ShiftTabs' flag.  'ShiftTabs' has an effect only when the
'Tabs' flag is set, in which case an upper case 'T' appears in the
status bar.  When this flag and the 'Tabs' flag are both set, left and
right 'Shift' commands may use tab characters to adjust leading white
space.  Otherwise only spaces are used.  See *note Shift::.

4.9.17 Turbo
------------

Syntax: 'Turbo [STEPS]'
Abbreviation: 'TUR'

sets the turbo parameter.  Iterated actions and global replaces will
update at most STEPS lines of the screen (or at most twice the number of
visible rows if STEPS is zero); then, update will be delayed to the end
of the action.

   This feature is most useful when massive operations (such as
replacing thousands of occurrences of a pattern) have to be performed.
After having updated STEPS lines, ne can proceed at maximum speed,
because no visual update has to be performed.

   The value of the turbo parameter has to be adapted to the kind of
terminal you are using.  Very high values can be good on high-speed
terminals, since the time required for the visual updates is very small,
and it is always safer to look at what the editor is really doing.  On
slow terminals, however, small values ensure that operations such as
paragraph formatting will not take too long.

   You have to be careful about setting the turbo parameter too low.
ne keeps track internally of the part of the screen that needs refresh
in a very rough way.  This means that a value of less than, say, 8 will
force it to do a lot of unnecessary refresh.

   The default value of this parameter is zero, which means twice the
number of lines of the screen; for several reasons this does seem to be
a good value.

4.9.18 VerboseMacros
--------------------

Syntax: 'VerboseMacros [0|1]'
Abbreviation: 'VM'

sets the verbose macros flag.  When this flag is true, all macros
generated by recording or by automatic preferences saving will contain
full names, instead of short names.  This is highly desirable if you are
going to edit the macro manually, but it can slow down command parsing.

   If you invoke 'VerboseMacros' with no arguments, it will toggle the
flag.  If you specify 0 or 1, the flag will be set to false or true,
respectively.  A lower case 'v' will appear on the status bar if the
flag is true.

   The only reason to use this flag is when recording a macro that will
be played a great number of times.  Automatic preferences files are too
short to be an issue with respect to execution timing.

   The 'VerboseMacros' setting is saved in your '~/.ne/.default#ap' file
when you use the 'SaveDefPrefs' command or the 'Save Def Prefs' menu.
It is not saved by the 'SaveAutoPrefs' command.

4.9.19 PreserveCR
-----------------

Syntax: 'PreserveCR [0|1]'
Abbreviation: 'PCR'

sets the preserve carriage returns flag.  When a file is loaded into a
document for which this flag is false, both CR (carriage return) and NL
(new line) characters are treated as line terminators.  If the flag is
true, CR characters do not act as line terminators but are instead
preserved in the document.  This flag has no effect except when loading
a file into a document.

   If you invoke 'PreserveCR' with no arguments, it will toggle the
flag.  If you specify 0 or 1, the flag will be set to false or true,
respectively.  An upper case 'P' will appear on the status bar if the
flag is true.

4.9.20 CRLF
-----------

Syntax: 'CRLF [0|1]'
Abbreviation: 'CRLF'

sets the CR/LF flag.  When a file is saved from a document for which
this flag is true, both a CR (carriage return) and a NL (new line)
character are output as line terminators.  This flag has no effect
except when saving a file.

   This flag is automatically set if you load a file that has at least
one CR/LF sequence in it.

   If you invoke 'CRLF' with no arguments, it will toggle the flag.  If
you specify 0 or 1, the flag will be set to false or true, respectively.
An upper case 'C' will appear on the status bar if the flag is true.

4.9.21 VisualBell
-----------------

Syntax: 'VisualBell [0|1]'
Abbreviation: 'VB'

sets the visual bell flag.  When this flag is true, the terminal will
flash (if possible) instead of beeping.

   If you invoke 'VisualBell' with no arguments, it will toggle the
flag.  If you specify 0 or 1, the flag will be set to false or true,
respectively.

4.9.22 PushPrefs
----------------

Syntax: 'PushPrefs [N]'
Abbreviation: 'PUSHP'

pushes N copies of the user preferences onto a stack.  If not specified,
N defaults to one.  Use the 'PopPrefs' command to pop preferences off
the stack and restore the values.  See *note PopPrefs::.  Note that the
preferences stack is global, not document-specific, so you could
'PushPrefs' one document's preferences, switch documents, then
'PopPrefs' those preferences, thereby altering the preferences for the
second document.  The maximum preferences stack depth is 32.

   'PushPrefs' and 'PopPrefs' are useful in macros that require certain
preferences to work properly.  A macro can 'PushPrefs', change any
preferences necessary, do its work, then 'PopPrefs' to restore the users
previous preferences settings.

'PushPrefs' saves the following values on the preferences stack:

       AutoIndent  DelTabs   NoFileReq    StatusBar  VisualBell
       AutoPrefs   DoUndo    PreserveCR   ShiftTabs  WordWrap
       Binary      FreeForm  ReadOnly     Tabs
       CaseSearch  HexCode   RightMargin  TabSize
       ClipNumber  Insert    SearchBack   UTF8Auto

4.9.23 PopPrefs
---------------

Syntax: 'PopPrefs [N]'
Abbreviation: 'POPP'

pops N sets of preferences from the preferences stack (where they were
placed previously by 'PushPrefs') and applies those preferences to the
current document.  See *note PushPrefs::.  If not specified, N defaults
to one.  Note that the preferences stack is global, not document
specific.  Therefore you could 'PushPrefs' one document's preferences,
switch documents, then 'PopPrefs' those settings altering the
preferences for the second document.  The maximum preferences stack
depth is 32.

   'PushPrefs' and 'PopPrefs' are useful in macros that require certain
preferences to work properly.  A macro can 'PushPrefs', change any
preferences necessary, do its work, then 'PopPrefs' to restore the users
previous preferences settings.

PopPrefs restores the following values from the preferences stack:

       AutoIndent  DelTabs   NoFileReq    StatusBar  VisualBell
       AutoPrefs   DoUndo    PreserveCR   ShiftTabs  WordWrap
       Binary      FreeForm  ReadOnly     Tabs
       CaseSearch  HexCode   RightMargin  TabSize
       ClipNumber  Insert    SearchBack   UTF8Auto

4.9.24 LoadPrefs
----------------

Syntax: 'LoadPrefs [FILENAME]'
Abbreviation: 'LP'

loads the given preference file, and sets the current preferences
accordingly.

   If the optional FILENAME argument is not specified, the file
requester is opened, and you are prompted to select a file.  (You can
inhibit the file requester opening by using the 'NoFileReq' command; see
*note NoFileReq::.)  If you escape from the file requester, you can
input the file name on the command line.

   Note that a preferences file is just a macro containing only option
modifiers.  You can manually edit a preferences file for special
purposes, such as filtering out specific settings.  *Note Hints and
Tricks::.

4.9.25 SavePrefs
----------------

Syntax: 'SavePrefs [FILENAME]'
Abbreviation: 'SP'

saves the current preferences to the given file.

   If the optional FILENAME argument is not specified, the file
requester is opened, and you are prompted to select a file.  (You can
inhibit the file requester opening by using the 'NoFileReq' command; see
*note NoFileReq::.)  If you escape from the file requester, you can
input the file name on the command line.

4.9.26 LoadAutoPrefs
--------------------

Syntax: 'LoadAutoPrefs'
Abbreviation: 'LAP'

loads the preferences file in '~/.ne' associated with the current
document's file name extension.  If the current file name has no
extension, the default preferences are loaded.  See *note AutoPrefs::.

4.9.27 SaveAutoPrefs
--------------------

Syntax: 'SaveAutoPrefs'
Abbreviation: 'SAP'

saves the current preferences to the file in '~/.ne' associated with the
current document's file name extension.  If the current file name has no
extension, an error message is issued.  See *note AutoPrefs::.

4.9.28 SaveDefPrefs
-------------------

Syntax: 'SaveDefPrefs'
Abbreviation: 'SDP'

saves the current preferences to the '~/.ne/.default#ap' file.  This
file is always loaded by ne at startup.

4.9.29 Modified
---------------

Syntax: 'Modified [0|1]'
Abbreviation: 'MOD'

sets the modified flag.  This flag is set automatically whenever a
document is modified, and is used to determine which documents need to
be saved when ne exits.  Normally you would not alter this flag, but
when a document is inadvertently modified and you don't want the changes
saved, 'Modified' provides a way to make ne consider the document
unchanged.

   If you invoke 'Modified' with no arguments, it will toggle the flag.
If you specify 0 or 1, the flag will be set to false or true,
respectively.  An asterisk ('*') will appear on the status bar if the
flag is true.

4.9.30 Syntax
-------------

Syntax: 'Syntax [NAME|*]'
Abbreviation: 'SY'

loads the syntax with the given name, and colors the current document
accordingly.

   If the optional NAME argument is not specified, you are prompted for
one.  The current one, if set, is suggested as the default.  Use the
<Tab> key for a requester of the extant syntax recognizers.  The special
NAME * turns off syntax highlighting for the current document.
Otherwise, NAME must match a syntax definition either in your
'~/.ne/syntax' directory or in a directory named 'syntax' inside ne's
global directory.  Additionally, ne has a table mapping common
suffixes to syntax names.  If there is no syntax with a given name, ne
will try to remap the name using the following table (the string before
the colon is the name of the syntax file):

        ada: adb, ads
        asm: s
        c: c++, cc, cpp, cxx, h, h++, hpp, l, lex, y, yacc
        cobol: cbl, cob
        csh: tcsh
        diff: patch
        fortran: f, F, for, f90, F90
        html: htm
        java: js
        lisp: el, lsp
        mason: mas
        ocaml: ml, mli
        pascal: p, pas
        perl: pl, pm
        ps: eps
        puppet: pp
        python: py, sage
        rexx: rex
        ruby: rb
        sh: bash, bash_login, bash_logout, bash_profile, bashrc, ksh,
            profile, rc
        skill: il
        tex: latex, dtx, sty
        texinfo: texi, txi
        troff: 1
        verilog: v, vh, vhd
        xml: xsd
        yaml: yml

4.9.31 UTF8
-----------

Syntax: 'UTF8 [0|1]'
Abbreviation: 'U8'

sets the UTF-8 flag.  When this flag is true, ne considers the current
document as UTF-8 coded.  Note that this flag is set automatically upon
file loading (if possible) if you required automatic detection.  See
*note UTF8Auto::.

