htmldoc(1)

NAME
htmldoc - convert html source files into html, postscript, or pdf.

SYNOPSIS
htmldoc [options] filename1.{html,md} [ ... filenameN.{html,md} ]

htmldoc [options] -

htmldoc [filename.book]

DESCRIPTION
Htmldoc(1) converts HTML and Markdown source files into indexed HTML, PostScript, or Portable Document Format (PDF) files that can be viewed online or printed. With no options a HTML document is produced on stdout.

The second form of htmldoc reads HTML source from stdin, which allows you to use htmldoc as a filter.

The third form of htmldoc launches a graphical interface that allows you to change options and generate documents interactively.

COMMON MISTAKES
There are two types of HTML files - structured documents using headings (H1, H2, etc.) which htmldoc calls "books", and unstructured documents that do not use headings which htmldoc calls "web pages".

A very common mistake is to try converting a web page using:
    htmldoc -f filename.pdf filename.html
which will likely produce a PDF file with no pages. To convert web page files you must use the --webpage or --continuous options at the command-line or choose Web Page or Continuous in the input tab of the GUI.

OPTIONS
The following command-line options are supported by htmldoc:

--batch filename.book
    Generates the specified book file without opening the GUI.

--bodycolor color
    Specifies the background color for all pages.

--bodyfont {courier,helvetica,monospace,sans,serif,times}

--textfont {courier,helvetica,monospace,sans,serif,times}
    Specifies the default typeface for all normal text.

--bodyimage filename
    Specifies the background image that is tiled on all pages.

--book
    Specifies that the HTML sources are structured (headings, chapters, etc.)

--bottom margin
    Specifies the bottom margin in points (no suffix or ##pt), inches (##in), centimeters (##cm), or millimeters (##mm).

--charset {cp-nnnn,iso-8859-1,...,iso-8859-15,utf-8}
    Specifies the character set to use for the output. Note: UTF-8 support is limited to the first 128 Unicode characters that are found in the input.

--color
    Specifies that PostScript or PDF output should be in color.

--continuous
    Specifies that the HTML sources are unstructured (plain web pages.) No page breaks are inserted between each file or URL in the output.

--datadir directory
    Specifies the location of the htmldoc data files, usually /usr/share/htmldoc or C:/Program Files/HTMLDOC.

--duplex
    Specifies that the output should be formatted for double-sided printing.

--effectduration {0.1...10.0}
    Specifies the duration in seconds of PDF page transition effects.

--embedfonts
    Specifies that fonts should be embedded in PDF and PostScript output.

--encryption
    Enables encryption of PDF files.

--fontsize size
    Specifies the default font size for body text.

--fontspacing spacing
    Specifies the default line spacing for body text. The line spacing is a multiplier for the font size, so a value of 1.2 will provide an additional 20% of space between the lines.

--footer fff
    Sets the page footer to use on body pages. See the HEADERS/FOOTERS FORMATS section below.

--format format

-t format
    Specifies the output format: epub, html, htmlsep (separate HTML files for each heading in the table-of-contents), ps or ps2 (PostScript Level 2), ps1 (PostScript Level 1), ps3 (PostScript Level 3), pdf11 (PDF 1.1/Acrobat 2.0), pdf12 (PDF 1.2/Acrobat 3.0), pdf or pdf13 (PDF 1.3/Acrobat 4.0), or pdf14 (PDF 1.4/Acrobat 5.0).

--gray
    Specifies that PostScript or PDF output should be grayscale.

--header fff
    Sets the page header to use on body pages. See the HEADERS/FOOTERS FORMATS section below.

--header1 fff
    Sets the page header to use on the first body/chapter page. See the HEADERS/FOOTERS FORMATS section below.

--headfootfont font
    Sets the font to use on headers and footers.

--headfootsize size
    Sets the size of the font to use on headers and footers.

--headingfont typeface
    Sets the typeface to use for headings.

--help
    Displays a summary of command-line options.

--helpdir directory
    Specifies the location of the htmldoc online help files, usually /usr/share/doc/htmldoc or C:/Program Files/HTMLDOC/DOC.

--hfimageN filename
    Specifies an image (numbered from 1 to 10) to be used in the header or footer in a PostScript or PDF document.

--jpeg[=quality]
    Sets the JPEG compression level to use for large images. A value of 0 disables JPEG compression.

--left margin
    Specifies the left margin in points (no suffix or ##pt), inches (##in), centimeters (##cm), or millimeters (##mm).

--letterhead filename
    Specifies an image to be used as a letterhead in the header or footer in a PostScript or PDF document. Note that you need to use the --header, --header1, and/or --footer options with the L parameter or use the corresponding HTML page comments to display the letterhead image in the header or footer.

--linkcolor color
    Sets the color of links.

--links
    Enables generation of links in PDF files (default).

--linkstyle {plain,underline}
    Sets the style of links.

--logoimage filename
    Specifies an image to be used as a logo in the header or footer in a PostScript or PDF document, and in the navigation bar of a HTML document. Note that you need to use the --header, --header1, and/or --footer options with the l parameter or use the corresponding HTML page comments to display the logo image in the header or footer.

--no-compression
    Disables compression of PostScript or PDF files.

--no-duplex
    Disables double-sided printing.

--no-embedfonts
    Specifies that fonts should not be embedded in PDF and PostScript output.

--no-encryption
    Disables document encryption.

--no-jpeg
    Disables JPEG compression of large images.

