dt-15.14-2.el7 'dt' is a generic data test program used to verify proper operation of peripherals and for obtaining performance information. Since verification of data is performed, 'dt' can be thought of as a generic diagnostic tool. 'dt' command lines are similar to the 'dd' program, which is popular on most UNIX systems. It contains numerous options to give the user complete control of the test parameters. 'dt' has been used to successfully test disks, tapes, serial lines, parallel lines, pipes, and memory mapped files. In fact, 'dt' can be used for any device which allows the standard open, read, write, & close system calls. Special support is necessary for some devices, such as serial lines, for setting up the speed, parity, data bits, etc. Avaliable documentation is located in /usr/doc/dt-15.14. Sample scripts and config data are installed in /usr/share/dt. Scientific Linux Hardware Tests Scientific Linux Hardware Tests 7 dt-15.14-2.el7.x86_64.rpm f120b4b349e93ab1880ac8901401bbbef7e60a61ffaae40c5082b0f46411e7e5 stress-0.18.8-1.4.el7 Stress is a tool which imposes a configurable amount of CPU, memory, I/O, or disk stress on a POSIX-compliant operating system. Stress is written in highly-portable ANSI C, and uses the GNU Autotools to compile on a great number of UNIX-like operating systems. Stress is not a benchmark, it is rather a tool which puts the system under a repeatable, defined amount of load so that a systems programmer or system administrator can analyze the performance characteristics of the system or specific components thereof. Scientific Linux Hardware Tests Scientific Linux Hardware Tests 7 stress-0.18.8-1.4.el7.x86_64.rpm 1d881f9964e17f8a452ee70434b2211f6af2bb85520b1cf57dc4df873eb38da8