   If you invoke 'UTF8' with no arguments, it will toggle the flag.  If
you specify 0 or 1, the flag will be set to false or true, respectively.
When you try to set this flag, the document will be checked for UTF-8
compliance, and you will get an error message in case of failure.  When
you try to reset it, the document is set to ASCII or 8-bit, depending on
its content.  A 'U' will appear on the status bar if the flag is true.
Alternatively, an 'A' or an '8' will be displayed to denote whether the
document is composed exclusively by US-ASCII characters, or also by
other 8-bit characters (whose encoding is likely to be part of the
ISO-8859 family).  Note that each time this command modifies the
document encoding, it also resets the undo buffer.

4.9.32 UTF8Auto
---------------

Syntax: 'UTF8Auto [0|1]'
Abbreviation: 'U8A'

sets the UTF-8 automatic-detection flag.  When this flag is true, ne
will try to guess whether a file just loaded is UTF-8 encoded.
Moreover, when a non US-ASCII character is inserted in a pure US-ASCII
document, ne will automatically switch to UTF-8.  See *note UTF8::.  The
flag is true by default if ne detects UTF-8 I/O at startup.  See *note
UTF8IO::.

   If you invoke 'UTF8Auto' with no arguments, it will toggle the flag.
If you specify 0 or 1, the flag will be set to false or true,
respectively.

4.9.33 UTF8IO
-------------

Syntax: 'UTF8IO [0|1]'
Abbreviation: 'U8IO'

sets the UTF-8 input/output flag.  This flag is set automatically
depending on your locale setting, and is used to determine whether
communication with the user (keyboard and terminal) should be UTF-8
encoded.  Normally you would not alter this flag, but sometimes ne may
make the wrong guess (e.g., when you are remotely connected).

   If you invoke 'UTF8IO' with no arguments, it will toggle the flag.
If you specify 0 or 1, the flag will be set to false or true,
respectively.  An '@' will appear on the status bar if the flag is true.

4.10 Navigation Commands
========================

These commands allow you to move through a document.  Besides the
standard commands that allow you to move by lines, pages, et cetera,
ne has bookmarks that let you mark a position in a file so to move to
the same position later.

4.10.1 MoveLeft
---------------

Syntax: 'MoveLeft [N]'
Abbreviation: 'ML'

moves the cursor to the left by one character N times.  If the optional
N argument is not specified, it is assumed to be one.

4.10.2 MoveRight
----------------

Syntax: 'MoveRight [N]'
Abbreviation: 'MR'

moves the cursor to the right by one character N times.  If the optional
N argument is not specified, it is assumed to be one.

4.10.3 LineUp
-------------

Syntax: 'LineUp [N]'
Abbreviation: 'LU'

moves the cursor up by one line N times.  If the optional N argument is
not specified, it is assumed to be one.

4.10.4 LineDown
---------------

Syntax: 'LineDown [N]'
Abbreviation: 'LD'

moves the cursor down by one line N times.  If the optional N argument
is not specified, it is assumed to be one.

4.10.5 GotoLine
---------------

Syntax: 'GotoLine [LINE]'
Abbreviation: 'GL'

moves the cursor to the LINEth line of the file.  If LINE is zero or
greater than the number of lines in the file, the cursor is moved to the
last line.

   If the optional argument LINE is not specified, you can enter it on
the input line; the default input response is the current line number.

4.10.6 GotoColumn
-----------------

Syntax: 'GotoColumn [COLUMN]'
Abbreviation: 'GC'

moves the cursor to the COLUMNth column of the file.

   If the optional argument LINE is not specified, you can enter it on
the input line; the default input response is the current column number.

4.10.7 GotoMark
---------------

Syntax: 'GotoMark'
Abbreviation: 'GM'

moves the cursor to the current mark, if it exists.  See *note Mark::.

   'GotoMark' is mainly useful if you forgot where you started marking.
If you want to record positions in a file and jump to them later, you
may want to use a bookmarks.  See *note SetBookmark::.

4.10.8 PrevPage
---------------

Syntax: 'PrevPage [N]'
Abbreviation: 'PP'

moves the cursor N pages backward, if the cursor is on the first line of
the screen; otherwise moves the cursor to the first line of the screen,
and moves by N-1 pages.  If the optional N argument is not specified, it
is assumed to be one.

4.10.9 NextPage
---------------

Syntax: 'NextPage [N]'
Abbreviation: 'NP'

moves the cursor N pages forward, if the cursor is on the last line of
the screen; otherwise moves the cursor to the last line of the screen,
and moves by N-1 pages.  If the optional N argument is not specified, it
is assumed to be one.

4.10.10 PageUp
--------------

Syntax: 'PageUp [N]'
Abbreviation: 'PUP'

pages the screen backward by N screens.  If N is not specified, it is
assumed to be one.

4.10.11 PageDown
----------------

Syntax: 'PageDown [N]'
Abbreviation: 'PDN'

pages the screen forward by N screens.  If N is not specified, it is
assumed to be one.

4.10.12 PrevWord
----------------

Syntax: 'PrevWord [N]'
Abbreviation: 'PW'

moves the cursor to the first character of the previous word N times.
If the optional N argument is not specified, it is assumed to be one (in
which case, if the cursor is in the middle of a word the effect is just
to move it to the start of that word).

4.10.13 NextWord
----------------

Syntax: 'NextWord [N]'
Abbreviation: 'NW'

moves the cursor to the next word N times.  If the optional N argument
is not specified, it is assumed to be one.

4.10.14 MoveEOL
---------------

Syntax: 'MoveEOL'
Abbreviation: 'EOL'

moves the cursor to the end of the current line ('EOL' = end of line).

4.10.15 MoveSOL
---------------

Syntax: 'MoveSOL'
Abbreviation: 'SOL'

moves the cursor to the start of the current line ('SOL' = start of
line).

4.10.16 MoveTOS
---------------

Syntax: 'MoveTOS'
Abbreviation: 'TOS'

moves the cursor to the top line of the screen ('TOS' = top of screen).

4.10.17 MoveBOS
---------------

Syntax: 'MoveBOS'
Abbreviation: 'BOS'

moves the cursor to the lowest line currently visible ('BOS' = bottom of
screen).

4.10.18 MoveEOF
---------------

Syntax: 'MoveEOF'
Abbreviation: 'EOF'

moves the cursor to the end of the document ('EOF' = end of file).

4.10.19 MoveSOF
---------------

Syntax: 'MoveSOF'
Abbreviation: 'SOF'

moves the cursor to the start of the document ('SOF' = start of file).

4.10.20 MoveEOW
---------------

Syntax: 'MoveEOW'
Abbreviation: 'EOW'

moves the cursor one character past the end of the current word.

   'MoveEOW' is extremely useful in macros, because it allows you to
copy precisely the word the cursor is on.  *Note Hints and Tricks::.

4.10.21 MoveIncUp
-----------------

Syntax: 'MoveIncUp'
Abbreviation: 'MIU'

moves the cursor incrementally towards the beginning of the document.
More precisely, if the cursor is not on the start of the line it lies
on, then it is moved to the start of that line.  Otherwise, if it is on
the first line of the screen, then it is moved to the start of the
document; otherwise, it is moved to the first line of the screen.

4.10.22 MoveIncDown
-------------------

Syntax: 'MoveIncDown'
Abbreviation: 'MID'

moves the cursor incrementally towards the end of the document.  More
precisely, if the cursor is not on the end of the line it lies on, then
it is moved to the end of that line.  Otherwise, if it is on the last
line of the screen, then it is moved to the end of the document;
otherwise, it is moved to the last line of the screen.

4.10.23 AdjustView
------------------

Syntax: 'AdjustView [T|M|B|L|C|R] [N]'
Abbreviation: 'AV'

shifts the view (text visible in the terminal window) horizontally or
vertically without changing the cursor's position in the document.  View
adjustments are constrained by the current TAB size and the length and
width of the current document.  If called with no arguments 'T' is
assumed.

   'T', 'M', and 'B' cause vertical shifts so that the current line
becomes the top, middle, or bottom-most visible line respectively.

   'L', 'C', and 'R' cause horizontal shifts, making the current column
the left-most, center, or right-most visible positions.

   A optional number N immediately after 'T', 'B', 'L', or 'R' indicate
the number or rows or columns to shift the view toward the top, bottom,
left, or right of the window.

   Horizontal and vertical adjustment specifications may be combined, so
that for example 'AdjustView TL' shifts the view so that the current
position becomes the top left-most character on screen (within the
limits of the current TAB size).  Likewise, 'AdjustView B3R5' shifts the
view three lines toward the bottom and five columns (excepting TAB size)
toward the right.

4.10.24 ToggleSEOF
------------------

Syntax: 'ToggleSEOF'
Abbreviation: 'TSEOF'

moves the cursor to the start of document, if it is not already there;
otherwise, moves it to the end of the document.

   This kind of toggling command is very useful in order to gain some
keystrokes on systems with very few keys.  See also *note ToggleSEOL::,
*note MoveSOF::, and *note MoveEOF::.

4.10.25 ToggleSEOL
------------------

Syntax: 'ToggleSEOL'
Abbreviation: 'TSEOL'

moves the cursor to the start of the current line, if it is not already
there; otherwise, moves it to the end of the current line.

   This kind of toggling command is very useful in order to gain some
keystrokes on systems with very few keys.  See also *note ToggleSEOF::,
*note MoveSOL::, and *note MoveEOL::.

