/* * This file is split out from config.c for easier editing */ /* * tbpath and tbtype are used to build the complete set of paths for finding * modules, but only when we search for individual directories, they are not * used for [boot] and [toplevel] searches. */ static char *tbpath[] = { "/lib/modules", NULL /* marks the end of the list! */ }; char *tbtype[] = { "kernel", /* as of 2.3.14 this must be first */ "fs", "net", "scsi", "block", "cdrom", "ipv4", "ipv6", "sound", "fc4", "video", "misc", "pcmcia", "atm", "usb", "ide", "ieee1394", "mtd", NULL /* marks the end of the list! */ }; /* * This is the list of pre-defined aliases. * Each entry can be overridden by an entry in /etc/modules.conf */ char *aliaslist[] = { "binfmt-204 binfmt_aout", "binfmt-263 binfmt_aout", "binfmt-264 binfmt_aout", "binfmt-267 binfmt_aout", "binfmt-387 binfmt_aout", "binfmt-332 iBCS", "binfmt--310 binfmt_java", "block-major-1 rd", "block-major-2 floppy", "block-major-3 ide-probe", "block-major-7 loop", "block-major-8 sd_mod", "block-major-9 md", /* For modular RAID */ "block-major-11 sr_mod", "block-major-13 xd", "block-major-15 cdu31a", "block-major-16 gscd", "block-major-17 optcd", "block-major-18 sjcd", "block-major-20 mcdx", "block-major-22 ide-probe", "block-major-23 mcd", "block-major-24 sonycd535", "block-major-25 sbpcd", "block-major-26 sbpcd", "block-major-27 sbpcd", "block-major-29 aztcd", "block-major-32 cm206", "block-major-33 ide-probe", "block-major-34 ide-probe", "block-major-37 ide-tape", "block-major-44 ftl", /* from David Woodhouse */ "block-major-93 nftl", /* from David Woodhouse */ "char-major-4 serial", "char-major-5 serial", "char-major-6 lp", "char-major-9 st", "char-major-10 off", /* was: mouse, was: misc */ "char-major-10-0 busmouse", /* /dev/logibm Logitech bus mouse */ "char-major-10-1 off", /* /dev/psaux PS/2-style mouse port */ "char-major-10-2 msbusmouse", /* /dev/inportbm Microsoft Inport bus mouse */ "char-major-10-3 atixlmouse", /* /dev/atibm ATI XL bus mouse */ /* /dev/jbm J-mouse */ /* /dev/amigamouse Amiga mouse (68k/Amiga) */ /* /dev/atarimouse Atari mouse */ /* /dev/sunmouse Sun mouse */ /* /dev/beep Fancy beep device */ /* /dev/modreq Kernel module load request */ "char-major-10-130 wdt", /* /dev/watchdog Watchdog timer port */ "char-major-10-131 wdt", /* /dev/temperature Machine internal temperature */ /* /dev/hwtrap Hardware fault trap */ /* /dev/exttrp External device trap */ "char-major-10-135 off", /* rtc cannot be compiled as a module */ "char-major-10-139 openprom", /* /dev/openprom Linux/Sparc interface */ "char-major-10-144 nvram", /* from Tigran Aivazian */ "char-major-10-157 applicom", /* from David Woodhouse */ "char-major-10-175 agpgart", /* /dev/agpgart GART AGP mapping access */ "char-major-14 soundcore", "char-major-19 cyclades", "char-major-20 cyclades", "char-major-21 sg", "char-major-22 pcxx", /* ?? */ "char-major-23 pcxx", /* ?? */ "char-major-27 ftape", "char-major-34 scc", "char-major-35 tclmidi", "char-major-36 netlink", "char-major-37 ide-tape", "char-major-48 riscom8", "char-major-49 riscom8", "char-major-57 esp", "char-major-58 esp", "char-major-63 kdebug", "char-major-90 mtdchar", /* from David Woodhouse */ "char-major-99 ppdev", "char-major-107 3dfx", /* from Tigran Aivazian */ "char-major-161 ircomm-tty", "dos msdos", "dummy0 dummy", "dummy1 dummy", "eth0 off", "iso9660 isofs", "md-personality-1 linear", "md-personality-2 raid0", "md-personality-3 raid1", "md-personality-4 raid5", "net-pf-1 unix", /* PF_UNIX 1 Unix domain sockets */ "net-pf-2 ipv4", /* PF_INET 2 Internet IP Protocol */ "net-pf-3 off", /* PF_AX25 3 Amateur Radio AX.25 */ "net-pf-4 ipx", /* PF_IPX 4 Novell IPX */ "net-pf-5 appletalk", /* PF_APPLETALK 5 Appletalk DDP */ "net-pf-6 off", /* PF_NETROM 6 Amateur radio NetROM */ /* PF_BRIDGE 7 Multiprotocol bridge */ /* PF_AAL5 8 Reserved for Werner's ATM */ /* PF_X25 9 Reserved for X.25 project */ /* PF_INET6 10 IP version 6 */ /* next two from Thanks! */ "net-pf-17 af_packet", "net-pf-19 off", /* acorn econet */ "netalias-2 ip_alias", "plip0 plip", "plip1 plip", "cipcb0 cipcb", "cipcb1 cipcb", "cipcb2 cipcb", "cipcb3 cipcb", "ppp0 ppp", "ppp1 ppp", "scsi_hostadapter off", /* if not in config file */ "slip0 slip", "slip1 slip", "tty-ldisc-1 slip", "tty-ldisc-3 ppp", "ppp-compress-21 bsd_comp", "ppp-compress-24 ppp_deflate", "ppp-compress-26 ppp_deflate", #ifndef __sparc__ "parport_lowlevel parport_pc", #else "parport_lowlevel parport_ax", #endif "tty-ldisc-11 irtty", NULL /* marks the end of the list! */ }; /* * This is the list of pre-defined options. * Each entry can be overridden by an entry in /etc/modules.conf */ char *optlist[] = { "dummy0 -o dummy0", "dummy1 -o dummy1", "sb io=0x220 irq=7 dma=1 dma16=5 mpu_io=0x330", NULL /* marks the end of the list! */ }; /* * This is the list of pre-defined "above"s, * used for pull-in of additional modules * Each entry can be overridden by an entry in /etc/modules.conf */ char *above[] = { NULL /* marks the end of the list! */ }; /* * This is the list of pre-defined "below"s, * used for push-in of additional modules * Each entry can be overridden by an entry in /etc/modules.conf */ char *below[] = { NULL /* marks the end of the list! */ }; /* * This is the list of pre-defined "prune"s, * used to exclude paths from scan of /lib/modules. * /etc/modules.conf can add entries but not remove them. */ char *prune[] = { "modules.dep", "modules.pcimap", "modules.isapnpmap", "modules.usbmap", "System.map", ".config", "build", /* symlink to source tree */ "vmlinux", "vmlinuz", "bzImage", "zImage", ".rhkmvtag", /* wish RedHat had told me before they did this */ NULL /* marks the end of the list! */ };