--no-links
    Disables generation of links in a PDF document.

--no-numbered
    Disables automatic heading numbering.

--no-pscommands
    Disables generation of PostScript setpagedevice commands.

--no-strict
    Disables strict HTML input checking.

--no-title
    Disables generation of a title page.

--no-toc
    Disables generation of a table of contents.

--numbered
    Numbers all headings in a document.

--nup pages
    Sets the number of pages that are placed on each output page. Valid values are 1, 2, 4, 6, 9, and 16.

--outdir directory

-d directory
    Specifies that output should be sent to a directory in multiple files. (Not compatible with PDF output)

--outfile filename

-f filename
    Specifies that output should be sent to a single file.

--owner-password password
    Sets the owner password for encrypted PDF files.

--pageduration I{1.0...60.0}
    Sets the view duration of a page in a PDF document.

--pageeffect effect
    Specifies the page transition effect for all pages; this attribute is ignored by all Adobe PDF viewers.

--pagelayout {single,one,twoleft,tworight}
    Specifies the initial layout of pages for a PDF file.

--pagemode {document,outlines,fullscreen}
    Specifies the initial viewing mode for a PDF file.

--path dir1;dir2;dir3;...;dirN
    Specifies a search path for files in a document.

--permissions permission[,permission,...]
    Specifies document permissions for encrypted PDF files. The following permissions are understood: all, none, annotate, no-annotate, copy, no-copy, modify, no-modify, print, and no-print. Separate multiple permissions with commas.

--pscommands
    Specifies that PostScript setpagedevice commands should be included in the output.

--quiet
    Suppresses all messages, even error messages.

--referer url
    Specifies the URL that is passed in the Referer: field of HTTP requests.

--right margin
    Specifies the right margin in points (no suffix or ##pt), inches (##in), centimeters (##cm), or millimeters (##mm).

--size pagesize
    Specifies the page size using a standard name or in points (no suffix or ##x##pt), inches (##x##in), centimeters (##x##cm), or millimeters (##x##mm). The standard sizes that are currently recognized are "letter" (8.5x11in), "legal" (8.5x14in), "a4" (210x297mm), and "universal" (8.27x11in).

--strict
    Enables strict HTML input checking.

--textcolor color
    Specifies the default color of all text.

--title
    Enables the generation of a title page.

--titlefile filename

--titleimage filename
    Specifies the file to use for the title page. If the file is an image then the title page is automatically generated using the document meta data and title image.

--tocfooter fff
    Sets the page footer to use on table-of-contents pages. See the HEADERS/FOOTERS FORMATS section below.

--tocheader fff
    Sets the page header to use on table-of-contents pages. See the HEADERS/FOOTERS FORMATS section below.

--toclevels levels
    Sets the number of levels in the table-of-contents.

--toctitle string
    Sets the title for the table-of-contents.

--top margin
    Specifies the top margin in points (no suffix or ##pt), inches (##in), centimeters (##cm), or millimeters (##mm).

--user-password password
    Specifies the user password for encryption of PDF files.

--verbose

-v  Provides verbose messages.

--version
    Displays the current version number.

--webpage
    Specifies that the HTML sources are unstructured (plain web pages.) A page break is inserted between each file or URL in the output.

EXIT STATUS
Htmldoc returns a non-zero exit status if any errors are seen, zero otherwise.

HEADER/FOOTER FORMATS
The header and footer of each page can contain up to three preformatted values. These values are specified using a single character for the left, middle, and right of the page, resulting in the fff notation shown previously.

Each character can be one of the following:

.   blank

/   n/N arabic page numbers (1/3, 2/3, 3/3)

:   c/C arabic chapter page numbers (1/2, 2/2, 1/4, 2/4, ...)

1   arabic numbers (1, 2, 3, ...)

a   lowercase letters

A   uppercase letters

c   current chapter heading

C   current chapter page number (arabic)

d   current date

D   current date and time

h   current heading

i   lowercase roman numerals

I   uppercase roman numerals

l   logo image

L   logo image as letterhead - the image is inserted at its maximum size

t   title text

T   current time

u   current filename or URL

ENVIRONMENT
HTMLDOC looks for several environment variables which can override the default directories, display additional debugging information, and disable CGI mode:

HTMLDOC_DATA
    This environment variable specifies the location of htmldoc's data and fonts directories, normally /usr/share/htmldoc or C:/Program Files/HTMLDOC.

HTMLDOC_DEBUG
    This environment variable enables debugging information that is sent to stderr. The value is a list of any of the following keywords separated by spaces: "all", "links", "memory", "remotebytes", "table", "tempfiles", and/or "timing".

HTMLDOC_HELP
    This environment variable specifies the location of htmldoc's documentation directory, normally /usr/share/doc/htmldoc or C:/Program Files/HTMLDOC/doc.

HTMLDOC_NOCGI
    This environment variable, when set (the value doesn't matter), disables CGI mode. It is most useful for using htmldoc on a web server from a scripting language or invocation from a program.

EXAMPLES
Create a PDF file from a web site:
    htmldoc --webpage -f example.pdf http://www.example.com/
Create a PostScript book from a directory of HTML files
    htmldoc --book -f example.pdf *.html

SEE ALSO
HTMLDOC Users Manual

https://www.msweet.org/htmldoc

AUTHOR
Michael R Sweet

LEGAL STUFF
HTMLDOC is copyright © 1997-2021 by Michael R Sweet.

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License version 2 as published by the Free Software Foundation.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.