4.10.26 SetBookmark
-------------------

Syntax: 'SetBookmark [N|+1|-1|-|?]'
Abbreviation: 'SBM'

sets a document bookmark to the current cursor position.  Each document
has 10 available bookmarks designated '0' to '9', plus the automatic
bookmark designated by '-'.  If no option is given, '0' is assumed.
Values of N from '0' to '9' set the Nth bookmark, while '+1' and '-1'
indicate respectively the next and previous available unset bookmarks.
You can also set the '-' automatic bookmark, but it will be reset
automatically to the current position whenever a 'GotoBookmark' command
is issued.

   The '?' option will cause 'SetBookmark' to prompt you for a bookmark
designation.  The promp will include an indication of which bookmarks
are currently set.  You may find this useful in macros, or to bind a key
to 'SetBookmark ?'.

4.10.27 GotoBookmark
--------------------

Syntax: 'GotoBookmark [N|+1|-1|-]'
Abbreviation: 'GBM'

moves the cursor to the designated bookmark if that bookmark is set; see
*note SetBookmark::.  Each document has 10 available bookmarks
designated '0' to '9', plus the automatic bookmark designated by '-'.
If no option is given, '0' is assumed.  The optons '+1' and '-1'
indicate respectively the next and previous set bookmarks, so that
repeated 'GotoBookmark +1' commands will cycle through all currently set
bookmarks.  When successful, the '-' automatic bookmark is set to the
position in the document from which the command was issued, so that
'GotoBookmark -' returns you to the location from which you last issued
a successful 'GotoBookmark' command.  Subsequent repeated 'GotoBookmark
-' commands will toggle you between the two locations.

   The '?' option will cause 'GotoBookmark' to prompt you for a bookmark
designation.  The promp will include an indication of which bookmarks
are currently set.  You may find this useful in macros, or to bind a key
to 'GotoBookmark ?'.

4.10.28 UnsetBookmark
---------------------

Syntax: 'UnsetBookmark [N|+1|-1|-|*]'
Abbreviation: 'UBM'

unsets either the Nth bookmark, the next (+1) or previous (-1) set
bookmarks, the automatic (-) bookmark, or all (*) bookmarks, making it
as if they had never been set; see *note SetBookmark::.  If no option is
specified, N is assumed to be zero.  While you can unset the automatic
bookmark '-', it will be reset automatically to the current position
whenever a 'GotoBookmark' command is issued.  Each document's valid
bookmark designations are 0 to 9, and the '-' automatic bookmark.

4.11 Editing Commands
=====================

These commands allow modifying a document directly.

4.11.1 InsertChar
-----------------

Syntax: 'InsertChar [CODE]'
Abbreviation: 'IC'

inserts a character whose ASCII code is CODE at the current cursor
position.  CODE can be either decimal, hexadecimal if preceded by '0x',
or octal if preceded by '0'.  In any case, CODE must be different from
0.  All the currently active preferences options (insert, word wrapping,
auto indent, et cetera) are applied.

   If the optional argument CODE is not specified, you can enter it on
the input line, the default being the last inserted character.

   Note that inserting a line feed (10) is completely different from
inserting a line with 'InsertLine'.  'InsertChar 10' puts the control
char '<Control>-J' in the text at the current cursor position.  See
*note InsertLine::.

   Note also that 'SaveMacro' converts 'InsertChar' commands into a
possibly smaller number of 'InsertString' commands.  This makes macros
easier to read and edit.  See *note SaveMacro::.

4.11.2 InsertString
-------------------

Syntax: 'InsertString [TEXT]'
Abbreviation: 'IS'

inserts TEXT at the current cursor position.  If the optional argument
TEXT is omitted, you will be prompted for it on the command line.  All
the currently active preferences options (insert, word wrapping, auto
indent, et cetera) are applied.

   Note that 'SaveMacro' converts 'InsertChar' commands into a possibly
smaller number of 'InsertString' commands.  This makes macros easier to
read and edit.  See *note SaveMacro::.

4.11.3 InsertTab
----------------

Syntax: 'InsertTab [N]'
Abbreviation: 'IT'

inserts either N literal TAB characters or one or more spaces sufficient
to advance the current cursor position N tab stops depending on the
'Tabs' flag.  See *note Tabs::, *note TabSize::.

4.11.4 DeleteChar
-----------------

Syntax: 'DeleteChar [N]'
Abbreviation: 'DC'

deletes N characters from the text.  If the optional N argument is not
specified, it is assumed to be one.  Deleting a character when the
cursor is just after the last char on a line will join a line with the
following one; in other words, the carriage return between the two lines
will be deleted.  Note that if the cursor is past the end of the current
line, no action will be performed.

4.11.5 DeletePrevWord
---------------------

Syntax: 'DeletePrevWord [N]'
Abbreviation: 'DPW'

deletes text from the current position through the first character of
the N'th previous start-of-word.  If the optional N argument is not
specified, it is assumed to be one (in which case, if the cursor is in
the middle of a word the effect is just to delete to the start of that
word).

4.11.6 DeleteNextWord
---------------------

Syntax: 'DeleteNextWord [N]'
Abbreviation: 'DNW'

deletes text from the current position to the N'th next end-of-word If
the optional N argument is not specified, it is assumed to be one (in
which case, if the cursor is in the middle of a word the effect is just
to delete to the end of that word).

4.11.7 Backspace
----------------

Syntax: 'Backspace [N]'
Abbreviation: 'BS'

acts like 'DeleteChar', but moves the cursor to the left before deleting
each character.

4.11.8 InsertLine
-----------------

Syntax: 'InsertLine [N]'
Abbreviation: 'IL'

inserts N lines at the current cursor position, breaking the current
line.  If the optional N argument is not specified, it is assumed to be
one.

4.11.9 DeleteLine
-----------------

Syntax: 'DeleteLine [N]'
Abbreviation: 'DL'

deletes N lines starting from the current cursor position, putting the
last one in the temporary buffer, from which it can be undeleted.  See
*note UndelLine::.  If the optional N argument is not specified, it is
assumed to be one.  Note that this action is in no way inverse with
respect to 'InsertLine'.

4.11.10 DeleteEOL
-----------------

Syntax: 'DeleteEOL'
Abbreviation: 'DE'

deletes all characters from the current cursor position to the end of
the line.

   'DeleteEOL' could be easily implemented with a macro, but it is such
a common, basic editing feature that it seemed worth a separate
implementation.

4.12 Support Commands
=====================

These commands perform miscellaneous useful actions.  In particular,
they provide access to the shell and a way to assign the functionality
of <Escape> to another key.

4.12.1 About
------------

Syntax: 'About'
Abbreviation: 'About'

displays the copyright splash screen and places a simple information
line containing the version and build date of ne on the status bar.
Press any key to dismiss this screen.

4.12.2 Alert
------------

Syntax: 'Alert'
Abbreviation: 'AL'

beeps or flashes, depending on the value of the visual bell flag.

4.12.3 Beep
-----------

Syntax: 'Beep'
Abbreviation: 'BE'

beeps.  If your terminal cannot beep, it flashes.  If it cannot flash,
nothing happens (but you have a very bad terminal).

4.12.4 Exec
-----------

Syntax: 'Exec'
Abbreviation: 'EX'

prompts the user on the input line, asking for a command, and executes
it.  It is never registered while recording a macro (though the command
you type is).

   'Exec' is mainly useful for key bindings, menu configurations, and in
manually programmed macros.

   Note that if the command you specify does not appear in ne's
internal tables, it is considered to be a macro name.  See *note
Macro::.

4.12.5 Flash
------------

Syntax: 'Flash'
Abbreviation: 'FL'

acts as 'Beep', but interchanging the words "beep" and "flash".  Same
comments apply.  See *note Beep::.

4.12.6 Help
-----------

Syntax: 'Help [NAME]'
Abbreviation: 'H'

displays some help about the command NAME (both the short and the long
versions of the command names are accepted).  If no argument is given, a
list of all existing commands in long form is displayed, allowing you to
choose one.  You can browse the help text with the standard navigation
keys.  If you press <Return>, the command list will be displayed again.
If you press <f1> or <Escape>, you will return to normal editing.

   Invocations of the 'Help' command are never registered while
recording macros so that you can safely access the help system while
recording.  See *note Record::.

4.12.7 NOP
----------

Syntax: 'NOP'
Abbreviation: 'NOP'

does nothing.  Mainly useful for inhibiting standard key bindings.

4.12.8 Refresh
--------------

Syntax: 'Refresh'
Abbreviation: 'REF'

refreshes the display.  'Refresh' is very important, and should
preferably be bound to the '<Control>-L' sequence, for historical
reasons.  It can always happen that a noisy phone line or a quirk in the
terminal corrupts the display.  This command restores it from scratch.

   'Refresh' has the side effect of checking to see if your window size
has changed, and will modify the display to take that into account.

4.12.9 Suspend
--------------

Syntax: 'Suspend'
Abbreviation: 'SU'

suspends ne and returns you to a shell prompt; usually, the shell
command 'fg' is used to resume ne.

4.12.10 System
--------------

Syntax: 'System [COMMAND]'
Abbreviation: 'SYS'

asks the shell to execute COMMAND.  The terminal is temporarily reset to
the state it was in before ne's activation, and COMMAND is started.
When the execution is finished, control returns to ne.

   If the optional argument COMMAND is not specified, you can enter it
on the input line.

4.12.11 Escape
--------------

Syntax: 'Escape'
Abbreviation: 'ESC'

toggles the menus on and off, or escapes from the input line.  This
command is mainly useful for reprogramming the menu activator, and it is
never registered while recording a macro.  See *note Record::.

4.12.12 KeyCode
---------------

Syntax: 'KeyCode [K]'
Abbreviation: 'KC'

prompts you to press a key, and reports on the status bar the key code
ne associates with that key, the command currently associated with
that key code, as well as the input class for that key code.  Input
class codes are: ALPHA, COMMAND, RETURN, TAB, IGNORE, and INVALID. This
can be useful while configuring your '~/.ne/.keys' file.

   If the optional integer K (between 0 and 511) is given, 'KeyCode'
uses K as the key code and displays the information described above.

4.12.13 NameConvert
-------------------

Syntax: 'NameConvert [0|1]'
Abbreviation: 'NC'

converts the current document's name between relative and absolute path
names.  With no parameter it switches the current name from relative to
absolute, or absolute to relative.  With '1' it converts the relative
path to absolute or leaves the absolute path unchanged.  With '0' it
converts the absolute path to relative or leaves the relative path
unchanged.

5 Configuration
***************

In this chapter we shall see how the menus and the key bindings of ne
can be completely configured.  Note that menu and key configuration is
parsed at startup time, and cannot be changed during the execution of
the program.  This is a chosen limitation.

   We will also see how to override incorrect or missing file name
extensions by comparing the contents of documents to patterns to
determine _virtual extensions_.

5.1 Key Bindings
================

ne allows you to associate any keystroke with any command.  To
accomplish this task, you have to create a (possibly UTf-8) file named
'.keys' in your '~/.ne' directory.  You can change the default name
(possibly specifying a complete path) using the '--keys' argument (*note
Arguments::).

   The format of the file is very simple: each line starting with the
'KEY' sequence of capital characters is considered the description of a
key binding.  Each line starting with 'SEQ' binds a character sequence
to a key.  All other lines are considered comments.  The format of a key
binding description is

     KEY HEXCODE COMMAND

   The HEXCODE value is the ASCII code of the keystroke.  (For special
keys such as <Insert> or function keys, you should take a look at the
file 'default.keys' that comes with ne's distribution: it contains a
complete, commented definition of ne's standard bindings that you can
modify with a trial-and-error approach.)  The easiest way to see the
code ne uses for a given key is by using the *note KeyCode:: command.
It prompts you to press a key, then reports the code for that key on the
status bar.  It also displays the command bound to that key if there is
one.

   You can write just the hexadecimal digits, nothing else is necessary
(but a prefixing '0x' is tolerated).  For instance,

     KEY 1 MoveSOL

binds to '<Control>-A' the action of moving to the start of a line,
while

     KEY 101 LineUp

binds to the "cursor-up" key the action of moving the cursor one line
up.

   COMMAND can be any ne command, including 'Escape' (which allows
reconfiguring the menu activator) and 'Macro', which allows binding
complex sequences of actions to a single keystroke.  The binding of a
macro is very fast because on the first call the macro is cached in
memory.  *Note Macro::.

   Note that you cannot _ever_ redefine <Return> or <Escape>.  This is a
basic issue--however brain damaged is the current configuration, you
will always be able to exploit fully the menus and the command line.

   Besides the "standard" combinations (e.g., '<Control>-LETTER'), it
possible to program combinations based on the <Meta> key (a.k.a.
<Alt>).  The situation in this case is a bit more involved, because
depending on the terminal emulator you are using, the effect of the
<Meta> key can be widely different.  For instance, 'xterm' raises the
eighth bit of a character, so, for instance,

     KEY 81 MoveSOF

binds '<Control>-<Meta>-a' to the action of moving to the start of the
document.  However, 'gnome-terminal' will emit the character of ASCII
code 1 prefixed with ESC instead ("'\x1b\x01'").  To handle this case,
ne provides codes from 180 on for _simulated <Meta> sequences_: for
instance,

     KEY 181 MoveSOF

binds the abovementioned sequence to the same action as before.  In
general, the code 180+X corresponds to the sequence ESC followed by the
ASCII character of code X.  Note that some of these sequences may be
disabled, if they conflict with existing sequences of your terminal (for
instance, ESC followed by 'O' is always disabled because it prefixes
several built-in keyboard sequences).

   As a final note, we remark that typing '<Meta>-a' on 'gnome-terminal'
will produce an ESC followed by 'a' ("'\x1ba'").  Since it is obviously
easier to press just <Meta> rather than <Meta> and <Control> at the same
time, it is a good idea to associate the same sequence also to this
combination, using

     KEY 1E1 MoveSOF

Moreover, this setting provides the user with a second choice: one can
press <Escape> followed by a letter instead of using modifiers.

   This is the approach used by default in ne: this way, <Control>
with <Meta> plus a letter should always work, and <Meta> should work
sometimes (of course, if you're sure to use always the same kind of
emulator you can bind more features).  Again, the best place to look at
it's 'default.keys'.

   As stated above, each line starting with 'SEQ' binds a character
sequence to a key code.  The format for a 'SEQ' binding is

     SEQ "SEQUENCE" HEXCODE

where "SEQUENCE" is a double-quoted string of characters (which can
include escaped hexadecimals) followed by a hexadecimal key code as
described above for 'KEY' definitions.

   You should rarely need this, as properly configured systems already
do this for most keys.  However, some key combinations (<Control> in
conjunction with cursor keys for example) are usually not defined.  If
you know the character sequence your system generates for such a
combination, you may use 'SEQ' to bind that sequence to a particular key
code if that sequence isn't already defined on your system.  For
example, <Control>-"cursor-left" may generate the sequence '\x1b[1;5D'.
The following lines bind that sequence to the <f10> key code '14A', then
bind that key code to the 'HELP' command.

     SEQ  "\x1b[1;5D"  14A
     KEY  14A          HELP

   Sequences are inherently terminal- or terminal emulator-specific, so
their utility will vary depending on how many emulators you use.  At
least they give you the posibility to use keys or key combinations that
aren't covered by 'curses'.

   The key binding file is parsed at startup.  If something does not
work, ne exits displaying an error message.  If you want ne to skip
parsing the key binding file (for instance, to correct the broken file),
just give ne the '--no-config' argument.  *Note Arguments::.

5.2 Changing Menus
==================

ne allows you to change the contents of its menus.  To accomplish this
task, you have to create a file named '.menus' in your home directory,
or in '~/.ne'.  You can change the default name (possibly specifying a
complete path) using the '--menus' argument (*note Arguments::).

   Each line of a menu configuration file not starting with the 'MENU'
or 'ITEM' keywords is considered a comment.  You should describe the
menus as in the following example:

     MENU "File"
     ITEM "Open...     ^O" Open
     ITEM "Close         " Close
     ITEM "DoIt          " Macro DoIt

   In other words: a line of this form
     MENU "TITLE"
   will start the definition of a new menu, having the given title.
Each line of the form
     ITEM "TEXT" COMMAND
   will then define a menu item, and associate the given command to it.

   Any number of menus can be accommodated, but you should consider that
many terminals are 80 columns wide.  There is also a minor restriction
on the items--their width has to be constant throughout each menu (but
different menus can have different widths).  Note that the text of an
item, as the name of a menu, is between quotes.  Whatever follows the
last quote is considered the command associated to the menu.

*Warning:* the description of key bindings in menus ('^O' in the
previous example) is very important for the beginner; there is no
relation inside ne about what you say in the menu and how you
configure the key bindings (*note Key Bindings::).  Please do not say
things in the menus that are not true in the key binding file.

   The menu configuration file is parsed at startup.  If something does
not work, ne exits displaying an error message.  If you want ne to
skip the menu configuration phase (for instance, to correct the broken
file), just give ne the '--no-config' argument.  *Note Arguments::.

5.3 Virtual Extensions
======================

When a document is loaded or saved under a different name, ne may
examine the contents of the document to determine whether to ignore the
corresponding file's actual or missing extension and use instead a
"virtual extension".  This affects which AutoPrefs and Syntax settings
ne applies to the document.

   The document's contents are matched against the regular expressions
(see *note Regular Expressions::) you include in your
'~/.ne/.extensions' file.  (There may also be an 'extensions' file (no
leading '.') in the global directory.)  If ne finds a match it will
act as if the document's name had the corresponding extension.

   Note that by default ne does not override a file's given extension.
However, you can specify any number of extensions that you would like to
allow to be overridden by including lines in your '~/.ne/extensions'
containing only a dot followed by a single extension or shell "glob
pattern".  In particular, '.*"' would allow overriding all extensions.

Here's an example '~/.ne/.extensions' file:

     # The following patterns match some common command interpreters.
     # They must match on the first line.
      sh   1  ^#!\s*/.*\b(bash|sh|ksh|zsh)\s*
      csh  1  ^#!\s*/.*\b(csh|tcsh)\s*
      pl   1  ^#!\s*/.*\bperl\b
      py   1  ^#!\s*/.*\bpython[0-9]*\s*
      rb   1  ^#!\s*/.*\bruby\s*
      xml  1  ^<\?xml
     # These must match in the first 30 and 1000 lines, respectively.
      yaml   30  ^\+\+\+$
      ini  1000i ^\[\s*(\w|[.-])+\s*\]\s*$
     # You must list the existing extensions you wish to override, one
     # per line. Shell glob patterns are allowed. Note that ".*" would
     # allow overriding any extension. (Think before you do that!)
     .conf
     .tx[0-9]

The only lines which matter consist of a space-delimited set of
  extension   number   regular_expression
or a single '.' followed by a glob pattern.  Anything else is treated as
a comment.  The number must be a positive integer indicating the maximum
line number of the document in which the corresponding regular
expression must match.  The exception is zero, which allows a match on
any line in the document.  (Actually, ne restricts the examined portion
of the document to the first 1,000,000 bytes.)  If the number has a
lower-case 'i' suffix (see the 'ini' example above), the corresponding
regular expression is not case sensitive.  Trailing spaces are not
included as part of the regular_expression.

   Only the last instance of any extension specification is considered.
This allows you to override any specifications from the global
'extensions' file.  If you really need two different patterns, join them
into one by concatenating them with a '|' like so:
  foo  1000i  (pattern_A)|(pattern_B)

6 Hints and Tricks
******************

_Use <f1> or <Escape>-<Escape>, not <Escape>._
     Due to the limitations of the techniques used when communicating
     with a terminal, it is not possible to "decide" that the user
     pressed the <Escape> key for about a second after the actual key
     press (*note EscapeTime::).  This means that you will experience
     annoying delays when using menus.  If you have no <f1> key, use
     <Escape>-<Escape>, or redefine a keystroke assigning the command
     'Escape', and you will be able to use that keystroke instead of
     <Escape>.  Unfortunately, some GUI-based terminals (most notably,
     'gnome-terminal') use <f1> for their own purposes; in that case,
     you can assign the 'Escape' command to another key (*note
     Configuration::).

_Check for the presence of a <Meta> key._
     If your system has a standard <Meta> or <Alt> key, there is a good
     chance that you have several other shortcuts.  If the built-in
     <Meta> bindings do not work, you must discover which is the effect
     of the <Meta> in your terminal emulator.  Indeed, it is possible in
     theory to configure about 150 shortcuts.  *Note Configuration::.
     In any case, prefixing a key with <Escape> has the same effect as
     holding down <Meta>, so with the standard key bindings you can, for
     instance, advance by word with '<Escape>' followed by 'F'.

_When editing very large files, please use the '--no-syntax' option._
     Even if ne will switch transparently to memory-mapped disk files,
     syntax highlighting requires a great deal of additional memory.

_Mac users should turn on "Delete sends CTRL-H" in the 'Terminal' settings._
     If you are a Mac user, you need to check the "Delete sends CTRL-H"
     option in the 'Advanced' tab of the 'Terminal' application
     settings.

_ne does tilda expansion._
     When you have to specify a file name, you can always start with
     '~/' in order to specify your home directory, or '~USER/' to
     specify the home directory of another user.

_It is easy to correct bad colors._
     Sometimes, due to different opinions about the best default
     foreground and background colors, some of the color choices in a
     syntax file might be unreadable (for instance, 'dim white' on a
     terminal with a white background).  Just copy the guilty syntax
     specification file to the '~/.ne/syntax' directory, and change the
     color names at the start of the file.

_Use the 'tabs' syntax to distinguish TABs from SPACEs._
     When you're struggling to clean up a mix of TABs and SPACEs,
     temporarily switching to the 'tabs' syntax may help.  The command
     'Syntax tabs' makes TAB characters show up in a different
     background color from SPACEs.  Once you've gotten your white space
     issues straightened out, you can switch back to the syntax
     appropriate for your current file type.

_ne does interactive filename completion._
     When you have to specify a file name as last element of a long
     input, you can invoke the completer using <Tab>.  If you hit it
     twice in a row, you will enter the file requester, where you can
     navigate and escape back to the command line, either with <f1>,
     which will let you edit again your previous input, or with <Tab>,
     which will copy your current selection over your previous file
     name.  In other words, you can freely alternate completion, editing
     and browsing.

_Disable the status bar for slow connections._
     ne tries to emit as few characters as possible when updating the
     screen.  However, for each key you type it is likely that the
     status bar has to be updated.  If your connection is very slow, you
     can disable the status bar to get a quicker response (*note
     StatusBar::).

_The <Escape> delay when activating menus can be avoided._
     If you press after <Escape> any key that does not produce the
     second character of an escape sequence, ne will immediately
     recognize the <Escape> key code as such.  Since non-alphabetical
     keys have no effect while browsing through the menus, if you're
     forced to use <Escape> as menu activator you can press, for
     instance, ',' just after it to speed up the menu activation (note
     that ':' would not work, because it would activate the command
     line).  Alternatively, you can just type <Escape> twice in a row.

_Use turbo mode for lengthy operations._
     Turbo mode (*note Turbo::) allows performing very complex
     operations without updating the screen until the operations are
     complete.  This can be a major plus if you are editing very long
     files, or if your terminal is slow.  If the default value (0, which
     means twice the number of visible rows) does not give you the best
     results, experiment other values.

_Regular expressions are powerful, and slow._
     Regular expressions must be studied very carefully.  If you spend a
     lot of time doing editing, it is definitely reasonable to study
     even their most esoteric features.  Very complex editing actions
     can be performed by a single find/replace using the '\N'
     convention.  But remember always that regular expressions are much
     slower than a normal search: in particular, if you use them on a
     UTF-8 text, ne has to transform them into an equivalent (but more
     complex) expression that cannot match partially a UTF-8 sequence,
     and this expansion makes the search even slower.

_Use the correct movement commands in a macro._
     Many boring, repetitive editing actions can be performed in a
     breeze by recording them the first time.  Remember, however, that
     while recording a complex macro you should always use a cursor
     movement that will apply in a different context.  For instance, if
     you are copying a word, you cannot move with cursor keys, because
     that word at another application of the macro could be of a
     different length.  Rather, use the next/previous word keys and the
     'MoveEOW' command, which guarantee a correct behaviour in all
     situations.

_Some preferences can be preserved even with automatic preferences._
     When you save an autoprefs file, the file simply contains a macro
     that, when executed, produces the current configuration.  However,
     you could want, for instance, to never change the insert/overwrite
     state.  In this case, just edit the autoprefs files with ne and
     delete the line containing the command setting the insert flag.
     When the autoprefs are loaded later, the insert flag will be left
     untouched.  This trick is particularly useful with the 'StatusBar'
     and 'FastGUI' commands.

_If some keystrokes do not work, check for system-specific features._
     Sometimes it can happen that a keystroke does not work--for
     instance, '<Control>-O' does not open a file.  This usually is due
     to the kernel tracking that key for its purposes.  For instance,
     along a 'telnet' connection with xon/xoff flow control,
     '<Control>-S' and '<Control>-Q' would block and release the output
     instead of saving and quitting.

     In these cases, if you do not need the system feature you should
     check how to disable it: for instance, some BSD-like systems
     feature a delayed suspend signal that is not in the POSIX standard,
     and thus cannot be disabled by ne.  On HP-UX, the command 'stty
     dsusp ^-' would disable the signal, and would let the control
     sequence previously assigned to it to run up to ne.

7 Motivations and Design
************************

In this chapter I will try to outline the rationale behind ne's design
choices.  Moreover, some present, voluntary limitations of the current
implementation will be described.  The intended audience of such a
description is the programmer wanting to hack up ne's sources, or the
informed user wanting to deepen his knowledge of the limitations.

   The design goal of ne was to write an editor that is easy to use at
first sight, powerful, and completely configurable.  Making ne run on
any terminal that 'vi' could handle was also a basic issue, because
there is no use getting accustomed to a new tool if you cannot use it
when you really need it.  Finally, using resources sparingly was
considered essential.

   ne has no concept of _mode_.  All shortcuts are defined by a single
key, possibly with a modifier (such as <Control> or <Meta>).  Modality
is in my opinion a Bad Thing unless it has a very clear visual feedback.
As an example, menus are a form of modality.  After entering the menus,
the alphabetic keys and the navigation keys have a different meaning.
But the modality is clearly reflected by a change in the user interface.
The same can be said about the input line, because it is always preceded
by a (possibly highlighted) prompt ending with a colon.

   ne has no sophisticated visual updating system similar to, for
instance, the one of 'curses'.  All updating is done while manipulating
the text, and only if the turbo flag is set can some iterated operations
delay the update.  (In this case, ne keeps track in a very rough way
of the part of the screen that changed.)  Moreover, the output is not
preempted by additional input coming in, so that along a slow connection
the output could not keep up with the input.  However, along reasonably
fast connections, the responsiveness of the editor is greatly enhanced
by the direct update.  And since we update the screen in parallel with
the internal representation, we can exploit our knowledge to output a
very small number of characters per modification.  As it is typical in
ne, when such design tradeoffs arise, preference is given to the
solution that is effective on a good part of the existing hardware and
will be very effective on most future hardware.

   ne uses a particular scheme for handling text.  There is a doubly
linked list of line descriptors that contain pointers to each line of
text.  The lines themselves are kept in a list of pools, which is
expanded and reduced dynamically.  The interesting thing is that for
each pool ne keeps track just of the first and of the last character
used.  A character is free iff it contains a null, so there is no need
for a list of free chunks.  The point is that the free characters lying
between that first and the last used characters (the "lost" characters)
can only be allocated _locally_: whenever a line has to grow in length,
ne first checks if there are enough free characters around it.
Otherwise, it remaps the line elsewhere.  Since editing is essentially a
local activity, the number of such lost characters remains very low.
And the manipulation of a line is extremely fast and independent of the
size of the file, which can be very huge.  A mathematical analysis of
the space/time tradeoff is rather difficult, but empirical evidence
suggests that the idea works.

   ne takes the POSIX standard as the basis for UN*X compatibility.
The fact that this standard has been designed by a worldwide recognized
and impartial organization such as IEEE makes it in my opinion the most
interesting effort in its league.  No attempt is made to support ten
thousand different versions and releases by using conditional
compilation.  Very few assumptions are made about the behaviour of the
system calls.  This has obvious advantages in terms of code testing,
maintenance, and reliability.  For the same reasons, the availability of
an ANSI C (C99) compiler is assumed.

   If the system has a 'terminfo' database and the related functions
(which are usually contained in 'curses' library), ne will use them.
The need for a terminal capability database is clear, and the choice of
'terminfo' (with respect to 'termcap') is compulsory if you want to
support a series of features (such as more than ten function keys) that
'termcap' lacks.  If 'terminfo' is not available, ne can use a
'termcap' database, or, as a last resort, a built-in set of ANSI control
sequences.  Some details about this can be found in *note Portability
Problems::.

   ne does not allow redefinition of the <Escape>, <Tab> or <Return>
keys, nor of the interrupt character '<Control>-\'.  This decision has
been made mainly for two reasons.  First of all, it is necessary to keep
a user from transforming ne's bindings to such a point that another
unaware user cannot work with it.  These two keys and the alphabetic
keys allow activating any command without any further knowledge of the
key bindings, so it seems to me this is a good choice.  As a second
point, the <Escape> key usage should generally be avoided.  The reason
is that most escape sequences that are produced by special keys start
with the escape character.  When <Escape> is pressed, ne has to wait
for one second (this timing can be changed with the 'EscapeTime'
command), just to be sure that it did not receive the first character of
an escape sequence.  This makes the response of the key very slow,
unless it is immediately followed by another key such as ':', or by
<Escape>, again.  *Note Hints and Tricks::.

   Note that, as has been stated several times, the custom key bindings
also work when doing a long input, navigating through the menus or
browsing the requester.  However, this is only partially true.  To keep
the code size and complexity down, in these cases ne recognizes only
direct bindings to commands, and discards the arguments.  Thus, for
instance, if a key is bound to the command line 'LineUp 2', it will act
like 'LineUp', while a binding to 'Macro MoveItUp' would produce no
result.  Of course full binding capability is available while writing
text.  (This limitation will probably be lifted in a future version:
presently it does not seem to limit seriously the configurability of
ne.)

   ne has some restrictions in its terminal handling.  It does not
support highlighting on terminals that use a magic cookie.  Supporting
such terminals correctly is a royal pain, and I did not have any means
of testing the code anyway.  Moreover, they are rather obsolete.
Another lack of support is for the capability strings that specify a
file to print or a program to launch in order to initialize the
terminal.

   The macro capabilities of ne are rather limited.  For instance, you
cannot give an argument to a macro: macros are simply scripts that can
be played back automatically.  This makes them very useful for everyday
use in a learn/play context, but rather inflexible for extending the
capabilities of the editor.

   ne has been written with sparing resource use as a basic goal.
Every possible effort has been made to reduce the use of CPU time and
memory, the number of system calls, and the number of characters output
to the terminal.  For instance, command parsing is done through hash
techniques, and the escape sequence analysis uses the order structure of
strings for minimizing the number of comparisons.  The optimal cursor
motion functions were directly copied from 'emacs'.  The update of files
using syntax highlighting is as lazy as possible: modifications cause
just the update of the current line, and the rest of the screen is
updated only when you move away.  The search algorithm is a simplified
version of the Boyer-Moore algorithm that provides high performance with
a minimal setup time.  An effort has been taken to move to the text
segment all data that do not change during the program execution.  When
the status bar is switched off, additional optimizations reduce the
cursor movement to a minimum.

   A word should be said about lists.  Clearly, handling the text as a
single block with an insertion gap (a la 'emacs') allows you to gain
some memory.  However, the management of the text as a linked list
requires much less CPU time, and the tradeoff seems to be particularly
favorable on virtual memory systems, where moving the insertion gap can
require a lot of accesses to different pages.

8 The Encoding Mess
*******************

ne supports UTF-8.  It can use UTF-8 for its input/output, and it can
also interpret one or more documents as containing UTF-8 encoded text,
acting accordingly.  Note that the document content is actual UTF-8
text--ne does not use wide characters.  As a positive side-effect,
ne can support fully the ISO-10646 standard, but nonetheless non-UTF-8
texts occupy exactly one byte per character.

   More precisely, _any_ piece of text in ne is classified as
US-ASCII, 8-bit or UTF-8.  A US-ASCII text contains only US-ASCII
characters.  An 8-bit text sports a one-to-one correspondence between
characters and bytes, whereas an UTF-8 text is interpreted in UTF-8.  Of
course, this rises a difficult question: _when_ should a document be
classified as UTF-8?

   Character encodings are a mess.  There is nothing we can do to change
this fact, as character encodings are _metadata that modify data
semantics_.  The same file may represent different texts of different
lengths when interpreted with different encodings.  Thus, there is no
safe way of guessing the encoding of a file.

   ne stays on the safe side: it will never try to convert a file from
an encoding to another one.  It can, however, interpret data contained
in a document depending on an encoding: in other words, encodings are
truly treated as metadata.  You can switch off UTF-8 at any time, and
see the same document as a standard 8-bit file.

   Moreover, ne uses a _lazy_ approach to the problem: first of all,
unless the UTF-8 automatic detection flag is set (*note UTF8Auto::), no
attempt is ever made to consider a file as UTF-8 encoded.  Every file,
clip, command line, etc., is firstly scanned for non-US-ASCII
characters: if it is entirely made of US-ASCII characters, it is
classified as US-ASCII. An US-ASCII piece of text is compatible with
anything else--it may be pasted in any document, or, if it is a
document, it may accept any form of text.  Documents classified as
US-ASCII are distinguished by an 'A' on the status bar.

   As soon as a user action forces a choice of encoding (e.g., an
accented character is typed, or an UTF-8-encoded clip is pasted), ne
fixes the mode to 8-bit or UTF-8 (when there is a choice, this depends
on the value of the *note UTF8Auto:: flag).  Of course, in some cases
this may be impossible, and in that case an error will be reported.

   All this happens behind the scenes, and it is designed so that in 99%
of the cases there is no need to think of encodings.  In any case,
should ne's behaviour not match your needs, you can always change at
run time the level of UTF-8 support.

9 History
*********

The main inspiration for this work came from Martin Taillefer's
'TurboText' for the Amiga, which is the best editor I ever saw on any
computer.

   The first versions of ne were created on an Amiga 3000T, using the
port of the 'curses' library by Simon John Raybould.  After switching to
the lower-level 'terminfo' library, the development continued under
UN*X.  Finally, I ported 'terminfo' to the Amiga, thus making it
possible to develop on that platform again.  For ne 1.0, an effort has
been made to provide a 'terminfo' emulation using GNU's 'termcap'.  The
development eventually moved to Linux.

   Todd Lewis got involved with ne when the University of North
Carolina's Chapel Hill campus migrated its central research computers
from MVS to UNIX in 1995.  The readily available UNIX editors had
serious weaknesses in their user interfaces, especially from the
standpoint of MVS users who were not too excited about having to move
their projects to another platform while learning an entirely new suite
of tools.  ne offered an easily understood interface with enough
capabilities to keep these new UNIX users productive.  Todd installed
and has maintained ne at UNC since then, making several improvements
to the code to meet his users' needs.  In early 1999 his code base and
mine were merged to become version 1.17.

   Support for syntax highlighting was added in 2009 with code and
techniques heavily borrowed from the GNU-licensed editor 'joe', which
was written by Joseph H. Allen.  Much of the work to incorporate this
code into ne was undertaken by Daniele Filaretti, an undergraduate
student working under the direction of Sebastiano at the Universita'
degli Studi di Milano.

10 Portability Problems
***********************

This chapter is devoted to the description of the (hopefully very few)
problems that could arise when porting ne to other flavors of UN*X.

   The fact that only POSIX calls have been used (*note Motivations and
Design::) should guarantee that on POSIX-compliant systems a
recompilation should suffice.  Unfortunately, 'terminfo' has not been
standardized by IEEE, so that different calls could be available.  The
necessary calls are 'setupterm()', 'tparm()' and 'tputs()'.  The other
'terminfo' functions are never used.

   If 'terminfo' is not available, the source files 'info2cap.c' and
'info2cap.h' map 'terminfo' calls on 'termcap' calls.  The complete GNU
'termcap' sources are distributed with ne, so no library at all is
needed to use them.  You just have to compile using one of the options
explained in the 'makefile' and in the 'README'.  Should you need
comprehensive information on GNU 'termcap', you can find the
distribution files on any 'ftp' site that distributes the GNU archives.
I should note that the GNU 'termcap' manual is definitely the best
manual ever written about terminal databases.

   There are, however, some details that are not specified by POSIX, or
are specified with insufficient precision.  The places of the source
where such details come to the light are evidenced by the 'PORTABILITY
PROBLEM' string, which is followed by a complete explanation of the
problem.

   For instance, there is no standard way of printing extended ASCII
characters (i.e., characters whose code is smaller than 32 or greater
than 126).  On many system, these characters have to be filtered and
replaced with something printable: the default behaviour is to add 64 to
all characters under 32 (so that control characters will translate to
the respective letter) and to print them in reverse video; moreover, all
characters between 127 and 160 are visualized as a reversed question
mark (this works particularly well with ISO Latin 1, but Windows users
might not like it).  This behavior can be easily changed by modifying
the 'out()' function in 'term.c'.

   Note that it is certainly possible that some system features not
standardized by POSIX interfere with ne's use of the I/O stream.  Such
problems should be dealt with locally by using the system facilities
rather than by horribly '#ifdef''ing the source code.  An example is
given in *note Hints and Tricks::.

11 Acknowledgments
******************

A lot of people contributed to this project.  Part of the code comes
from 'emacs' and 'joe'.  Many people, in particular at the silab (the
Milan University Computer Science Department Laboratory), helped in beta
testing the first versions.  Daniele Filaretti worked at the integration
of syntax-highlighting code from 'joe'.  John Gabriele suggested several
new features and relentlessly tested them.

   Comments, complaints, desiderata are welcome.

         Sebastiano Vigna
         Via California 22
         I-20144 Milano MI
         Italia

         sebastiano.vigna@unimi.it


         Todd M. Lewis
         CB 1150 2210 ITS Franklin
         University of North Carolina
         Chapel Hill, NC 27599-1150
         USA

         Todd_Lewis@unc.edu


         ne home page: <http://ne.di.unimi.it/>
         Discuss ne at <http://groups.google.com/group/niceeditor/>
         Github repo: <https://github.com/vigna/ne/>


Concept Index
*************

* Menu:

* Amiga:                                 History.            (line 4907)
* Arguments:                             Arguments.          (line  708)
* Automatic Bracket Matching:            More Advanced Features.
                                                             (line  569)
* Automatic Completion:                  More Advanced Features.
                                                             (line  569)
* Automatic preferences:                 Basic Preferences.  (line  361)
* Automatic preferences <1>:             Automatic Preferences.
                                                             (line 1857)
* Binary files:                          More Advanced Features.
                                                             (line  569)
* Binary files <1>:                      Binary.             (line 3124)
* Block operations:                      Editing.            (line  296)
* Bookmarks:                             More Advanced Features.
                                                             (line  569)
* Buffer:                                Terminology.        (line  110)
* Caching a macro:                       Basic Macros.       (line  433)
* Changing colors:                       Hints and Tricks.   (line 4577)
* Clip usage:                            Editing.            (line  296)
* Closing a document:                    Loading and Saving. (line  237)
* Command arguments:                     General Guidelines. (line 1956)
* Command line:                          Starting.           (line  145)
* Command line <1>:                      The Command Line.   (line 1047)
* Commands:                              Commands.           (line 1947)
* Comments in a macro:                   Basic Macros.       (line  433)
* Configuring the keyboard:              Key Bindings.       (line 4354)
* Configuring the menus:                 Changing Menus.     (line 4477)
* Control key:                           Starting.           (line  145)
* curses:                                Motivations and Design.
                                                             (line 4715)
* Deleting characters:                   Editing.            (line  296)
* Deleting lines:                        Editing.            (line  296)
* Document:                              Terminology.        (line  110)
* Emergency Save:                        Emergency Save.     (line 1885)
* Escape conventions:                    General Guidelines. (line 1956)
* Escape usage:                          Hints and Tricks.   (line 4577)
* Escaping an input:                     The Input Line.     (line  969)
* Executing a macro:                     Basic Macros.       (line  433)
* Executing UNI*X commands:              More Advanced Features.
                                                             (line  568)
* Exiting:                               Loading and Saving. (line  237)
* Extension by Content:                  Virtual Extensions. (line 4519)
* Fast GUI:                              The Status Bar.     (line  840)
* Features:                              Introduction.       (line   33)
* File:                                  Terminology.        (line  110)
* File name completion:                  The Input Line.     (line  969)
* File requester:                        Loading and Saving. (line  237)
* File requester <1>:                    More Advanced Features.
                                                             (line  569)
* File requester <2>:                    The Requester.      (line 1074)
* Flags:                                 Basic Preferences.  (line  361)
* Flags <1>:                             General Guidelines. (line 1956)
* Global Directory:                      Arguments.          (line  708)
* Help requester:                        The Requester.      (line 1074)
* Immediate input:                       The Input Line.     (line  969)
* Input line:                            The Input Line.     (line  969)
* Insert mode:                           Basic Preferences.  (line  361)
* Interrupt character:                   Basic Macros.       (line  433)
* Interrupt character <1>:               Motivations and Design.
                                                             (line 4715)
* Interrupting a macro:                  Basic Macros.       (line  433)
* Interrupting directory scanning:       The Requester.      (line 1074)
* ISO-8859 family:                       The Encoding Mess.  (line 4857)
* ISO-8859-1:                            The Encoding Mess.  (line 4857)
* Key bindings:                          Key Bindings.       (line 4354)
* Keyboard usage:                        Starting.           (line  145)
* Large files:                           Hints and Tricks.   (line 4577)
* Line and column numbers:               The Status Bar.     (line  840)
* LITHP:                                 Introduction.       (line   33)
* Loading a file:                        Loading and Saving. (line  237)
* Long input:                            The Input Line.     (line  969)
* Long names:                            General Guidelines. (line 1956)
* Macro definition:                      Basic Macros.       (line  433)
* Magic cookie terminals:                Motivations and Design.
                                                             (line 4715)
* Menu bar:                              Starting.           (line  145)
* Menu usage:                            Starting.           (line  145)
* Menus:                                 Menus.              (line 1242)
* Meta key:                              Starting.           (line  145)
* Meta key <1>:                          Configuration.      (line 4342)
* Meta key <2>:                          Hints and Tricks.   (line 4577)
* Mode:                                  Motivations and Design.
                                                             (line 4715)
* MS-DOS files:                          More Advanced Features.
                                                             (line  569)
* Multiple documents:                    Editing.            (line  296)
* Opening a file:                        Loading and Saving. (line  237)
* Portability:                           Portability Problems.
                                                             (line 4941)
* POSIX:                                 Introduction.       (line   33)
* POSIX <1>:                             Motivations and Design.
                                                             (line 4715)
* POSIX <2>:                             Portability Problems.
                                                             (line 4941)
* Preferences:                           Basic Preferences.  (line  361)
* Printable characters:                  Portability Problems.
                                                             (line 4941)
* Quitting:                              Loading and Saving. (line  237)
* Quoting conventions:                   General Guidelines. (line 1956)
* Recording a macro:                     Basic Macros.       (line  433)
* Regular Expressions:                   Regular Expressions.
                                                             (line 1612)
* Repeating actions:                     General Guidelines. (line 1956)
* Requester:                             The Requester.      (line 1074)
* Resource usage:                        Motivations and Design.
                                                             (line 4715)
* Saving a file:                         Loading and Saving. (line  237)
* Saving a macro:                        Basic Macros.       (line  433)
* Setting configuration file names:      Arguments.          (line  708)
* Short names:                           General Guidelines. (line 1956)
* Shortcuts:                             Starting.           (line  145)
* Shortcuts not working:                 Hints and Tricks.   (line 4577)
* Skipping configuration files:          Arguments.          (line  708)
* Startup macro:                         Arguments.          (line  708)
* Status bar:                            Starting.           (line  145)
* Status bar <1>:                        The Status Bar.     (line  840)
* Syntax Highlighting:                   Syntax Highlighting.
                                                             (line 1162)
* termcap:                               Introduction.       (line   33)
* termcap <1>:                           Motivations and Design.
                                                             (line 4715)
* termcap <2>:                           Portability Problems.
                                                             (line 4941)
* terminfo:                              Introduction.       (line   33)
* terminfo <1>:                          Motivations and Design.
                                                             (line 4715)
* terminfo <2>:                          Portability Problems.
                                                             (line 4941)
* Turbo adjustment:                      Hints and Tricks.   (line 4577)
* TurboText:                             History.            (line 4907)
* Undeleting lines:                      Editing.            (line  296)
* Unloading macros:                      Basic Macros.       (line  433)
* UTF-8:                                 The Encoding Mess.  (line 4857)
* UTF-8 support:                         More Advanced Features.
                                                             (line  569)
* UTF-8 Support:                         UTF-8 Support.      (line 1894)
* vi:                                    Introduction.       (line   33)
* Virtual Extensions:                    Basic Preferences.  (line  361)
* Virtual Extensions <1>:                Virtual Extensions. (line 4519)
* Writing a file:                        Loading and Saving. (line  237)

Command Index
*************

* Menu:

* About:                                 About.              (line 4190)
* AdjustView:                            AdjustView.         (line 3937)
* Alert:                                 Alert.              (line 4200)
* AtomicUndo:                            AtomicUndo.         (line 2876)
* AutoComplete:                          AutoComplete.       (line 2635)
* AutoIndent:                            AutoIndent.         (line 3017)
* AutoMatchBracket:                      AutoMatchBracket.   (line 2589)
* AutoPrefs:                             AutoPrefs.          (line 3106)
* Backspace:                             Backspace.          (line 4139)
* Beep:                                  Beep.               (line 4208)
* Binary:                                Binary.             (line 3124)
* Capitalize:                            Capitalize.         (line 2975)
* CaseSearch:                            CaseSearch.         (line 2620)
* Center:                                Center.             (line 2908)
* Clear:                                 Clear.              (line 2167)
* ClipNumber:                            ClipNumber.         (line 2393)
* CloseDoc:                              CloseDoc.           (line 2177)
* Copy:                                  Copy.               (line 2286)
* CRLF:                                  CRLF.               (line 3440)
* Cut:                                   Cut.                (line 2299)
* DeleteChar:                            DeleteChar.         (line 4103)
* DeleteEOL:                             DeleteEOL.          (line 4170)
* DeleteLine:                            DeleteLine.         (line 4158)
* DeleteNextWord:                        DeleteNextWord.     (line 4128)
* DeletePrevWord:                        DeletePrevWord.     (line 4116)
* DelTabs:                               DelTabs.            (line 3342)
* DoUndo:                                DoUndo.             (line 2852)
* Erase:                                 Erase.              (line 2327)
* Escape:                                Escape.             (line 4304)
* EscapeTime:                            EscapeTime.         (line 3291)
* Exec:                                  Exec.               (line 4217)
* Exit:                                  Exit.               (line 2141)
* FastGUI:                               FastGUI.            (line 3167)
* Find:                                  Find.               (line 2434)
* FindRegExp:                            FindRegExp.         (line 2449)
* Flags:                                 Flags.              (line 3068)
* Flash:                                 Flash.              (line 4234)
* FreeForm:                              FreeForm.           (line 3189)
* GotoBookmark:                          GotoBookmark.       (line 4012)
* GotoColumn:                            GotoColumn.         (line 3769)
* GotoLine:                              GotoLine.           (line 3756)
* GotoMark:                              GotoMark.           (line 3780)
* Help:                                  Help.               (line 4243)
* HexCode:                               HexCode.            (line 3266)
* Insert:                                Insert.             (line 3152)
* InsertChar:                            InsertChar.         (line 4054)
* InsertLine:                            InsertLine.         (line 4148)
* InsertString:                          InsertString.       (line 4078)
* InsertTab:                             InsertTab.          (line 4093)
* KeyCode:                               KeyCode.            (line 4314)
* LineDown:                              LineDown.           (line 3747)
* LineUp:                                LineUp.             (line 3738)
* LoadAutoPrefs:                         LoadAutoPrefs.      (line 3560)
* LoadPrefs:                             LoadPrefs.          (line 3526)
* Macro:                                 Macro.              (line 2715)
* Mark:                                  Mark.               (line 2247)
* MarkVert:                              MarkVert.           (line 2262)
* MatchBracket:                          MatchBracket.       (line 2577)
* Modified:                              Modified.           (line 3589)
* MoveBOS:                               MoveBOS.            (line 3877)
* MoveEOF:                               MoveEOF.            (line 3886)
* MoveEOL:                               MoveEOL.            (line 3852)
* MoveEOW:                               MoveEOW.            (line 3902)
* MoveIncDown:                           MoveIncDown.        (line 3925)
* MoveIncUp:                             MoveIncUp.          (line 3913)
* MoveLeft:                              MoveLeft.           (line 3720)
* MoveRight:                             MoveRight.          (line 3729)
* MoveSOF:                               MoveSOF.            (line 3894)
* MoveSOL:                               MoveSOL.            (line 3860)
* MoveTOS:                               MoveTOS.            (line 3869)
* NameConvert:                           NameConvert.        (line 4329)
* NewDoc:                                NewDoc.             (line 2156)
* NextDoc:                               NextDoc.            (line 2187)
* NextPage:                              NextPage.           (line 3803)
* NextWord:                              NextWord.           (line 3843)
* NoFileReq:                             NoFileReq.          (line 3210)
* NOP:                                   NOP.                (line 4260)
* Open:                                  Open.               (line 2042)
* OpenClip:                              OpenClip.           (line 2360)
* OpenMacro:                             OpenMacro.          (line 2751)
* OpenNew:                               OpenNew.            (line 2063)
* PageDown:                              PageDown.           (line 3823)
* PageUp:                                PageUp.             (line 3814)
* Paragraph:                             Paragraph.          (line 2919)
* Paste:                                 Paste.              (line 2307)
* PasteVert:                             PasteVert.          (line 2317)
* Play:                                  Play.               (line 2697)
* PopPrefs:                              PopPrefs.           (line 3498)
* PreserveCR:                            PreserveCR.         (line 3422)
* PrevDoc:                               PrevDoc.            (line 2195)
* PrevPage:                              PrevPage.           (line 3792)
* PrevWord:                              PrevWord.           (line 3832)
* PushPrefs:                             PushPrefs.          (line 3471)
* Quit:                                  Quit.               (line 2132)
* ReadOnly:                              ReadOnly.           (line 3275)
* Record:                                Record.             (line 2673)
* Redo:                                  Redo.               (line 2823)
* Refresh:                               Refresh.            (line 4268)
* RepeatLast:                            RepeatLast.         (line 2543)
* Replace:                               Replace.            (line 2464)
* ReplaceAll:                            ReplaceAll.         (line 2526)
* ReplaceOnce:                           ReplaceOnce.        (line 2513)
* RequestOrder:                          RequestOrder.       (line 3223)
* RightMargin:                           RightMargin.        (line 2984)
* Save:                                  Save.               (line 2072)
* SaveAll:                               SaveAll.            (line 2113)
* SaveAs:                                SaveAs.             (line 2092)
* SaveAutoPrefs:                         SaveAutoPrefs.      (line 3570)
* SaveClip:                              SaveClip.           (line 2377)
* SaveDefPrefs:                          SaveDefPrefs.       (line 3580)
* SaveMacro:                             SaveMacro.          (line 2768)
* SavePrefs:                             SavePrefs.          (line 3546)
* SearchBack:                            SearchBack.         (line 2603)
* SelectDoc:                             SelectDoc.          (line 2203)
* SetBookmark:                           SetBookmark.        (line 3992)
* Shift:                                 Shift.              (line 2336)
* ShiftTabs:                             ShiftTabs.          (line 3354)
* StatusBar:                             StatusBar.          (line 3241)
* Suspend:                               Suspend.            (line 4282)
* Syntax:                                Syntax.             (line 3607)
* System:                                System.             (line 4291)
* Tabs:                                  Tabs.               (line 3322)
* TabSize:                               TabSize.            (line 3310)
* Through:                               Through.            (line 2407)
* ToggleSEOF:                            ToggleSEOF.         (line 3966)
* ToggleSEOL:                            ToggleSEOL.         (line 3979)
* ToLower:                               ToLower.            (line 2967)
* ToUpper:                               ToUpper.            (line 2949)
* Turbo:                                 Turbo.              (line 3366)
* UndelLine:                             UndelLine.          (line 2834)
* Undo:                                  Undo.               (line 2811)
* UnloadMacros:                          UnloadMacros.       (line 2791)
* UnsetBookmark:                         UnsetBookmark.      (line 4035)
* UTF8:                                  UTF8.               (line 3656)
* UTF8Auto:                              UTF8Auto.           (line 3679)
* UTF8IO:                                UTF8IO.             (line 3696)
* VerboseMacros:                         VerboseMacros.      (line 3398)
* VisualBell:                            VisualBell.         (line 3458)
* WordWrap:                              WordWrap.           (line 2999)


1 Introduction
2 Basics
  2.1 Terminology
  2.2 Starting
  2.3 Loading and Saving
  2.4 Editing
  2.5 Basic Preferences
  2.6 Basic Macros
  2.7 More Advanced Features
    2.7.1 UTF-8 support
    2.7.2 Bookmarks
    2.7.3 Automatic Completion
    2.7.4 Automatic Bracket Matching
    2.7.5 MS-DOS files
    2.7.6 Binary files
    2.7.7 File requester
    2.7.8 Executing UN*X commands
    2.7.9 Advanced key bindings
3 Reference
  3.1 Arguments
  3.2 The Status Bar
  3.3 The Input Line
  3.4 The Command Line
  3.5 The Requester
  3.6 Syntax Highlighting
  3.7 Menus
    3.7.1 File
    3.7.2 Documents
    3.7.3 Edit
    3.7.4 Search
    3.7.5 Macros
    3.7.6 Extras
    3.7.7 Navigation
    3.7.8 Prefs
  3.8 Regular Expressions
    3.8.1 Syntax
    3.8.2 Replacing regular expressions
  3.9 Automatic Preferences
  3.10 Emergency Save
  3.11 UTF-8 Support
4 Commands
  4.1 General Guidelines
  4.2 File Commands
    4.2.1 Open
    4.2.2 OpenNew
    4.2.3 Save
    4.2.4 SaveAs
    4.2.5 SaveAll
  4.3 Document Commands
    4.3.1 Quit
    4.3.2 Exit
    4.3.3 NewDoc
    4.3.4 Clear
    4.3.5 CloseDoc
    4.3.6 NextDoc
    4.3.7 PrevDoc
    4.3.8 SelectDoc
  4.4 Clip Commands
    4.4.1 Mark
    4.4.2 MarkVert
    4.4.3 Copy
    4.4.4 Cut
    4.4.5 Paste
    4.4.6 PasteVert
    4.4.7 Erase
    4.4.8 Shift
    4.4.9 OpenClip
    4.4.10 SaveClip
    4.4.11 ClipNumber
    4.4.12 Through
  4.5 Search Commands
    4.5.1 Find
    4.5.2 FindRegExp
    4.5.3 Replace
    4.5.4 ReplaceOnce
    4.5.5 ReplaceAll
    4.5.6 RepeatLast
    4.5.7 MatchBracket
    4.5.8 AutoMatchBracket
    4.5.9 SearchBack
    4.5.10 CaseSearch
    4.5.11 AutoComplete
  4.6 Macros Commands
    4.6.1 Record
    4.6.2 Play
    4.6.3 Macro
    4.6.4 OpenMacro
    4.6.5 SaveMacro
    4.6.6 UnloadMacros
  4.7 Undo Commands
    4.7.1 Undo
    4.7.2 Redo
    4.7.3 UndelLine
    4.7.4 DoUndo
    4.7.5 AtomicUndo
  4.8 Formatting Commands
    4.8.1 Center
    4.8.2 Paragraph
    4.8.3 ToUpper
    4.8.4 ToLower
    4.8.5 Capitalize
    4.8.6 RightMargin
    4.8.7 WordWrap
    4.8.8 AutoIndent
  4.9 Preferences Commands
    4.9.1 Flags
    4.9.2 AutoPrefs
    4.9.3 Binary
    4.9.4 Insert
    4.9.5 FastGUI
    4.9.6 FreeForm
    4.9.7 NoFileReq
    4.9.8 RequestOrder
    4.9.9 StatusBar
    4.9.10 HexCode
    4.9.11 ReadOnly
    4.9.12 EscapeTime
    4.9.13 TabSize
    4.9.14 Tabs
    4.9.15 DelTabs
    4.9.16 ShiftTabs
    4.9.17 Turbo
    4.9.18 VerboseMacros
    4.9.19 PreserveCR
    4.9.20 CRLF
    4.9.21 VisualBell
    4.9.22 PushPrefs
    4.9.23 PopPrefs
    4.9.24 LoadPrefs
    4.9.25 SavePrefs
    4.9.26 LoadAutoPrefs
    4.9.27 SaveAutoPrefs
    4.9.28 SaveDefPrefs
    4.9.29 Modified
    4.9.30 Syntax
    4.9.31 UTF8
    4.9.32 UTF8Auto
    4.9.33 UTF8IO
  4.10 Navigation Commands
    4.10.1 MoveLeft
    4.10.2 MoveRight
    4.10.3 LineUp
    4.10.4 LineDown
    4.10.5 GotoLine
    4.10.6 GotoColumn
    4.10.7 GotoMark
    4.10.8 PrevPage
    4.10.9 NextPage
    4.10.10 PageUp
    4.10.11 PageDown
    4.10.12 PrevWord
    4.10.13 NextWord
    4.10.14 MoveEOL
    4.10.15 MoveSOL
    4.10.16 MoveTOS
    4.10.17 MoveBOS
    4.10.18 MoveEOF
    4.10.19 MoveSOF
    4.10.20 MoveEOW
    4.10.21 MoveIncUp
    4.10.22 MoveIncDown
    4.10.23 AdjustView
    4.10.24 ToggleSEOF
    4.10.25 ToggleSEOL
    4.10.26 SetBookmark
    4.10.27 GotoBookmark
    4.10.28 UnsetBookmark
  4.11 Editing Commands
    4.11.1 InsertChar
    4.11.2 InsertString
    4.11.3 InsertTab
    4.11.4 DeleteChar
    4.11.5 DeletePrevWord
    4.11.6 DeleteNextWord
    4.11.7 Backspace
    4.11.8 InsertLine
    4.11.9 DeleteLine
    4.11.10 DeleteEOL
  4.12 Support Commands
    4.12.1 About
    4.12.2 Alert
    4.12.3 Beep
    4.12.4 Exec
    4.12.5 Flash
    4.12.6 Help
    4.12.7 NOP
    4.12.8 Refresh
    4.12.9 Suspend
    4.12.10 System
    4.12.11 Escape
    4.12.12 KeyCode
    4.12.13 NameConvert
5 Configuration
  5.1 Key Bindings
  5.2 Changing Menus
  5.3 Virtual Extensions
6 Hints and Tricks
7 Motivations and Design
8 The Encoding Mess
9 History
10 Portability Problems
11 Acknowledgments
Concept Index
Command Index
